인덱스 예제 목록

설명서의 모든 예 목록

• Example#0 - 소개 예
• Example#1 - 첫 번째 PHP 스크립트: hello.php
• Example#2 - PHP에서 시스템 정보 가져오기
• Example#3 - 변수 인쇄(배열 요소)
• Example#4 - 제어 구조 및 함수 사용 예
• Example#5 - HTML 및 PHP 모드 혼합
• Example#6 - 간단한 HTML 양식
• Example#7 - 양식에서 데이터 인쇄
• Example#8 - Partial lighttpd.conf
• Example#9 - FastCGI 응답자 생성
• Example#10 - 원격 php-fastcgi 인스턴스에 연결
• Example#11 - OpenBSD 패키지 설치 예
• Example#12 - Apache 2를 사용한 데비안 설치 예
• Example#13 - PHP가 설치된 후 Apache 중지 및 시작
• Example#14 - 추가 PHP 패키지 목록 메서드
• Example#15 - MySQL, cURL과 함께 PHP 설치
• Example#16 - 권장 OpCache 구성
• Example#17 - 권장 WinCache 구성
• Example#18 - IIS 및 PHP를 구성하는 명령줄
• Example#19 - 레지스트리 변경
• Example#20 - 핸들러로서의 PHP 및 Apache 2.x
• Example#21 - PHP 및 Apache 2.x를 CGI로 사용
• Example#22 - PHP를 FastCGI로 실행하도록 Apache 구성
• Example#23 - 환경 변수 및 PHP 설정을 풀에 전달
• Example#24 - nginx.conf에서 PHP 설정 지정
• Example#25 - phpinfo 호출
• Example#26 - php.ini 환경 변수
• Example#27 - php.ini 예제
• Example#28 - 아파치 구성 예
• Example#29 - PHP 열기 및 닫기 태그
• Example#30 - 조건을 사용한 고급 이스케이프
• Example#31 - 후행 줄 바꿈을 포함하는 닫는 태그를 보여주는 예
• Example#32 - 정수 리터럴
• Example#33 - 32비트 시스템의 정수 오버플로
• Example#34 - 64비트 시스템의 정수 오버플로
• Example#35 - PHP 7.3.0의 기본 Heredoc 예제
• Example#36 - 닫는 식별자는 본문의 줄보다 더 들여쓰면 안 됩니다.
• Example#37 - 본문(공백) 닫기 식별자에 대한 다른 들여쓰기
• Example#38 - 닫는 식별자 뒤에 표현식 계속하기
• Example#39 - 문자열 본문에서 식별자를 닫으면 ParseError가 발생하는 경향이 있습니다.
• Example#40 - 잘못된 예, PHP 7.3.0 이전
• Example#41 - PHP 7.3.0 이전의 경우에도 유효한 예
• Example#42 - Heredoc 문자열 인용 예제
• Example#43 - 인수 예제의 Heredoc
• Example#44 - Heredoc을 사용하여 정적 값 초기화
• Example#45 - Heredoc에서 큰따옴표 사용하기
• Example#46 - Nowdoc 문자열 인용 예제
• Example#47 - 변수가 있는 Nowdoc 문자열 인용 예제
• Example#48 - 정적 데이터 예
• Example#49 - 간단한 구문 예제
• Example#50 - 음수 인덱스
• Example#51 - 일부 문자열 예
• Example#52 - 잘못된 문자열 오프셋의 예
• Example#53 - 간단한 배열
• Example#54 - 유형 캐스팅 및 덮어쓰기 예
• Example#55 - 혼합 int 및 string 키
• Example#56 - 키가 없는 인덱스 배열
• Example#57 - 모든 요소에 없는 키
• Example#58 - 복합 유형 캐스팅 및 덮어쓰기 예제
• Example#59 - 배열 요소 액세스
• Example#60 - 배열 역참조
• Example#61 - 간단한 배열 풀기
• Example#62 - 중복 키로 배열 풀기
• Example#63 - array() 사용
• Example#64 - Collection
• Example#65 - 루프에서 요소 변경
• Example#66 - 1 기반 인덱스
• Example#67 - 배열 채우기
• Example#68 - 배열 정렬
• Example#69 - 재귀 및 다차원 배열
• Example#70 - 반복 가능한 매개변수 유형 예
• Example#71 - 반복 가능한 매개변수 기본값 예
• Example#72 - 반복 가능한 반환 유형 예제
• Example#73 - 반복 가능한 생성기 반환 유형 예제
• Example#74 - 콜백 함수 예제
• Example#75 - 클로저를 사용한 콜백 예제
• Example#76 -
• Example#77 - 기본 클래스 유형 선언
• Example#78 - 기본 인터페이스 유형 선언
• Example#79 - 기본 반환 유형 선언
• Example#80 - 객체 반환
• Example#81 - Nullable 인수 유형 선언
• Example#82 - nullable 반환 유형 선언
• Example#83 - 인수를 nullable로 만드는 오래된 방법
• Example#84 - 인수 값에 대한 엄격한 입력
• Example#85 - 인수 값에 대한 강제 입력
• Example#86 - 반환 값에 대한 엄격한 입력
• Example#87 - 유형이 공용체의 유형 부분으로 강제 변환되는 예
• Example#88 - 형식화된 참조에 의한 전달 매개변수
• Example#89 - TypeError 잡기
• Example#90 - 초기화되지 않은 변수의 기본값
• Example#91 - global 사용
• Example#92 - global 대신 $GLOBALS 사용
• Example#93 - superglobals과 scope를 보여주는 예
• Example#94 - 정적 변수의 필요성을 보여주는 예
• Example#95 - 정적 변수의 사용 예
• Example#96 - 재귀 함수가 있는 정적 변수
• Example#97 - 정적 변수 선언
• Example#98 - 상속된 메서드에서 정적 변수 사용
• Example#99 - 변수 속성 예
• Example#100 - 간단한 HTML 양식
• Example#101 - 간단한 POST HTML 양식에서 데이터 액세스
• Example#102 - 더 복잡한 양식 변수
• Example#103 - setcookie의 예
• Example#104 - 유효하고 유효하지 않은 상수 이름
• Example#105 - 상수 정의
• Example#106 - const 키워드를 사용하여 상수 정의
• Example#107 - 연관성
• Example#108 - Undefined 평가 순서
• Example#109 - +, - 및 . 동일한 우선 순위를 갖습니다(PHP 8.0.0 이전)
• Example#110 - 참조로 할당
• Example#111 - 정수에 대한 비트 AND, OR 및 XOR 연산
• Example#112 - 문자열에 대한 비트 XOR 연산
• Example#113 - 정수에 대한 비트 시프팅
• Example#114 - Boolean/null 비교
• Example#115 - 표준 배열 비교의 전사
• Example#116 - 기본값 할당
• Example#117 - 불분명한 삼항 동작
• Example#118 - 단기 체이닝
• Example#119 - 기본값 할당
• Example#120 - 중첩 null 병합 연산자
• Example#121 - 문자 변수에 대한 산술 연산
• Example#122 - 설명된 논리 연산자
• Example#123 - 배열 비교
• Example#124 - 클래스와 함께 instanceof 사용
• Example#125 - 상속된 클래스와 함께 instanceof 사용
• Example#126 - instanceof를 사용하여 객체가 클래스의 instanceof가 아닌지 확인
• Example#127 - 인터페이스와 함께 instanceof 사용
• Example#128 - 다른 변수와 함께 instanceof 사용하기
• Example#129 - instanceof를 사용하여 다른 변수 테스트
• Example#130 - instanceof를 사용하여 상수 테스트
• Example#131 - 임의의 표현식과 함께 instanceof 사용
• Example#132 - 스위치 구조
• Example#133 - 기본 매치 사용법
• Example#134 - 일치 표현식의 구조
• Example#135 - 처리되지 않은 일치 표현식의 예
• Example#136 - 일반화된 일치 표현식을 사용하여 정수 범위에서 분기
• Example#137 - 일반화된 일치 표현식을 사용하여 문자열 콘텐츠에서 분기
• Example#138 - 틱 사용 예
• Example#139 - 스크립트에 대한 인코딩을 선언합니다.
• Example#140 - 기본 include 예
• Example#141 - 함수 내 include
• Example#142 - HTTP를 통해 include
• Example#143 - include의 반환 값 비교
• Example#144 - include 및 return 문
• Example#145 - 출력 버퍼링을 사용하여 PHP 파일을 문자열에 포함
• Example#146 - goto 예제
• Example#147 - goto loop 예제
• Example#148 - 이것은 작동하지 않습니다
• Example#149 - 함수 사용을 보여주기 위한 의사 코드
• Example#150 - 조건부 함수
• Example#151 - 함수 내의 함수
• Example#152 - 재귀 함수
• Example#153 - 함수에 배열 전달
• Example#154 - 후행 쉼표가 있는 함수 인수 목록
• Example#155 - 참조로 함수 매개변수 전달
• Example#156 - 함수에서 기본 매개변수 사용
• Example#157 - 비 스칼라 유형을 기본값으로 사용
• Example#158 - 객체를 기본값으로 사용(PHP 8.1.0부터)
• Example#159 - 기본 함수 인수의 잘못된 사용
• Example#160 - 기본 함수 인수의 올바른 사용법
• Example#161 - 기본 함수 인수의 올바른 사용법
• Example#162 - 필수 인수 뒤에 선택적 인수 선언
• Example#163 - ...를 사용하여 변수 인수에 액세스
• Example#164 - ...를 사용하여 인수 제공
• Example#165 - 유형 선언 변수 인수
• Example#166 - 이전 PHP 버전에서 변수 인수 액세스
• Example#167 - 명명된 인수 구문
• Example#168 - 위치 인수 대 명명된 인수
• Example#169 - 매개변수 순서가 다른 위와 동일한 예
• Example#170 - 명명된 인수와 위치 인수 결합
• Example#171 - 동일한 매개변수를 여러 번 전달할 때 오류가 발생했습니다.
• Example#172 - 압축을 푼 후 명명된 인수 사용
• Example#173 - return의 사용
• Example#174 - 여러 값을 얻기 위해 배열 반환
• Example#175 - 함수에서 참조 반환
• Example#176 - 변수 함수 예
• Example#177 - 변수 메소드 예
• Example#178 - 정적 속성이 있는 변수 메서드 예제
• Example#179 - Complex callables
• Example#180 -
• Example#181 - 익명 함수 예
• Example#182 - 익명 함수 변수 할당 예
• Example#183 - 상위 범위에서 변수 상속
• Example#184 - Closures 및 scoping
• Example#185 - $this의 자동 바인딩
• Example#186 - 정적 익명 함수 내에서 $this 사용 시도
• Example#187 - 정적 익명 함수에 개체 바인딩 시도
• Example#188 - 화살표 함수는 값으로 변수를 자동으로 캡처합니다.
• Example#189 - 화살표 함수는 중첩된 경우에도 값으로 변수를 자동으로 캡처합니다.
• Example#190 - 화살표 함수의 예
• Example#191 - 외부 범위의 값은 화살표 함수로 수정할 수 없습니다.
• Example#192 - 간단한 일급 호출 가능 구문
• Example#193 - CallableExpr(...)과 기존 콜러블의 범위 비교
• Example#194 -
• Example#195 - 단순 클래스 정의
• Example#196 - $this 의사 변수의 몇 가지 예
• Example#197 - 인스턴스 만들기
• Example#198 - 임의의 표현식을 사용하여 인스턴스 생성
• Example#199 - 개체 할당
• Example#200 - 새 개체 만들기
• Example#201 - 새로 생성된 객체의 접근 멤버
• Example#202 - 속성 액세스 대 메서드 호출
• Example#203 - 속성에 저장된 익명 함수 호출
• Example#204 - 단순 클래스 상속
• Example#205 - 호환되는 자식 메서드
• Example#206 - 자식 메서드가 매개변수를 제거할 때 치명적인 오류
• Example#207 - 자식 메서드가 선택적 매개변수를 필수로 만들 때 치명적인 오류가 발생합니다.
• Example#208 - 명명된 인수를 사용할 때 오류가 발생하고 매개변수의 이름이 하위 클래스에서 변경되었습니다.
• Example#209 - 클래스 이름 확인
• Example#210 - 클래스 이름 확인 누락
• Example#211 - 개체 이름 확인
• Example#212 - 널세이프 연산자
• Example#213 - 속성 선언
• Example#214 - 유형이 지정된 속성의 예
• Example#215 - 속성 액세스
• Example#216 - 읽기 전용 속성의 예
• Example#217 - 읽기 전용 속성의 잘못된 초기화
• Example#218 -
• Example#219 -
• Example#220 -
• Example#221 - 상수 정의 및 사용
• Example#222 - 네임스페이스 :: 클래스 예제
• Example#223 - 클래스 상수 표현식 예제
• Example#224 - PHP 7.1.0부터 클래스 상수 가시성 수정자
• Example#225 - Autoload 예
• Example#226 - Autoload 다른 예
• Example#227 - 상속의 생성자
• Example#228 - 생성자 인수 사용
• Example#229 - 생성자 속성 승격 사용
• Example#230 - 이니셜라이저에서 new 사용
• Example#231 - 정적 생성 메서드 사용
• Example#232 - 소멸자 예제
• Example#233 - 속성 선언
• Example#234 - 메소드 선언
• Example#235 - PHP 7.1.0부터 상수 선언
• Example#236 - 동일한 개체 유형의 비공개 멤버 액세스
• Example#237 -
• Example#238 - 상속 예
• Example#239 - 재정의 메서드는 반환 유형을 선언하지 않습니다.
• Example#240 - 재정의 메서드가 잘못된 반환 유형을 선언합니다.
• Example#241 - 재정의 메서드는 사용 중단 알림 없이 잘못된 반환 유형을 선언합니다.
• Example#242 - :: 클래스 정의 외부에서
• Example#243 - :: 클래스 정의 내부에서
• Example#244 - 부모의 메소드 호출
• Example#245 - 정적 메서드 예제
• Example#246 - 정적 속성 예
• Example#247 - 추상 클래스 예제
• Example#248 - 추상 클래스 예제
• Example#249 - 인터페이스 예
• Example#250 - 확장 가능한 인터페이스
• Example#251 - 다중 인터페이스 상속
• Example#252 - 상수가 있는 인터페이스
• Example#253 - 추상 클래스가 있는 인터페이스
• Example#254 - 확장과 동시에 구현
• Example#255 - Trait 예
• Example#256 - 우선 순위 예
• Example#257 - 대체 우선 순위 예
• Example#258 - 다중 Trait 사용
• Example#259 - 갈등 해결
• Example#260 - 분석법 가시성 변경
• Example#261 - Trait으로 구성된 Trait
• Example#262 - 추상 메서드로 요구사항 표현하기
• Example#263 - 정적 변수
• Example#264 - 정적 메서드
• Example#265 - 정적 속성
• Example#266 - 속성 정의
• Example#267 - 갈등 해결
• Example#268 - __get(), __set(), __isset() 및 __unset() 메서드를 통한 속성 오버로드
• Example#269 - __call() 및 __callStatic() 메서드를 통한 메서드 오버로딩
• Example#270 - 단순 객체 반복
• Example#271 - Sleep과 wakeup
• Example#272 - Serialize 및 unserialize
• Example#273 - 간단한 예
• Example#274 - __invoke() 사용
• Example#275 - __invoke() 사용
• Example#276 - __set_state() 사용
• Example#277 - __debugInfo() 사용
• Example#278 - Final 메서드 예
• Example#279 - Final class 예
• Example#280 - PHP 8.1.0의 Final 상수 예제
• Example#281 - 개체 복제
• Example#282 - 새로 복제된 개체의 액세스 구성원
• Example#283 - 객체 비교의 예
• Example#284 - self:: 사용법
• Example#285 - static:: 간단한 사용법
• Example#286 - static:: 비정적 컨텍스트에서 사용
• Example#287 - Forwarding and non-forwarding calls
• Example#288 - 참조 및 개체
• Example#289 - 네임스페이스 구문 예
• Example#290 - 단일 네임스페이스 선언
• Example#291 - 단일 네임스페이스 선언
• Example#292 - 계층이 있는 단일 네임스페이스 선언
• Example#293 - 다중 네임스페이스 선언, 간단한 조합 구문
• Example#294 - 여러 네임스페이스 선언, 대괄호 구문
• Example#295 - 여러 네임스페이스 및 네임스페이스 없는 코드 선언
• Example#296 - 여러 네임스페이스 및 네임스페이스 없는 코드 선언
• Example#297 - 네임스페이스 내에서 전역 클래스, 함수 및 상수 액세스
• Example#298 - 동적으로 요소에 액세스
• Example#299 - 네임스페이스 요소에 동적으로 액세스
• Example#300 - __NAMESPACE__ 예제, 네임스페이스 코드
• Example#301 - __NAMESPACE__ 예, 전역 코드
• Example#302 - 동적 이름 구성에 __NAMESPACE__ 사용
• Example#303 - 네임스페이스 연산자, 네임스페이스 내부
• Example#304 - 전역 코드의 네임스페이스 연산자
• Example#305 - use 연산자로 importing/aliasing
• Example#306 - use 연산자로 가져오기/앨리어싱, 여러 use 문 결합
• Example#307 - 가져오기 및 동적 이름
• Example#308 - 가져오기 및 정규화된 이름
• Example#309 - Illegal importing rule
• Example#310 - 전역 공간 사양 사용
• Example#311 - 네임스페이스 내 전역 클래스 액세스
• Example#312 - 네임스페이스 내부의 전역 함수/상수 대체
• Example#313 - 설명된 이름 확인
• Example#314 - 네임스페이스 외부의 전역 클래스 액세스
• Example#315 - 네임스페이스 외부의 전역 클래스 액세스
• Example#316 - 네임스페이스의 내부 클래스 액세스
• Example#317 - 네임스페이스의 내부 클래스, 함수 또는 상수 액세스
• Example#318 - 정규화된 이름
• Example#319 - 자격 있는 이름
• Example#320 - 정규화되지 않은 클래스 이름
• Example#321 - 규정되지 않은 함수 또는 상수 이름
• Example#322 - 큰따옴표로 묶인 문자열 내에서 네임스페이스 이름을 사용할 때의 위험
• Example#323 - Undefined 상수
• Example#324 - Undefined 상수
• Example#325 - 기본 제한 값
• Example#326 - 고급 배타적 값
• Example#327 - 내장 예외 클래스
• Example#328 - Exception 클래스 확장
• Example#329 - 오류 보고를 예외로 변환
• Example#330 - 예외 던지기
• Example#331 - finally 블록을 사용한 예외 처리
• Example#332 - finally 블록과 반환 간의 상호 작용
• Example#333 - 중첩 예외
• Example#334 - 다중 catch 예외 처리
• Example#335 - 잡힌 변수 생략
• Example#336 - 표현식으로 던지기
• Example#337 - 기본 사용법
• Example#338 - 범위를 생성기로 구현
• Example#339 - 값을 산출하는 간단한 예
• Example#340 - 키/값 쌍 생성
• Example#341 - null을 반환
• Example#342 - 참조에 의한 수익 값
• Example#343 - iterator_to_array로 수익률
• Example#344 - yield의 기본 사용
• Example#345 - 수익률 및 반환 값
• Example#346 - 속성을 사용하여 인터페이스의 선택적 메서드 구현
• Example#347 - 속성 구문
• Example#348 - Reflection API를 사용하여 속성 읽기
• Example#349 - Reflection API를 사용하여 특정 속성 읽기
• Example#350 - 단순 속성 클래스
• Example#351 - 대상 사양을 사용하여 속성을 사용할 수 있는 위치 제한
• Example#352 - IS_REPEATABLE을 사용하여 선언에 속성을 여러 번 허용
• Example#353 - 정의되지 않은 변수와 함께 참조 사용
• Example#354 - 함수 내 전역 변수 참조
• Example#355 - 참조 및 foreach 문
• Example#356 - $GLOBALS 예시
• Example#357 - 전체 $GLOBALS를 쓰면 오류가 발생합니다.
• Example#358 - $_SERVER 예
• Example#359 - $_GET 예
• Example#360 - $_POST 예
• Example#361 - $_ENV 예
• Example#362 - $_COOKIE 예
• Example#363 - $php_errormsg 예
• Example#364 - $http_response_header 예
• Example#365 - $argc 예
• Example#366 - $argv 예
• Example#367 - Exception::getMessage 예
• Example#368 - Exception::getPrevious 예
• Example#369 - Exception::getCode 예
• Example#370 - Exception::getFile 예
• Example#371 - Exception::getLine 예
• Example#372 - Exception::getTrace 예
• Example#373 - Exception::getTraceAsString 예
• Example#374 - Exception::__toString 예
• Example#375 - set_error_handler를 사용하여 오류 메시지를 ErrorException으로 변경합니다.
• Example#376 - ErrorException::getSeverity 예
• Example#377 - Error::getMessage 예
• Example#378 - Error::getPrevious 예
• Example#379 - Error::getCode 예
• Example#380 - Error::getFile 예
• Example#381 - Error::getLine 예
• Example#382 - Error::getTrace 예
• Example#383 - Error::getTraceAsString 예
• Example#384 - Error::__toString 예
• Example#385 - 기본 사용법
• Example#386 - 기본 사용법
• Example#387 - 기본 사용법
• Example#388 - ArrayAccess::offsetExists 예
• Example#389 - Basic usage
• Example#390 - Closure::bind 예
• Example#391 - Closure::bindTo 예
• Example#392 - Closure::call 예
• Example#393 - 객체에 대한 유형 변환의 결과로 생성됨
• Example#394 - json_decode의 결과로 생성됨
• Example#395 - 동적 속성 선언
• Example#396 - Generator::getReturn 예
• Example#397 - Generator::key 예
• Example#398 - Generator::send를 사용하여 값 주입
• Example#399 - 제너레이터에 예외 던지기
• Example#400 - 기본 WeakReference 사용
• Example#401 - Weakmap 사용 예
• Example#402 - 기본 스트링 가능 사용법
• Example#403 - 기본 사용법
• Example#404 - 기본 사용법
• Example#405 - 기본 사용법
• Example#406 - 기본 bindto 사용 예
• Example#407 - 페이지 가져오기 및 POST 데이터 보내기
• Example#408 - 디렉션을 무시하고 헤더와 콘텐츠를 가져옵니다.
• Example#409 - 페이지 가져오기 및 POST 데이터 보내기
• Example#410 - 기본 비밀번호 사용 예
• Example#411 - 리디렉션 후 어떤 URL에 도달했는지 감지
• Example#412 - php://temp/maxmemory
• Example#413 - php://filter/resource=<stream to be filtered>
• Example#414 - php://filter/read=<filter list to apply to read chain>
• Example#415 - php://filter/write=<filter list to apply to write chain>
• Example#416 - php://memory and php://temp are not reusable
• Example#417 - ata:// 내용 인쇄
• Example#418 - 미디어 유형 가져오기
• Example#419 - 기본 사용법
• Example#420 - 활성 연결에서 스트림 열기
• Example#421 - 이 $session 변수를 계속 사용할 수 있어야 합니다!
• Example#422 - RAR 아카이브 탐색
• Example#423 - 암호화된 파일 열기(헤더 암호화)
• Example#424 - 잘못된 변수 검사로 이어집니다....
• Example#425 - ... 파일 시스템 공격
• Example#426 - 보다 안전한 파일 이름 확인
• Example#427 - 보다 안전한 파일 이름 확인
• Example#428 - 널 바이트에 취약한 스크립트
• Example#429 - 입력의 올바른 유효성 검사
• Example#430 - 해싱 비밀번호 필드
• Example#431 - 결과 집합을 페이지로 분할 ... 및 수퍼유저 만들기(PostgreSQL)
• Example#432 - 기사 나열 ... 및 일부 암호(모든 데이터베이스 서버)
• Example#433 - 암호 재설정에서 ... 더 많은 권한 얻기까지(모든 데이터베이스 서버)
• Example#434 - 데이터베이스 호스트 운영 체제(MSSQL Server) 공격
• Example#435 - 페이징을 위한 쿼리를 작성하는 보다 안전한 방법
• Example#436 - 사용자 정의 HTML 페이지로 변수 공격하기
• Example#437 - 일반적인 디버깅 변수 활용
• Example#438 - E_ALL로 위험한 변수 찾기
• Example#439 - 위험한 변수 사용
• Example#440 - PHP를 다른 언어로 숨기기
• Example#441 - PHP 확장에 알 수 없는 유형 사용
• Example#442 - PHP 확장에 HTML 유형 사용
• Example#443 - 기본 HTTP 인증 예
• Example#444 - 다이제스트 HTTP 인증 예시
• Example#445 - 새 이름/암호를 강제로 적용하는 HTTP 인증 예
• Example#446 - A 간단한 XForms 검색 양식
• Example#447 - XForm을 사용하여 $_POST 채우기
• Example#448 - 파일 업로드 양식
• Example#449 - 파일 업로드 확인
• Example#450 - 파일 배열 업로드
• Example#451 - 여러 파일 업로드
• Example#452 - 전체 디렉토리 업로드
• Example#453 - HTTP PUT 파일 저장
• Example#454 - 원격 페이지의 제목 얻기
• Example#455 - 원격 서버에 데이터 저장
• Example#456 - CGI SAPI와의 차이점을 보여주는 예:
• Example#457 -
• Example#458 - 내장(및 로드) PHP 및 Zend 모듈 인쇄
• Example#459 - 큰따옴표를 사용할 때 구문 오류 발생
• Example#460 - 작은 따옴표를 사용하여 쉘의 변수 대체 방지
• Example#461 - -B, -R 및 -E 옵션을 사용하여 프로젝트의 줄 수를 계산합니다.
• Example#462 - -v를 사용하여 SAPI 이름과 PHP 및 Zend 버전 가져오기
• Example#463 - --ini 예제
• Example#464 - 기본 --rf 사용법
• Example#465 - --rc 예제
• Example#466 - --re 예제
• Example#467 - --ri 예제
• Example#468 - PHP 스크립트를 쉘 스크립트로 실행
• Example#469 - 명령줄(script.php)에서 실행하기 위한 스크립트
• Example#470 - 명령줄 PHP 스크립트(script.bat)를 실행하기 위한 배치 파일
• Example#471 - 대화형 셸을 사용하여 코드 실행
• Example#472 - 탭 완성
• Example#473 - 대화형 셸에서 php.ini 설정 지정
• Example#474 - 웹 서버 시작
• Example#475 - 특정 문서 루트 디렉토리로 시작
• Example#476 - 라우터 스크립트 사용
• Example#477 - CLI 웹 서버 사용 확인
• Example#478 - 지원되지 않는 파일 형식 처리
• Example#479 - 원격 시스템에서 CLI 웹 서버에 액세스
• Example#480 - 새 zval 컨테이너 만들기
• Example#481 - zval 정보 표시
• Example#482 - zval의 refcount 증가
• Example#483 - zval 참조 횟수 감소
• Example#484 - 배열 zval 만들기
• Example#485 - 이미 존재하는 요소를 배열에 추가하기
• Example#486 - 배열에서 요소 제거
• Example#487 - 배열 자체를 자체 요소로 추가
• Example#488 - $a 설정 해제
• Example#489 - 메모리 사용 예
• Example#490 - GC 성능 영향
• Example#491 - 위 스크립트 실행
• Example#492 - GC 벤치마킹을 활성화하기 위해 PHP 재컴파일
• Example#493 - GC 통계
• Example#494 - DTrace로 모든 PHP 정적 프로브를 추적하기 위한 all_probes.d
• Example#495 - SystemTap으로 모든 PHP 정적 프로브를 추적하기 위한 all_probes.stp
• Example#496 - apcu_add 예제
• Example#497 - apcu_cache_info 예제
• Example#498 - apcu_cas 예제
• Example#499 - apcu_dec 예제
• Example#500 - apcu_delete 예제
• Example#501 - apcu_entry 예제
• Example#502 - apcu_exists 예제
• Example#503 - apcu_fetch 예제
• Example#504 - apcu_inc 예제
• Example#505 - apcu_key_info 예제
• Example#506 - apcu_sma_info 예제
• Example#507 - apcu_store 예제
• Example#508 - APCUIterator::__construct 예제
• Example#509 - 스크립트에서 오류 처리 사용
• Example#510 - debug_backtrace 예제
• Example#511 - debug_print_backtrace 예제
• Example#512 - An error_clear_last 예제
• Example#513 - An error_get_last 예제
• Example#514 - error_log 예제
• Example#515 - error_reporting 예제
• Example#516 - restore_error_handler 예제
• Example#517 - restore_exception_handler 예제
• Example#518 - set_error_handler 및 trigger_error를 사용한 오류 처리
• Example#519 - set_exception_handler 예제
• Example#520 - trigger_error 예제
• Example#521 - 공유 라이브러리에서 함수 호출
• Example#522 - 함수 호출, 인수를 통해 구조 반환
• Example#523 - 기존 C 변수 액세스
• Example#524 - C 변수 생성 및 수정
• Example#525 - C 배열 작업
• Example#526 - C 열거형으로 작업하기
• Example#527 -
• Example#528 -
• Example#529 - Output Control 예제
• Example#530 - Output rewrite 예제
• Example#531 - ob_end_clean 예제
• Example#532 - ob_end_flush 예제
• Example#533 - 간단한 ob_get_clean 예제
• Example#534 - 간단한 ob_get_contents 예제
• Example#535 - ob_get_flush 예제
• Example#536 - 간단한 ob_get_length 예제
• Example#537 - ob_gzhandler 예제
• Example#538 - ob_list_handlers 예제
• Example#539 - 사용자 정의 콜백 함수 예제
• Example#540 - 지울 수 없는 출력 버퍼 만들기
• Example#541 - output_add_rewrite_var 예제
• Example#542 - output_reset_rewrite_vars 예제
• Example#543 - assert_options 예제
• Example#544 - 사용자 지정 핸들러로 실패한 어설션 처리
• Example#545 - 사용자 정의 핸들러를 사용하여 설명 인쇄
• Example#546 - 사용자 정의 예외가 없는 기대치
• Example#547 - 사용자 정의 예외에 대한 기대
• Example#548 - cli_get_process_title 예제
• Example#549 - cli_set_process_title 예제
• Example#550 - dl 예제
• Example#551 - extension_loaded 예제
• Example#552 - gc_enabled 예제
• Example#553 - gc_status 사용법
• Example#554 - get_current_user 예제
• Example#555 - get_defined_constants 예제
• Example#556 - XML 함수를 인쇄합니다.
• Example#557 - get_include_path 예제
• Example#558 - get_included_files 예제
• Example#559 - get_loaded_extensions 예제
• Example#560 - get_magic_quotes_runtime 예제
• Example#561 - 필터링되지 않은 get_resources
• Example#562 - 필터링된 get_resources
• Example#563 - getenv 예제
• Example#564 - getlastmod 예제
• Example#565 - getopt 예제: 기본 사항
• Example#566 - getopt 예제: 긴 옵션 소개
• Example#567 - getopt 예제: 여러 옵션을 하나로 전달
• Example#568 - getopt 예: rest_index 사용
• Example#569 - getrusage 예제
• Example#570 - ini_get_all 예제
• Example#571 - 세부정보 비활성화
• Example#572 - 몇 가지 ini_get 예제
• Example#573 - ini_restore 예제
• Example#574 - ini 옵션 설정
• Example#575 - memory_get_usage 예제
• Example#576 - memory_reset_peak_usage 예제
• Example#577 - php_ini_loaded_file 예제
• Example#578 - 반환된 ini 파일을 나열하는 간단한 예
• Example#579 - php_sapi_name 예제
• Example#580 - Some php_uname 예제
• Example#581 - 몇 가지 OS 관련 상수 예제
• Example#582 - 일반 크레딧을 인쇄합니다.
• Example#583 - 핵심 개발자 및 문서 그룹을 인쇄합니다.
• Example#584 - 모든 크레딧 인쇄
• Example#585 - phpinfo 예제
• Example#586 - phpversion 예제
• Example#587 - PHP_VERSION_ID 예제 및 사용법
• Example#588 - 환경 변수 설정
• Example#589 - restore_include_path 예제
• Example#590 - set_include_path 예제
• Example#591 - include 경로에 추가
• Example#592 - sys_get_temp_dir 예제
• Example#593 - version_compare 예제
• Example#594 - zend_thread_id 예제
• Example#595 - zend_version 예제
• Example#596 - php.ini의 runkit.superglobal=_FOO,_BAR이 있는 사용자 지정 슈퍼글로벌
• Example#597 - runkit7_function_add 예제
• Example#598 - runkit7_function_copy 예제
• Example#599 - runkit7_function_redefine 예제
• Example#600 - runkit7_method_add 예제
• Example#601 - runkit7_method_copy 예제
• Example#602 - runkit7_method_redefine 예제
• Example#603 - runkit7_method_remove 예제
• Example#604 - runkit7_method_rename 예제
• Example#605 - runkit7_zval_inspect 예제
• Example#606 - 기본 uopz_add_function 사용법
• Example#607 - uopz_allow_exit 예제
• Example#608 - uopz_backup 예제
• Example#609 - uopz_compose 예제
• Example#610 - uopz_copy 예제
• Example#611 - 기본 uopz_del_function 사용법
• Example#612 - uopz_delete 예제
• Example#613 - uopz_delete class 예제
• Example#614 - uopz_extend 예제
• Example#615 - uopz_flags 예제
• Example#616 - "Unfinalize" a Class
• Example#617 - uopz_function 예제
• Example#618 - uopz_function 클래스 예제
• Example#619 - uopz_get_exit_status 예제
• Example#620 - 기본 uopz_get_hook 사용법
• Example#621 - uopz_get_mock 예제
• Example#622 - 기본 uopz_get_property 사용법
• Example#623 - uopz_get_return 예제
• Example#624 - 기본 uopz_get_static 사용법
• Example#625 - uopz_implement 예제
• Example#626 - uopz_overload 예제
• Example#627 - uopz_redefine 예제
• Example#628 - uopz_rename 예제
• Example#629 - uopz_rename 클래스 예제
• Example#630 - uopz_restore 예제
• Example#631 - 기본 uopz_set_hook 사용법
• Example#632 - uopz_set_mock 예제
• Example#633 - uopz_set_mock 예제
• uopz_set_mock 및 정적 멤버
• Example#635 - 기본 uopz_set_property 사용법
• Example#636 - uopz_set_return 예제
• Example#637 - uopz_set_return 예제
• Example#638 - uopz_set_return 클래스 예제
• Example#639 - 기본 uopz_set_static 사용법
• Example#640 - uopz_undefine 예제
• Example#641 - 기본 uopz_unset_hook 사용법
• Example#642 - uopz_unset_mock 예제
• Example#643 - uopz_unset_return 예제
• Example#644 - wincache.ignorelist 예제
• Example#645 - wincache.php에 대한 인증 구성
• Example#646 - WinCache 세션 핸들러 활성화
• Example#647 - WinCache 기능 재라우팅 활성화
• Example#648 - Reroute.ini 파일 내용
• Example#649 - wincache_fcache_fileinfo 예제
• Example#650 - wincache_fcache_meminfo의 예
• Example#651 - wincache_lock 사용
• Example#652 - wincache_ocache_fileinfo 예제
• Example#653 - wincache_ocache_meminfo의 예
• Example#654 - wincache_refresh_if_changed 예
• Example#655 - wincache_rplist_fileinfo 예제
• Example#656 - wincache_rplist_meminfo의 예
• Example#657 - wincache_scache_info의 예
• Example#658 - wincache_scache_meminfo의 예
• Example#659 - 키를 문자열로 사용하여 wincache_ucache_add
• Example#660 - 키를 배열로 사용하여 wincache_ucache_add
• Example#661 - wincache_ucache_cas 사용
• Example#662 - wincache_ucache_clear 사용
• Example#663 - wincache_ucache_dec 사용
• Example#664 - 키를 문자열로 사용하여 wincache_ucache_delete 사용
• Example#665 - 키를 배열로 사용하여 wincache_ucache_delete 사용
• Example#666 - 일부 요소를 삭제할 수 없는 배열로 키와 함께 wincache_ucache_delete 사용
• Example#667 - wincache_ucache_exists 사용
• Example#668 - 키를 문자열로 포함하는 wincache_ucache_get
• Example#669 - 키를 배열로 사용하는 wincache_ucache_get
• Example#670 - wincache_ucache_inc 사용
• Example#671 - wincache_ucache_info 사용
• Example#672 - wincache_ucache_meminfo의 예
• Example#673 - 키를 문자열로 사용하는 wincache_ucache_set
• Example#674 - 키를 배열로 사용하는 wincache_ucache_set
• Example#675 - wincache_unlock 사용
• Example#676 - 선택적 GUI가 있는 Xhprof 예제
• Example#677 - xhprof_disable 예제
• Example#678 - xhprof_enable 예제
• Example#679 - xhprof_sample_disable 예제
• Example#680 - 목이 저장되어 있는지 확인
• Example#681 - CHAP 암호 사용
• Example#682 - radius_acct_open 예제
• Example#683 - radius_add_server 예제
• Example#684 - radius_auth_open 예제
• Example#685 - radius_create_request 예제
• Example#686 - radius_cvt_addr 예제
• Example#687 - radius_cvt_int 예제
• Example#688 - radius_cvt_string 예제
• Example#689 - radius_get_attr 예제
• Example#690 - radius_get_tagged_attr_data 예제
• Example#691 - radius_get_tagged_attr_tag 예제
• Example#692 - radius_get_vendor_attr 예제
• Example#693 - radius_put_attr 예제
• Example#694 - radius_put_int 예제
• Example#695 - radius_put_string 예제
• Example#696 - radius_put_vendor_attr 예제
• Example#697 - Readline 콜백 인터페이스 예제
• Example#698 - readline 예제
• Example#699 - Small bzip2 예제
• Example#700 - 데이터 압축
• Example#701 - 문자열 압축 풀기
• Example#702 - bzerror 예제
• Example#703 - bzopen 예제
• Example#704 - bzread 예제
• Example#705 - bzwrite 예제
• Example#706 - 외부 파일 사용
• Example#707 - phar 아카이브 내에서 파일 사용
• Example#708 - phar 아카이브를 phar에서 tar 파일 형식으로 변환
• Example#709 - phar.cache_list usage 예제
• Example#710 - Phar::addEmptyDir 예제
• Example#711 - Phar::addFile 예제
• Example#712 - Phar::addFromString 예제
• Example#713 - Phar::apiVersion 예제
• Example#714 - Phar::buildFromDirectory 예제
• Example#715 - SplFileInfo가 있는 Phar::buildFromIterator
• Example#716 - 다른 반복자가 있는 Phar::buildFromIterator
• Example#717 - Phar::canCompress 예제
• Example#718 - Phar::canWrite 예제
• Example#719 - Phar::compress 예제
• Example#720 - Phar::compressFiles 예제
• Example#721 - Phar::__construct 예제
• Example#722 - Phar::convertToData 예제
• Example#723 - Phar::convertToExecutable 예제
• Example#724 - Phar::copy 예제
• Example#725 - Phar::count 예제
• Example#726 - Phar::createDefaultStub 예제
• Example#727 - Phar::decompress 예제
• Example#728 - Phar::decompressFiles 예제
• Example#729 - Phar::delMetaData 예제
• Example#730 - Phar::delete 예제
• Example#731 - Phar::extractTo 예제
• Example#732 - Phar::getMetadata 예제
• Example#733 - Phar::getStub 예제
• Example#734 - Phar::hasMetadata 예제
• Example#735 - Phar::interceptFileFuncs 예제
• Example#736 - Phar::interceptFileFuncs 예제
• Example#737 - Phar::isBuffering 예제
• Example#738 - Phar::isCompressed 예제
• Example#739 - Phar::loadPhar 예제
• Example#740 - Phar::mapPhar 예제
• Example#741 - Phar::mount 예제
• Example#742 - Phar::mungServer 예제
• Example#743 - Phar::offsetExists 예제
• Example#744 - Phar::offsetGet 예제
• Example#745 - Phar::offsetSet 예제
• Example#746 - Phar::offsetUnset 예제
• Example#747 - Phar::running 예제
• Example#748 - Phar::setAlias 예제
• Example#749 - Phar::setDefaultStub 예제
• Example#750 - Phar::setMetadata 예제
• Example#751 - Phar::setStub 예제
• Example#752 - Phar::startBuffering 예제
• Example#753 - Phar::stopBuffering 예제
• Example#754 - Phar::unlinkArchive 예제
• Example#755 - Phar::webPhar 예제
• Example#756 - PharData::addEmptyDir 예제
• Example#757 - PharData::addFile 예제
• Example#758 - PharData::addFromString 예제
• Example#759 - PharData::buildFromDirectory 예제
• Example#760 - SplFileInfo가 있는 PharData::buildFromIterator
• Example#761 - 다른 반복자가 있는 PharData::buildFromIterator
• Example#762 - PharData::compress 예제
• Example#763 - PharData::compressFiles 예제
• Example#764 - PharData::__construct 예제
• Example#765 - PharData::convertToData 예제
• Example#766 - PharData::convertToExecutable 예제
• Example#767 - PharData::copy 예제
• Example#768 - PharData::decompress 예제
• Example#769 - PharData::decompressFiles 예제
• Example#770 - PharData::delMetaData 예제
• Example#771 - PharData::delete 예제
• Example#772 - PharData::extractTo 예제
• Example#773 - PharData::offsetSet 예제
• Example#774 - PharData::offsetUnset 예제
• Example#775 - Phar::setMetadata 예제
• Example#776 - PharFileInfo::chmod 예제
• Example#777 - PharFileInfo::compress 예제
• Example#778 - PharFileInfo::__construct 예제
• Example#779 - PharFileInfo::decompress 예제
• Example#780 - PharFileInfo::delMetaData 예제
• Example#781 - PharFileInfo::getCRC32 예제
• Example#782 - PharFileInfo::getCompressedSize 예제
• Example#783 - PharFileInfo::getMetadata 예제
• Example#784 - PharFileInfo::getPharFlags 예제
• Example#785 - PharFileInfo::isCRCChecked 예제
• Example#786 - PharFileInfo::isCompressed 예제
• Example#787 - PharFileInfo::setMetadata 예제
• Example#788 - RAR 설치
• Example#789 - On-the-fly decompression
• Example#790 - RAR 확장 파일 시스템 추출 예
• Example#791 - 객체 지향 스타일
• Example#792 - 절차적 스타일
• Example#793 - 객체 지향 스타일
• Example#794 - 절차적 스타일
• Example#795 - 객체 지향 스타일
• Example#796 - 절차적 스타일
• Example#797 - 객체 지향 스타일
• Example#798 - 절차적 스타일
• Example#799 - 객체 지향 스타일
• Example#800 - 절차적 스타일
• Example#801 - 객체 지향 스타일
• Example#802 - 절차적 스타일
• Example#803 - 객체 지향 스타일
• Example#804 - 절차적 스타일
• Example#805 - 륨 콜백
• Example#806 - 객체 지향 스타일
• Example#807 - 절차적 스타일
• Example#808 - RarArchive::__toString 예제
• Example#809 - RarEntry::extract 예제
• Example#810 - 아카이브의 모든 파일을 추출하는 방법:
• Example#811 - RarEntry::getAttr 예제
• Example#812 - RarEntry::getHostOs 예제(버전 >= 2.0.0)
• Example#813 - RarEntry::getHostOs 예제(버전 <= 1.0.0)
• Example#814 - RarEntry::getMethod 예제
• Example#815 - RarEntry::getName 예제
• Example#816 - RarEntry::getPackedSize 예제
• Example#817 - RarEntry::getStream 예제
• Example#818 - RarEntry::getUnpackedSize 예제
• Example#819 - RarEntry::getVersion 예제
• Example#820 - RarException::isUsingExceptions 예제
• Example#821 - RarException::setUsingExceptions 예제
• Example#822 - Zip 아카이브 만들기
• Example#823 - 아카이브 세부 정보 및 목록 덤프
• Example#824 - Zip 스트림 래퍼, OpenOffice 메타 정보 읽기
• Example#825 - Zip 사용 예
• Example#826 - 아카이브에 새 디렉토리 생성
• Example#827 - 열고 추가
• Example#828 - 새 아카이브에 항목 추가
• Example#829 - 아카이브 내부의 디렉토리에 파일 추가
• Example#830 - ZipArchive::addGlob 예제
• Example#831 - ZipArchive::addPattern 예제
• Example#832 - 색인을 사용하여 아카이브에서 파일 삭제
• Example#833 - 이름을 사용하여 아카이브에서 파일 및 디렉토리 삭제
• Example#834 - 모든 항목 추출
• Example#835 - 두 항목 추출
• Example#836 - 아카이브 댓글 덤프
• Example#837 - 항목 주석 덤프
• Example#838 - 항목 주석 덤프
• Example#839 - Unix 권한이 있는 모든 항목 추출
• Example#840 - 파일 내용 가져오기
• Example#841 - 파일 내용 가져오기
• Example#842 - zip 항목에서 이미지 변환
• Example#843 - ZipArchive::getNameIndex 예제
• Example#844 - fread로 항목 내용을 가져와서 저장하십시오.
• Example#845 - 이전 예제와 동일하지만 fopen 및 zip 스트림 래퍼 사용
• Example#846 - 스트림 래퍼 및 이미지, xml 기능과 함께 사용할 수도 있습니다.
• Example#847 - fread로 항목 내용을 가져와서 저장하십시오.
• Example#848 - fread로 항목 내용을 가져와서 저장하십시오.
• Example#849 - 아카이브를 만든 다음 ZipArchive::locateName과 함께 사용하십시오.
• Example#850 - 열고 추출
• Example#851 - 아카이브 만들기
• Example#852 - 임시 아카이브 만들기
• Example#853 - 파일 아카이브
• Example#854 - 파일 아카이브
• Example#855 - 하나의 항목 이름 바꾸기
• Example#856 - 하나의 항목 이름 바꾸기
• Example#857 - 열고 교체
• Example#858 - 아카이브 생성 및 댓글 설정
• Example#859 - 아카이브를 열고 항목에 대한 설명 설정
• Example#860 - 아카이브를 열고 항목에 대한 설명 설정
• Example#861 - 아카이브에 다른 압축 메서드로 파일 추가
• Example#862 - 아카이브에 다른 압축 메서드로 파일 추가
• Example#863 - 파일 추가 및 압축 방식 설정
• Example#864 - 파일 보관 및 암호화
• Example#865 - Unix 권한으로 파일 보관
• Example#866 - 파일 아카이브
• Example#867 - 파일 아카이브
• Example#868 - 항목의 통계 정보 덤프
• Example#869 - 항목의 통계 정보 덤프
• Example#870 - 은 Zlib 예제
• Example#871 - 증분 압축 및 압축 해제 API 작업
• Example#872 - gzclose 예
• Example#873 - gzcompress 예
• Example#874 - gzdeflate 예
• Example#875 - gzip 파일 만들기
• Example#876 - gzeof 예
• Example#877 - gzfile 예
• Example#878 - gzgetc 예
• Example#879 - gzgets 예
• Example#880 - gzgetss 예
• Example#881 - gzinflate 예
• Example#882 - gzopen 예
• Example#883 - gzpassthru 예
• Example#884 - gzread 예
• Example#885 - gzseek 예
• Example#886 - gzuncompress 예
• Example#887 - gzwrite 예
• Example#888 - zlib_encode 예
• Example#889 - random_bytes 예
• Example#890 - random_int 예
• Example#891 - hash_algos 예
• Example#892 - hash_copy 예
• Example#893 - hash_equals 예
• Example#894 - hash_file 사용
• Example#895 - hash_final 예
• Example#896 - hash_hkdf 예
• Example#897 - hash_hmac_algos 예
• Example#898 - hash_hmac_file 예
• Example#899 - hash_hmac 예
• Example#900 - Incremental hashing 예
• Example#901 - hash_pbkdf2 예, 기본 사용법
• Example#902 - hash_update_stream 예
• Example#903 - hash 예
• Example#904 - mcrypt_create_iv 예
• Example#905 - mcrypt_enc_get_algorithms_name 예
• Example#906 - mcrypt_enc_get_modes_name 예
• Example#907 - mcrypt_enc_get_supported_key_sizes 예
• Example#908 - mcrypt_encrypt 예
• Example#909 - mcrypt_get_block_size 예
• Example#910 - mcrypt_get_cipher_name 예
• Example#911 - mcrypt_get_iv_size 예
• Example#912 - mcrypt_get_key_size 예
• Example#913 - mcrypt_list_algorithms 예
• Example#914 - mcrypt_list_modes 예
• Example#915 - mcrypt_module_open 예
• Example#916 - 암호화에서 mcrypt_module_open 사용
• Example#917 - mcrypt_module_self_test 예
• Example#918 - mdecrypt_generic 예
• Example#919 - MD5 다이제스트와 hmac을 계산하고 16진수로 출력합니다.
• Example#920 - 모든 해시 순회
• Example#921 - mhash_get_block_size 예
• Example#922 - mhash_get_hash_name 예
• Example#923 - openssl_cipher_iv_length 예
• Example#924 - openssl_cipher_key_length 예
• Example#925 - openssl_cms_sign 예
• Example#926 - openssl_csr_export_to_file() 예
• Example#927 - openssl_csr_export() 예
• Example#928 - openssl_csr_get_public_key() 예
• Example#929 - openssl_csr_get_subject() 예
• Example#930 - 자체 서명된 인증서 만들기
• Example#931 - 자체 서명된 ECC 인증서 만들기(PHP 7.1.0부터)
• Example#932 - openssl_csr_sign 예제 - CSR 서명(자신의 CA 구현 방법)
• Example#933 - 공유 비밀 계산
• Example#934 - PHP에서 DH 공개/개인 키 쌍 생성
• Example#935 - PHP 7.1+용 GCM 모드의 AES 인증 암호화 예
• Example#936 - PHP 7.1 이전의 AES 인증 암호화 예
• Example#937 - openssl_error_string 예제
• Example#938 - openssl_get_cert_locations 예제
• Example#939 - openssl_get_cipher_methods 예제
• Example#940 - openssl_get_curve_names 예제
• Example#941 - openssl_get_md_methods 예제
• Example#942 - openssl_open 예제
• Example#943 - openssl_pbkdf2() 예제
• Example#944 - openssl_pkcs12_read 예제
• Example#945 - openssl_pkcs7_decrypt 예제
• Example#946 - openssl_pkcs7_encrypt 예제
• Example#947 - P7B 파일에서 PEM 어레이 가져오기
• Example#948 - openssl_pkcs7_sign 예제
• Example#949 - openssl_pkey_derive 예제
• Example#950 - 개인 키에서 공개 키 얻기
• Example#951 - openssl_random_pseudo_bytes 예
• Example#952 - openssl_seal 예
• Example#953 - openssl_sign 예
• Example#954 - openssl_sign 예
• Example#955 - openssl_spki_export_challenge 예
• Example#956 - openssl_spki_export_challenge example from <keygen>
• Example#957 - openssl_spki_export 예
• Example#958 - openssl_spki_export example from <keygen>
• Example#959 - openssl_spki_new 예
• Example#960 - openssl_spki_verify 예
• Example#961 - openssl_spki_verify example from <keygen>
• Example#962 - openssl_verify 예
• Example#963 - openssl_verify 예
• Example#964 - openssl_x509_verify 예
• Example#965 - 기본 비밀번호 사용
• Example#966 - password_hash 예
• Example#967 - password_hash 예제 수동 설정 비용
• Example#968 - 좋은 비용을 찾는 password_hash 예제
• Example#969 - Argon2i를 사용한 password_hash 예제
• Example#970 - password_needs_rehash 사용
• Example#971 - password_verify 예제
• Example#972 - sodium_crypto_box_seal_open 예제
• Example#973 - sodium_crypto_box_seal 예제
• Example#974 - sodium_crypto_core_ristretto255_add 예제
• Example#975 - sodium_crypto_core_ristretto255_from_hash 예제
• Example#976 - sodium_crypto_core_ristretto255_is_valid_point 예제
• Example#977 - sodium_crypto_core_ristretto255_random 예제
• Example#978 - sodium_crypto_core_ristretto255_scalar_add 예제
• Example#979 - sodium_crypto_core_ristretto255_scalar_invert 예제
• Example#980 - sodium_crypto_core_ristretto255_scalar_negate 예제
• Example#981 - sodium_crypto_core_ristretto255_scalar_random 예제
• Example#982 - sodium_crypto_core_ristretto255_scalar_sub 예제
• Example#983 - sodium_crypto_core_ristretto255_sub 예제
• Example#984 - sodium_crypto_generichash_final 예제
• Example#985 - sodium_crypto_generichash_init 예제
• Example#986 - sodium_crypto_generichash_update 예제
• Example#987 - sodium_crypto_kx_keypair 사용
• Example#988 - sodium_crypto_pwhash_str 예제
• Example#989 - sodium_crypto_pwhash 예제
• Example#990 - sodium_crypto_secretbox_keygen 예제
• Example#991 - sodium_crypto_secretbox_keygen과 random_bytes 비교
• Example#992 - sodium_crypto_secretbox_open 예제
• Example#993 - sodium_crypto_secretbox 예제
• Example#994 - sodium_crypto_secretstream_xchacha20poly1305_init_pull 예제
• Example#995 - sodium_crypto_secretstream_xchacha20poly1305_init_push 예제
• Example#996 - sodium_crypto_stream_xchacha20_xor_ic 예제
• Example#997 - DBA 예제
• Example#998 - 데이터베이스 순회
• Example#999 - dba_handlers 예제
• Example#1000 - 열에 대한 권한 목록
• Example#1001 - 테이블의 열 목록
• Example#1002 - DSN-less connections
• Example#1003 - 사용 가능한 DSN 목록
• Example#1004 - odbc_execute and odbc_prepare 예제
• Example#1005 - odbc_fetch_into 예제
• Example#1006 - odbc_next_result
• Example#1007 - odbc_execute and odbc_prepare 예제
• Example#1008 - 열의 기본 키 목록
• Example#1009 - 저장 프로시저의 열 목록
• Example#1010 - 데이터베이스의 저장 프로시저 목록
• Example#1011 - odbc_result 예제
• Example#1012 - odbc_setoption 예제
• Example#1013 - 테이블의 통계 목록
• Example#1014 - 테이블의 권한 목록
• Example#1015 - 카탈로그의 테이블 목록
• Example#1016 - PDO::ATTR_DRIVER_NAME 사용
• Example#1017 - MySQL에 연결
• Example#1018 - 연결 오류 처리
• Example#1019 - 연결 닫기
• Example#1020 - 영구 연결
• Example#1021 - 트랜잭션에서 배치 실행
• Example#1022 - 준비된 명령문을 사용하여 반복 삽입
• Example#1023 - 준비된 명령문을 사용하여 반복 삽입
• Example#1024 - 준비된 문을 사용하여 데이터 가져오기
• Example#1025 - 출력 매개변수를 사용하여 저장 프로시저 호출
• Example#1026 - 입력/출력 매개변수를 사용하여 저장 프로시저 호출
• Example#1027 - 잘못된 자리 표시자 사용
• Example#1028 - PDO 인스턴스 생성 및 오류 모드 설정
• Example#1029 - PDO 인스턴스 생성 및 생성자에서 오류 모드 설정
• Example#1030 - 데이터베이스에서 이미지 표시
• Example#1031 - 데이터베이스에 이미지 삽입
• Example#1032 - 데이터베이스에 이미지 삽입: Oracle
• Example#1033 - 트랜잭션 롤백
• Example#1034 - Committing a basic transaction
• Example#1035 - Committing a DDL transaction
• Example#1036 - Create a PDO instance via driver invocation
• Example#1037 - Create a PDO instance via URI invocation
• Example#1038 - Create a PDO instance using an alias
• Example#1039 - Retrieving an SQLSTATE code
• Example#1040 - Displaying errorInfo() fields for a PDO_ODBC connection to a DB2 database
• Example#1041 - Issuing a DELETE statement
• Example#1042 - Retrieving database connection attributes
• Example#1043 - A PDO::getAvailableDrivers example
• Example#1044 - SQL statement template with named parameters
• Example#1045 - SQL statement template with question mark parameters
• Example#1046 - SQL statement template with question mark escaped
• Example#1047 - SQL with no placeholders can be executed using PDO::query
• Example#1048 - Quoting a normal string
• Example#1049 - Quoting a dangerous string
• Example#1050 - Quoting a complex string
• Example#1051 - Roll back a transaction
• Example#1052 - Binding result set output to PHP variables
• Example#1053 - Execute a prepared statement with named placeholders
• Example#1054 - Execute a prepared statement with question mark placeholders
• Example#1055 - Call a stored procedure with an INOUT parameter
• Example#1056 - Execute a prepared statement with named placeholders
• Example#1057 - Execute a prepared statement with question mark placeholders
• Example#1058 - A PDOStatement::closeCursor example
• Example#1059 - Counting columns
• Example#1060 - PDOStatement::debugDumpParams example with named parameters
• Example#1061 - PDOStatement::debugDumpParams example with unnamed parameters
• Example#1062 - Retrieving an SQLSTATE code
• Example#1063 - Displaying errorInfo() fields for a PDO_ODBC connection to a DB2 database
• Example#1064 - Execute a prepared statement with a bound variable and value
• Example#1065 - Execute a prepared statement with an array of named values
• Example#1066 - Execute a prepared statement with an array of positional values
• Example#1067 - Execute a prepared statement with variables bound to positional placeholders
• Example#1068 - Execute a prepared statement using array for IN clause
• Example#1069 - Fetching rows using different fetch styles
• Example#1070 - Fetching rows with a scrollable cursor
• Example#1071 - Construction order
• Example#1072 - Fetch all remaining rows in a result set
• Example#1073 - Fetching all values of a single column from a result set
• Example#1074 - Grouping all values by a single column
• Example#1075 - Instantiating a class for each result
• Example#1076 - Calling a function for each result
• Example#1077 - Return first column of the next row
• Example#1078 - Retrieving column metadata
• Example#1079 - Fetching multiple rowsets returned from a stored procedure
• Example#1080 - Return the number of deleted rows
• Example#1081 - Counting rows returned by a SELECT statement
• Example#1082 - Setting the fetch mode
• Example#1083 - Insert LOBs in CUBRID PDO
• Example#1084 - Fetch LOBs in CUBRID PDO
• Example#1085 - Insert set in CUBRID PDO with default data type.
• Example#1086 - Specify data type when insert set in CUBRID PDO
• Example#1087 - PDO_CUBRID DSN examples
• Example#1088 - A PDO::cubrid_schema example
• Example#1089 - PDO_DBLIB DSN examples
• Example#1090 - PDO_FIREBIRD DSN example with path
• Example#1091 - PDO_FIREBIRD DSN example with port and path
• Example#1092 - PDO_FIREBIRD DSN example with localhost and path to employee.fdb on Debian system
• Example#1093 - PDO_FIREBIRD DSN to connect to a dialect 1 database
• Example#1094 - PDO_IBM DSN example using db2cli.ini
• Example#1095 - PDO_IBM DSN example using a connection string
• Example#1096 - PDO_INFORMIX DSN example using odbc.ini
• Example#1097 - PDO_INFORMIX DSN example using a connection string
• Example#1098 - Forcing queries to be buffered in mysql
• Example#1099 - PDO_MYSQL DSN examples
• Example#1100 - PDO_SQLSRV DSN examples
• Example#1101 - PDO_OCI DSN examples
• Example#1102 - PDO_ODBC DSN example (ODBC driver manager)
• Example#1103 - PDO_ODBC DSN example (IBM DB2 uncataloged connection)
• Example#1104 - PDO_ODBC DSN example (Microsoft Access uncataloged connection)
• Example#1105 - PDO_PGSQL DSN examples
• Example#1106 - A PDO::pgsqlLOBCreate example
• Example#1107 - A PDO::pgsqlLOBOpen example
• Example#1108 - A PDO::pgsqlLOBUnlink example
• Example#1109 - PDO_SQLITE DSN examples
• Example#1110 - max_length aggregation function example
• Example#1111 - PDO::sqliteCreateCollation example
• Example#1112 - PDO::sqliteCreateFunction example
• Example#1113 - Example of Data Retrieval
• Example#1114 - Example of Data Insertion
• Example#1115 - cubrid_bind example
• Example#1116 - cubrid_bind BLOB/CLOB example
• Example#1117 - cubrid_bind BLOB/CLOB example
• Example#1118 - cubrid_close_prepare example
• Example#1119 - cubrid_close_request example
• Example#1120 - cubrid_col_get example
• Example#1121 - cubrid_col_size example
• Example#1122 - cubrid_column_names example
• Example#1123 - cubrid_column_types example
• Example#1124 - cubrid_commit example
• Example#1125 - cubrid_connect_with_url url without properties example
• Example#1126 - cubrid_connect_with_url url with properties example
• Example#1127 - cubrid_connect example
• Example#1128 - cubrid_current_oid example
• Example#1129 - cubrid_disconnect example
• Example#1130 - cubrid_drop example
• Example#1131 - cubrid_error_code_facility example
• Example#1132 - cubrid_error_code example
• Example#1133 - cubrid_error_msg example
• Example#1134 - cubrid_execute example
• Example#1135 - cubrid_fetch example
• Example#1136 - cubrid_free_result example
• Example#1137 - cubrid_get_charset example
• Example#1138 - cubrid_get_class_name example
• Example#1139 - cubrid_get_client_info example
• Example#1140 - cubrid_get_db_parameter example
• Example#1141 - cubrid_get_query_timeout example
• Example#1142 - cubrid_get_server_info example
• Example#1143 - cubrid_get example
• Example#1144 - cubrid_insert_id example
• Example#1145 - cubrid_is_instance example
• Example#1146 - cubrid_lob_close example
• Example#1147 - cubrid_lob_export example
• Example#1148 - cubrid_lob_get example
• Example#1149 - cubrid_lob_send example
• Example#1150 - cubrid_lob_size example
• Example#1151 - cubrid_lob2_bind example
• Example#1152 - cubrid_lob2_export example
• Example#1153 - cubrid_lob2_export example
• Example#1154 - cubrid_lob2_read example 1
• Example#1155 - cubrid_lob2_read example 2
• Example#1156 - cubrid_lob2_seek64 example
• Example#1157 - cubrid_lob2_seek example
• Example#1158 - cubrid_lob2_write example 1
• Example#1159 - cubrid_lob2_write example 2
• Example#1160 - cubrid_lock_read example
• Example#1161 - cubrid_lock_write example
• Example#1162 - cubrid_move_cursor example
• Example#1163 - cubrid_next_result example
• Example#1164 - cubrid_num_cols example
• Example#1165 - cubrid_num_rows example
• Example#1166 - cubrid_pconnect_with_url url without properties example
• Example#1167 - cubrid_pconnect_with_url url with properties example
• Example#1168 - cubrid_connect example
• Example#1169 - cubrid_prepare example
• Example#1170 - cubrid_put example
• Example#1171 - cubrid_rollback example
• Example#1172 - cubrid_schema example
• Example#1173 - cubrid_seq_drop example
• Example#1174 - cubrid_seq_insert example
• Example#1175 - cubrid_seq_put example
• Example#1176 - cubrid_set_add example
• Example#1177 - cubrid_get_db_parameter example
• Example#1178 - cubrid_set_drop example
• Example#1179 - cubrid_version example
• Example#1180 - cubrid_affected_rows example
• Example#1181 - cubrid_client_encoding example
• Example#1182 - cubrid_close example
• Example#1183 - cubrid_data_seek example
• Example#1184 - cubrid_db_name example
• Example#1185 - cubrid_errno example
• Example#1186 - cubrid_error example
• Example#1187 - cubrid_fetch_array example
• Example#1188 - cubrid_fetch_assoc example
• Example#1189 - cubrid_fetch_field example
• Example#1190 - cubrid_fetch_lengths example
• Example#1191 - cubrid_fetch_object example
• Example#1192 - cubrid_fetch_row example
• Example#1193 - cubrid_field_flags example
• Example#1194 - cubrid_field_len example
• Example#1195 - cubrid_field_name example
• Example#1196 - cubrid_field_seek example
• Example#1197 - cubrid_field_table example
• Example#1198 - cubrid_field_type example
• Example#1199 - cubrid_list_dbs example
• Example#1200 - cubrid_num_fields example
• Example#1201 - cubrid_ping example
• Example#1202 - Invalid Query
• Example#1203 - Valid Query
• Example#1204 - cubrid_real_escape_string example
• Example#1205 - cubrid_result example
• Example#1206 - cubrid_unbuffered_query example
• Example#1207 - cubrid_load_from_glo example
• Example#1208 - cubrid_new_glo example
• Example#1209 - cubrid_save_to_glo example
• Example#1210 - cubrid_send_glo example
• Example#1211 - Inserting a record in a dBase database
• Example#1212 - Closing a dBase database file
• Example#1213 - Creating a dBase database file
• Example#1214 - Showing header information for a dBase database file
• Example#1215 - Listing all the registered members in the database
• Example#1216 - dbase_numfields Example
• Example#1217 - Looping over all the records of the database
• Example#1218 - Opening a dBase database file
• Example#1219 - Emptying a dBase database
• Example#1220 - Updating a record in the database
• Example#1221 - ibase_backup example
• Example#1222 - ibase_backup example with arguments
• Example#1223 - ibase_blob_get example
• Example#1224 - ibase_blob_import example
• Example#1225 - ibase_connect example
• Example#1226 - ibase_execute example
• Example#1227 - ibase_fetch_object example
• Example#1228 - ibase_field_info example
• Example#1229 - ibase_name_result example
• Example#1230 - ibase_num_fields example
• Example#1231 - ibase_query example
• Example#1232 - ibase_restore example
• Example#1233 - ibase_restore example with arguments
• Example#1234 - ibase_service_attach example
• Example#1235 - ibase_service_attach example
• Example#1236 - ibase_service_attach example using hostname/port syntax
• Example#1237 - ibase_service_detach example
• Example#1238 - ibase_set_event_handler example
• Example#1239 - Retrieving the AUTOCOMMIT value for a connection
• Example#1240 - Setting the AUTOCOMMIT value for a connection
• Example#1241 - Binding PHP variables to a prepared statement
• Example#1242 - Calling stored procedures with IN and OUT parameters
• Example#1243 - Inserting a binary large object (BLOB) directly from a file
• Example#1244 - A db2_client_info example
• Example#1245 - Closing a connection
• Example#1246 - Retrieving an SQLSTATE value for a failed connection attempt
• Example#1247 - Retrieving the error message returned by a failed connection attempt
• Example#1248 - Creating a cataloged connection
• Example#1249 - Creating an uncataloged connection
• Example#1250 - Creating a connection with autocommit off by default
• Example#1251 - i5/OS best performance
• Example#1252 - Using trusted context
• Example#1253 - A db2_escape_string example
• Example#1254 - Creating a table with db2_exec
• Example#1255 - Executing a SELECT statement with a scrollable cursor
• Example#1256 - Returning XML data as an SQL ResultSet
• Example#1257 - Performing a "JOIN" with XML data
• Example#1258 - Returning SQL data as part of a larger XML document
• Example#1259 - Preparing and executing an SQL statement with parameter markers
• Example#1260 - Calling a stored procedure with an OUT parameter
• Example#1261 - Returning XML data as an SQL ResultSet
• Example#1262 - Performing a "JOIN" with XML data
• Example#1263 - Returning SQL data as part of a larger XML document
• Example#1264 - Iterating through a forward-only cursor
• Example#1265 - Retrieving specific rows with db2_fetch_array from a scrollable cursor
• Example#1266 - Iterating through a forward-only cursor
• Example#1267 - Retrieving specific rows with db2_fetch_assoc from a scrollable cursor
• Example#1268 - Iterating through a forward-only cursor
• Example#1269 - Retrieving specific rows with db2_fetch_both from a scrollable cursor
• Example#1270 - A db2_fetch_object example
• Example#1271 - Iterating through a result set
• Example#1272 - i5/OS recommended alternatives to db2_fetch_row/db2_result
• Example#1273 - Setting and retrieving parameters through a connection resource
• Example#1274 - A db2_last_insert_id example
• Example#1275 - Iterating through different types of data
• Example#1276 - Calling a stored procedure that returns multiple result sets
• Example#1277 - Retrieving the number of fields in a result set
• Example#1278 - Closing a persistent connection
• Example#1279 - A db2_pconnect example
• Example#1280 - Using trusted context
• Example#1281 - Preparing and executing an SQL statement with parameter markers
• Example#1282 - A db2_result example
• Example#1283 - Rolling back a DELETE statement
• Example#1284 - A db2_server_info example
• Example#1285 - Setting one parameter with a connection resource
• Example#1286 - Setting multiple parameters with a connection resource
• Example#1287 - Setting multiple parameters with an invalid key
• Example#1288 - Setting multiple parameters with an invalid value
• Example#1289 - Setting multiple parameters with a connection resource and the wrong type
• Example#1290 - Setting multiple parameters with the wrong resource
• Example#1291 - Putting it all together
• Example#1292 - i5/OS cursors are read-only
• Example#1293 - MongoDB\Driver\Manager::__construct basic example
• Example#1294 - MongoDB\Driver\Manager::__construct basic examples
• Example#1295 - MongoDB\Driver\Manager::executeBulkWrite example
• Example#1296 - MongoDB\Driver\Manager::executeCommand with a command returning a single result document
• Example#1297 - MongoDB\Driver\Manager::executeCommand with a command returning a cursor
• Example#1298 - Limiting execution time for a command
• Example#1299 - MongoDB\Driver\Manager::executeQuery example
• Example#1300 - Limiting execution time for a query
• Example#1301 - MongoDB\Driver\Manager::getReadConcern example
• Example#1302 - MongoDB\Driver\Manager::getReadPreference example
• Example#1303 - MongoDB\Driver\Manager::getServers example
• Example#1304 - MongoDB\Driver\Manager::getWriteConcern example
• Example#1305 - Composing MongoDB\Driver\Command to provide a helper to create collections
• Example#1306 - MongoDB\Driver\Command::__construct example
• Example#1307 - MongoDB\Driver\Command::__construct example
• Example#1308 - MongoDB\Driver\Query::__construct example
• Example#1309 - Mixed write operations are grouped by type
• Example#1310 - Ordered write operations causing an error
• Example#1311 - MongoDB\Driver\BulkWrite::__construct example
• Example#1312 - MongoDB\Driver\BulkWrite::count example
• Example#1313 - MongoDB\Driver\BulkWrite::delete example
• Example#1314 - MongoDB\Driver\BulkWrite::insert example
• Example#1315 - MongoDB\Driver\BulkWrite::update example
• Example#1316 - Declare an API version on a manager
• Example#1317 - Declare a strict API version on a manager
• Example#1318 - MongoDB\Driver\WriteConcern::bsonSerialize with majority write concern
• Example#1319 - MongoDB\Driver\WriteConcern::bsonSerialize with wtimeout and journal
• Example#1320 - MongoDB\Driver\WriteConcern::__construct example
• Example#1321 - MongoDB\Driver\WriteConcern::getJournal example
• Example#1322 - MongoDB\Driver\WriteConcern::getW example
• Example#1323 - MongoDB\Driver\WriteConcern::getWtimeout example
• Example#1324 - MongoDB\Driver\WriteConcern::isDefault example
• Example#1325 - MongoDB\Driver\ReadPreference::bsonSerialize with primary read preference
• Example#1326 - MongoDB\Driver\ReadPreference::bsonSerialize with secondary read preference and tag sets
• Example#1327 - MongoDB\Driver\ReadPreference::bsonSerialize with secondary read preference and max staleness
• Example#1328 - MongoDB\Driver\ReadPreference::__construct example
• Example#1329 - MongoDB\Driver\ReadPreference::getMaxStalenessSeconds example
• Example#1330 - MongoDB\Driver\ReadPreference::getMode example
• Example#1331 - MongoDB\Driver\ReadPreference::getModeString example
• Example#1332 - MongoDB\Driver\ReadPreference::getTagSets example
• Example#1333 - MongoDB\Driver\ReadConcern::bsonSerialize with empty read concern
• Example#1334 - MongoDB\Driver\ReadConcern::bsonSerialize with local read concern
• Example#1335 - MongoDB\Driver\ReadConcern::__construct example
• Example#1336 - MongoDB\Driver\ReadConcern::getLevel example
• Example#1337 - MongoDB\Driver\ReadConcern::isDefault example
• Example#1338 - Reading a result set
• Example#1339 - Reading a result set for a tailable cursor
• Example#1340 - MongoDB\Driver\Cursor::getId example
• Example#1341 - MongoDB\Driver\Cursor::getServer example
• Example#1342 - MongoDB\Driver\Cursor::isDead example
• Example#1343 - MongoDB\Driver\Cursor::setTypeMap example
• Example#1344 - MongoDB\Driver\Cursor::toArray example
• Example#1345 - MongoDB\Driver\CursorId::__toString example
• Example#1346 - MongoDB\Driver\Server::getHost example
• Example#1347 - MongoDB\Driver\Server::getInfo example
• Example#1348 - MongoDB\Driver\Server::getLatency example
• Example#1349 - MongoDB\Driver\Server::getPort example
• Example#1350 - MongoDB\Driver\WriteConcernError::getCode example
• Example#1351 - MongoDB\Driver\WriteConcernError::getInfo example
• Example#1352 - MongoDB\Driver\WriteConcernError::getMessage example
• Example#1353 - MongoDB\Driver\WriteError::getCode example
• Example#1354 - MongoDB\Driver\WriteError::getIndex example
• Example#1355 - MongoDB\Driver\WriteError::getMessage example
• Example#1356 - MongoDB\Driver\WriteResult::getDeletedCount example
• Example#1357 - MongoDB\Driver\WriteResult::getInsertedCount example
• Example#1358 - MongoDB\Driver\WriteResult::getMatchedCount example
• Example#1359 - MongoDB\Driver\WriteResult::getModifiedCount example
• Example#1360 - MongoDB\Driver\WriteResult::getServer example
• Example#1361 - MongoDB\Driver\WriteResult::getUpsertedCount example
• Example#1362 - MongoDB\Driver\WriteResult::getUpsertedIds example
• Example#1363 - MongoDB\Driver\WriteResult::getWriteConcernError example
• Example#1364 - MongoDB\Driver\WriteResult::getWriteErrors with a single error
• Example#1365 - MongoDB\Driver\WriteResult::getWriteErrors with multiple errors
• Example#1366 - MongoDB\Driver\WriteResult::isAcknowledged with acknowledged write concern
• Example#1367 - MongoDB\Driver\WriteResult::isAcknowledged with unacknowledged write concern
• Example#1368 - MongoDB\BSON\fromJSON example
• Example#1369 - MongoDB\BSON\fromPHP example
• Example#1370 - MongoDB\BSON\toCanonicalExtendedJSON example
• Example#1371 - MongoDB\BSON\toJSON example
• Example#1372 - MongoDB\BSON\toPHP example
• Example#1373 - MongoDB\BSON\toRelaxedExtendedJSON example
• Example#1374 - MongoDB\BSON\Binary::__construct example
• Example#1375 - MongoDB\BSON\Binary::getData example
• Example#1376 - MongoDB\BSON\Binary::getType example
• Example#1377 - MongoDB\BSON\Binary::__toString example
• Example#1378 - MongoDB\BSON\Decimal128::__construct example
• Example#1379 - MongoDB\BSON\Decimal128::__toString example
• Example#1380 - MongoDB\BSON\Javascript::__construct example
• Example#1381 - MongoDB\BSON\Javascript::getCode example
• Example#1382 - MongoDB\BSON\Javascript::getScope example
• Example#1383 - MongoDB\BSON\Javascript::__toString example
• Example#1384 - MongoDB\BSON\MaxKey::__construct example
• Example#1385 - MongoDB\BSON\MinKey::__construct example
• Example#1386 - MongoDB\BSON\ObjectId::__construct example
• Example#1387 - MongoDB\BSON\ObjectId::getTimestamp example
• Example#1388 - MongoDB\BSON\ObjectId::__toString example
• Example#1389 - MongoDB\BSON\Regex::__construct example
• Example#1390 - MongoDB\BSON\Regex::getFlags example
• Example#1391 - MongoDB\BSON\Regex::getPattern example
• Example#1392 - MongoDB\BSON\Regex::__toString example
• Example#1393 - MongoDB\BSON\Timestamp::__construct example
• Example#1394 - MongoDB\BSON\Timestamp::__toString example
• Example#1395 - MongoDB\BSON\UTCDateTime::__construct example
• Example#1396 - MongoDB\BSON\UTCDatetime::toDateTime example
• Example#1397 - MongoDB\BSON\UTCDateTime::__toString example
• Example#1398 - MongoDB\BSON\Serializable::bsonSerialize returning an associative array for root document
• Example#1399 - MongoDB\BSON\Serializable::bsonSerialize returning a sequential array for root document
• Example#1400 - MongoDB\BSON\Serializable::bsonSerialize returning an associative array for document field
• Example#1401 - MongoDB\BSON\Serializable::bsonSerialize returning a sequential array for document field
• Example#1402 - MongoDB\BSON\Unserializable::bsonUnserialize example
• Example#1403 - MongoDB\BSON\Int64::__toString example
• Example#1404 - MongoDB\Driver\Exception\WriteException::getWriteResult example
• Example#1405 - Comparing the MySQL APIs
• Example#1406 - Configure commands for using mysqlnd or libmysqlclient
• Example#1407 - Unbuffered query example: mysqli
• Example#1408 - Unbuffered query example: pdo_mysql
• Example#1409 - Problems with setting the character set with SQL
• Example#1410 - Setting the character set example: mysqli
• Example#1411 - Setting the character set example: pdo_mysql
• Example#1412 - Easy migration from the old mysql extension
• Example#1413 - Object-oriented and procedural interface
• Example#1414 - Bad coding style
• Example#1415 - Special meaning of localhost
• Example#1416 - Setting defaults
• Example#1417 - Executing queries
• Example#1418 - Navigation through buffered results
• Example#1419 - Navigation through unbuffered results
• Example#1420 - Text protocol returns strings by default
• Example#1421 - Native data types with mysqlnd and connection option
• Example#1422 - Prepared statement
• Example#1423 - INSERT prepared once, executed multiple times
• Example#1424 - Less round trips using multi-INSERT SQL
• Example#1425 - Native datatypes
• Example#1426 - Output variable binding
• Example#1427 - Using mysqli_result to fetch results
• Example#1428 - Buffered result set for flexible read out
• Example#1429 - Calling a stored procedure
• Example#1430 - Using session variables
• Example#1431 - Fetching results from stored procedures
• Example#1432 - Stored Procedures and Prepared Statements
• Example#1433 - Stored Procedures and Prepared Statements using bind API
• Example#1434 - Multiple Statements
• Example#1435 - SQL Injection
• Example#1436 - Setting autocommit mode with SQL and through the API
• Example#1437 - Commit and rollback
• Example#1438 - Accessing result set meta data
• Example#1439 - Prepared statements metadata
• Example#1440 - $mysqli->affected_rows example
• Example#1441 - mysqli::autocommit example
• Example#1442 - mysqli::begin_transaction example
• Example#1443 - mysqli::change_user example
• Example#1444 - mysqli::character_set_name example
• Example#1445 - mysqli::close example
• Example#1446 - $mysqli->connect_errno example
• Example#1447 - $mysqli->connect_error example
• Example#1448 - mysqli::__construct example
• Example#1449 - Extending mysqli class
• Example#1450 - Manual error handling
• Example#1451 - Generating a Trace File
• Example#1452 - $mysqli->errno example
• Example#1453 - $mysqli->error_list example
• Example#1454 - $mysqli->error example
• Example#1455 - mysqli::execute_query example
• Example#1456 - $mysqli->field_count example
• Example#1457 - mysqli::get_charset example
• Example#1458 - mysqli_get_client_info
• Example#1459 - mysqli_get_client_version
• Example#1460 - A mysqli_get_connection_stats example
• Example#1461 - $mysqli->host_info example
• Example#1462 - $mysqli->protocol_version example
• Example#1463 - $mysqli->server_info example
• Example#1464 - $mysqli->server_version example
• Example#1465 - $mysqli->info example
• Example#1466 - $mysqli->insert_id example
• Example#1467 - mysqli::kill example
• Example#1468 - mysqli::multi_query example
• Example#1469 - mysqli::ping example
• Example#1470 - A mysqli_poll example
• Example#1471 - mysqli::prepare example
• Example#1472 - mysqli::query example
• Example#1473 - mysqli::real_connect example
• Example#1474 - mysqli::real_escape_string example
• Example#1475 - mysqli::select_db example
• Example#1476 - mysqli::set_charset example
• Example#1477 - $mysqli->sqlstate example
• Example#1478 - mysqli::stat example
• Example#1479 - $mysqli->thread_id example
• Example#1480 - mysqli::use_result example
• Example#1481 - $mysqli->warning_count example
• Example#1482 - mysqli_stmt_affected_rows example
• Example#1483 - mysqli_stmt::bind_param example
• Example#1484 - Using ... to provide arguments
• Example#1485 - Object-oriented style
• Example#1486 - Procedural style
• Example#1487 - Object-oriented style
• Example#1488 - Procedural style
• Example#1489 - Object-oriented style
• Example#1490 - Procedural style
• Example#1491 - Object-oriented style
• Example#1492 - Procedural style
• Example#1493 - Object-oriented style
• Example#1494 - Procedural style
• Example#1495 - Execute a prepared statement with bound variables
• Example#1496 - Execute a prepared statement with an array of values
• Example#1497 - Object-oriented style
• Example#1498 - Procedural style
• Example#1499 - Object-oriented style
• Example#1500 - Procedural style
• Example#1501 - Object-oriented style
• Example#1502 - Procedural style
• Example#1503 - Object-oriented style
• Example#1504 - Procedural style
• Example#1505 - Object-oriented style
• Example#1506 - Procedural style
• Example#1507 - mysqli_stmt::prepare example
• Example#1508 - Object-oriented style
• Example#1509 - Procedural style
• Example#1510 - Object-oriented style
• Example#1511 - Object-oriented style
• Example#1512 - Procedural style
• Example#1513 - Object-oriented style
• Example#1514 - Procedural style
• Example#1515 - Creation of a mysqli_result object
• Example#1516 - Object-oriented style
• Example#1517 - Procedural style
• Example#1518 - mysqli::data_seek example
• Example#1519 - Adjusting the result pointer when iterating
• Example#1520 - mysqli_result::fetch_all example
• Example#1521 - mysqli_result::fetch_array example
• Example#1522 - mysqli_result::fetch_assoc example
• Example#1523 - Comparison of mysqli_result iterator and mysqli_result::fetch_assoc usage
• Example#1524 - mysqli_result::fetch_column example
• Example#1525 - Object-oriented style
• Example#1526 - Procedural style
• Example#1527 - Object-oriented style
• Example#1528 - Procedural style
• Example#1529 - Object-oriented style
• Example#1530 - Procedural style
• Example#1531 - mysqli_result::fetch_object example
• Example#1532 - mysqli_result::fetch_row example
• Example#1533 - Object-oriented style
• Example#1534 - Procedural style
• Example#1535 - Object-oriented style
• Example#1536 - Procedural style
• Example#1537 - Object-oriented style
• Example#1538 - Procedural style
• Example#1539 - Object-oriented style
• Example#1540 - Procedural style
• Example#1541 - Object-oriented style
• Example#1542 - Procedural style
• Example#1543 - Error reporting except bad index errors
• Example#1544 - A mysqli_get_client_stats example
• Example#1545 - Connecting to a MySQL Server
• Example#1546 - Creating a Schema and Collection on the MySQL Server
• Example#1547 - Storing and Retrieving Data
• Example#1548 - Fetching and Iterating Multiple Documents
• Example#1549 - mysql_xdevapi\Expression example
• Example#1550 - URI examples
• Example#1551 - mysql_xdevapi\getSession example
• Example#1552 - mysql_xdevapi\RowResult::getWarnings example
• Example#1553 - mysql_xdevapi\RowResult::getWarningsCount example
• Example#1554 - mysql_xdevapi\Client::__construct example
• Example#1555 - mysql_xdevapi\Collection::add example
• Example#1556 - mysql_xdevapi\Collection::addOrReplaceOne example
• Example#1557 - mysql_xdevapi\Collection::getOne example
• Example#1558 - mysql_xdevapi\Collection::count example
• Example#1559 - mysql_xdevapi\Collection::createIndex example
• Example#1560 - mysql_xdevapi\Collection::dropIndex example
• Example#1561 - mysql_xdevapi\Collection::existsInDatabase example
• Example#1562 - mysql_xdevapi\Collection::find example
• Example#1563 - mysql_xdevapi\Collection::getName example
• Example#1564 - mysql_xdevapi\Collection::getOne example
• Example#1565 - mysql_xdevapi\Collection::getSchema example
• Example#1566 - mysql_xdevapi\Collection::getSession example
• Example#1567 - mysql_xdevapi\Collection::modify example
• Example#1568 - mysql_xdevapi\Collection::remove example
• Example#1569 - mysql_xdevapi\Collection::removeOne example
• Example#1570 - mysql_xdevapi\Collection::replaceOne example
• Example#1571 - mysql_xdevapi\CollectionAdd::__construct example
• Example#1572 - mysql_xdevapi\CollectionAdd::execute example
• Example#1573 - mysql_xdevapi\CollectionFind::bind example
• Example#1574 - CollectionFind example
• Example#1575 - CollectionFind example
• Example#1576 - mysql_xdevapi\CollectionFind::fields example
• Example#1577 - mysql_xdevapi\CollectionFind::groupBy example
• Example#1578 - mysql_xdevapi\CollectionFind::having example
• Example#1579 - mysql_xdevapi\CollectionFind::limit example
• Example#1580 - mysql_xdevapi\CollectionFind::lockExclusive example
• Example#1581 - mysql_xdevapi\CollectionFind::lockShared example
• Example#1582 - mysql_xdevapi\CollectionFind::offset example
• Example#1583 - mysql_xdevapi\CollectionFind::sort example
• Example#1584 - mysql_xdevapi\CollectionModify::arrayAppend example
• Example#1585 - mysql_xdevapi\CollectionModify::arrayInsert example
• Example#1586 - mysql_xdevapi\CollectionModify::bind example
• Example#1587 - mysql_xdevapi\CollectionModify::__construct example
• Example#1588 - mysql_xdevapi\CollectionModify::execute example
• Example#1589 - mysql_xdevapi\CollectionModify::limit example
• Example#1590 - mysql_xdevapi\CollectionModify::patch example
• Example#1591 - mysql_xdevapi\CollectionModify::replace example
• Example#1592 - mysql_xdevapi\CollectionModify::set example
• Example#1593 - mysql_xdevapi\CollectionModify::skip example
• Example#1594 - mysql_xdevapi\CollectionModify::sort example
• Example#1595 - mysql_xdevapi\CollectionModify::unset example
• Example#1596 - mysql_xdevapi\CollectionRemove::bind example
• Example#1597 - mysql_xdevapi\Collection::remove example
• Example#1598 - mysql_xdevapi\CollectionRemove::execute example
• Example#1599 - mysql_xdevapi\CollectionRemove::limit example
• Example#1600 - mysql_xdevapi\CollectionRemove::sort example
• Example#1601 - mysql_xdevapi\ColumnResult::__construct example
• Example#1602 - mysql_xdevapi\ColumnResult::getCharacterSetName example
• Example#1603 - mysql_xdevapi\ColumnResult::getCollationName example
• Example#1604 - mysql_xdevapi\ColumnResult::getColumnLabel example
• Example#1605 - mysql_xdevapi\ColumnResult::getColumnName example
• Example#1606 - mysql_xdevapi\ColumnResult::getFractionalDigits example
• Example#1607 - mysql_xdevapi\ColumnResult::getLength example
• Example#1608 - mysql_xdevapi\ColumnResult::getSchemaName example
• Example#1609 - mysql_xdevapi\ColumnResult::getTableLabel example
• Example#1610 - mysql_xdevapi\ColumnResult::getTableName example
• Example#1611 - mysql_xdevapi\ColumnResult::getType example
• Example#1612 - mysql_xdevapi\ColumnResult::isNumberSigned example
• Example#1613 - mysql_xdevapi\ColumnResult::isPadded example
• Example#1614 - mysql_xdevapi\CrudOperationBindable::bind example
• Example#1615 - mysql_xdevapi\CrudOperationLimitable::limit example
• Example#1616 - mysql_xdevapi\CrudOperationSkippable::skip example
• Example#1617 - mysql_xdevapi\CrudOperationSortable::sort example
• Example#1618 - mysql_xdevapi\DatabaseObject::existsInDatabase example
• Example#1619 - mysql_xdevapi\DatabaseObject::getName example
• Example#1620 - mysql_xdevapi\DatabaseObject::getSession example
• Example#1621 - A DocResult example
• Example#1622 - mysql_xdevapi\DocResult::fetchAll example
• Example#1623 - mysql_xdevapi\DocResult::fetchOne example
• Example#1624 - mysql_xdevapi\DocResult::getWarnings example
• Example#1625 - mysql_xdevapi\DocResult::getWarningsCount example
• Example#1626 - execute() examples
• Example#1627 - mysql_xdevapi\ExecutionStatus::__construct example
• Example#1628 - mysql_xdevapi\Expression::__construct example
• Example#1629 - mysql_xdevapi\Result::__construct example
• Example#1630 - mysql_xdevapi\Result::getAffectedItemsCount example
• Example#1631 - mysql_xdevapi\Result::getAutoIncrementValue example
• Example#1632 - mysql_xdevapi\Result::getGeneratedIds example
• Example#1633 - mysql_xdevapi\RowResult::getWarnings example
• Example#1634 - mysql_xdevapi\RowResult::getWarningsCount example
• Example#1635 - mysql_xdevapi\RowResult::__construct example
• Example#1636 - mysql_xdevapi\RowResult::fetchAll example
• Example#1637 - mysql_xdevapi\RowResult::fetchOne example
• Example#1638 - mysql_xdevapi\RowResult::getColumnsCount example
• Example#1639 - mysql_xdevapi\RowResult::getColumnNames example
• Example#1640 - mysql_xdevapi\RowResult::getColumns example
• Example#1641 - mysql_xdevapi\RowResult::getWarnings example
• Example#1642 - mysql_xdevapi\RowResult::getWarningsCount example
• Example#1643 - Schema::__construct example
• Example#1644 - Schema::createCollection example
• Example#1645 - Schema::createCollection validate parameter example
• Example#1646 - Schema::dropCollection example
• Example#1647 - Schema::existsInDatabase example
• Example#1648 - Schema::getCollection example
• Example#1649 - Schema::getCollectionAsTable example
• Example#1650 - mysql_xdevapi\Schema::getCollections example
• Example#1651 - mysql_xdevapi\Schema::getName example
• Example#1652 - mysql_xdevapi\Schema::getSession example
• Example#1653 - mysql_xdevapi\Schema::getTable example
• Example#1654 - mysql_xdevapi\Schema::getTables example
• Example#1655 - mysql_xdevapi\Session::getSchema example
• Example#1656 - mysql_xdevapi\Session::close example
• Example#1657 - mysql_xdevapi\Session::commit example
• Example#1658 - mysql_xdevapi\Session::__construct example
• Example#1659 - mysql_xdevapi\Session::createSchema example
• Example#1660 - mysql_xdevapi\Session::dropSchema example
• Example#1661 - mysql_xdevapi\Session::generateUuid example
• Example#1662 - mysql_xdevapi\Session::getSchema example
• Example#1663 - mysql_xdevapi\Session::getSchema example
• Example#1664 - mysql_xdevapi\Session::getSchemas example
• Example#1665 - mysql_xdevapi\Session::getServerVersion example
• Example#1666 - mysql_xdevapi\Session::listClients example
• Example#1667 - mysql_xdevapi\Session::quoteName example
• Example#1668 - mysql_xdevapi\Session::releaseSavepoint example
• Example#1669 - mysql_xdevapi\Session::rollback example
• Example#1670 - mysql_xdevapi\Session::rollbackTo example
• Example#1671 - mysql_xdevapi\Session::setSavepoint example
• Example#1672 - mysql_xdevapi\Session::sql example
• Example#1673 - mysql_xdevapi\Session::startTransaction example
• Example#1674 - mysql_xdevapi\SqlStatement::bind example
• Example#1675 - mysql_xdevapi\SqlStatement::__construct example
• Example#1676 - mysql_xdevapi\SqlStatement::execute example
• Example#1677 - mysql_xdevapi\SqlStatement::getNextResult example
• Example#1678 - mysql_xdevapi\SqlStatement::getResult example
• Example#1679 - mysql_xdevapi\SqlStatement::hasMoreResults example
• Example#1680 - mysql_xdevapi\SqlStatementResult::__construct example
• Example#1681 - mysql_xdevapi\SqlStatementResult::fetchAll example
• Example#1682 - mysql_xdevapi\SqlStatementResult::fetchOne example
• Example#1683 - mysql_xdevapi\SqlStatementResult::getAffectedItemsCount example
• Example#1684 - mysql_xdevapi\SqlStatementResult::getColumnsCount example
• Example#1685 - mysql_xdevapi\SqlStatementResult::getColumnNames example
• Example#1686 - mysql_xdevapi\SqlStatementResult::getColumns example
• Example#1687 - mysql_xdevapi\SqlStatementResult::getGeneratedIds example
• Example#1688 - mysql_xdevapi\SqlStatementResult::getLastInsertId example
• Example#1689 - mysql_xdevapi\SqlStatementResult::getWarnings example
• Example#1690 - mysql_xdevapi\SqlStatementResult::getWarningsCount example
• Example#1691 - mysql_xdevapi\SqlStatementResult::hasData example
• Example#1692 - mysql_xdevapi\SqlStatementResult::nextResult example
• Example#1693 - mysql_xdevapi\Statement::__construct example
• Example#1694 - mysql_xdevapi\Statement::getNextResult example
• Example#1695 - mysql_xdevapi\Statement::getResult example
• Example#1696 - mysql_xdevapi\Statement::hasMoreResults example
• Example#1697 - mysql_xdevapi\Table::__construct example
• Example#1698 - mysql_xdevapi\Table::count example
• Example#1699 - mysql_xdevapi\Table::delete example
• Example#1700 - mysql_xdevapi\Table::existsInDatabase example
• Example#1701 - mysql_xdevapi\Table::getName example
• Example#1702 - mysql_xdevapi\Table::getSchema example
• Example#1703 - mysql_xdevapi\Table::getSession example
• Example#1704 - mysql_xdevapi\Table::insert example
• Example#1705 - mysql_xdevapi\Table::isView example
• Example#1706 - mysql_xdevapi\Table::count example
• Example#1707 - mysql_xdevapi\Table::update example
• Example#1708 - mysql_xdevapi\TableDelete::bind example
• Example#1709 - mysql_xdevapi\TableDelete::__construct example
• Example#1710 - mysql_xdevapi\TableDelete::execute example
• Example#1711 - mysql_xdevapi\TableDelete::limit example
• Example#1712 - mysql_xdevapi\TableDelete::orderBy example
• Example#1713 - mysql_xdevapi\TableDelete::where example
• Example#1714 - mysql_xdevapi\TableInsert::__construct example
• Example#1715 - mysql_xdevapi\TableInsert::execute example
• Example#1716 - mysql_xdevapi\TableInsert::values example
• Example#1717 - mysql_xdevapi\TableSelect::bind example
• Example#1718 - mysql_xdevapi\TableSelect::__construct example
• Example#1719 - mysql_xdevapi\TableSelect::execute example
• Example#1720 - mysql_xdevapi\TableSelect::groupBy example
• Example#1721 - mysql_xdevapi\TableSelect::having example
• Example#1722 - mysql_xdevapi\TableSelect::limit example
• Example#1723 - mysql_xdevapi\TableSelect::lockExclusive example
• Example#1724 - mysql_xdevapi\TableSelect::lockShared example
• Example#1725 - mysql_xdevapi\TableSelect::offset example
• Example#1726 - mysql_xdevapi\TableSelect::orderBy example
• Example#1727 - mysql_xdevapi\TableSelect::where example
• Example#1728 - mysql_xdevapi\TableUpdate::bind example
• Example#1729 - mysql_xdevapi\TableUpdate::__construct example
• Example#1730 - mysql_xdevapi\TableUpdate::execute example
• Example#1731 - mysql_xdevapi\TableUpdate::limit example
• Example#1732 - mysql_xdevapi\TableUpdate::orderby example
• Example#1733 - mysql_xdevapi\TableUpdate::set example
• Example#1734 - mysql_xdevapi\TableUpdate::where example
• Example#1735 - mysql_xdevapi\Warning::__construct example
• Example#1736 - MySQL extension overview example
• Example#1737 - mysql_affected_rows example
• Example#1738 - mysql_affected_rows example using transactions
• Example#1739 - mysql_client_encoding example
• Example#1740 - mysql_close example
• Example#1741 - mysql_connect example
• Example#1742 - mysql_connect example using hostname:port syntax
• Example#1743 - mysql_connect example using ":/path/to/socket" syntax
• Example#1744 - mysql_create_db alternative example
• Example#1745 - mysql_data_seek example
• Example#1746 - mysql_db_name example
• Example#1747 - mysql_db_query alternative example
• Example#1748 - mysql_drop_db alternative example
• Example#1749 - mysql_errno example
• Example#1750 - mysql_error example
• Example#1751 - mysql_escape_string example
• Example#1752 - Query with aliased duplicate field names
• Example#1753 - mysql_fetch_array with MYSQL_NUM
• Example#1754 - mysql_fetch_array with MYSQL_ASSOC
• Example#1755 - mysql_fetch_array with MYSQL_BOTH
• Example#1756 - An expanded mysql_fetch_assoc example
• Example#1757 - mysql_fetch_field example
• Example#1758 - A mysql_fetch_lengths example
• Example#1759 - mysql_fetch_object example
• Example#1760 - mysql_fetch_object example
• Example#1761 - Fetching one row with mysql_fetch_row
• Example#1762 - A mysql_field_flags example
• Example#1763 - mysql_field_len example
• Example#1764 - mysql_field_name example
• Example#1765 - A mysql_field_table example
• Example#1766 - mysql_field_type example
• Example#1767 - A mysql_free_result example
• Example#1768 - mysql_get_client_info example
• Example#1769 - mysql_get_host_info example
• Example#1770 - mysql_get_proto_info example
• Example#1771 - mysql_get_server_info example
• Example#1772 - Relevant MySQL Statements
• Example#1773 - mysql_insert_id example
• Example#1774 - mysql_list_dbs example
• Example#1775 - Alternate to deprecated mysql_list_fields
• Example#1776 - mysql_list_processes example
• Example#1777 - mysql_list_tables alternative example
• Example#1778 - A mysql_num_fields example
• Example#1779 - mysql_num_rows example
• Example#1780 - A mysql_ping example
• Example#1781 - Invalid Query
• Example#1782 - Valid Query
• Example#1783 - Simple mysql_real_escape_string example
• Example#1784 - mysql_real_escape_string requires a connection example
• Example#1785 - An example SQL Injection Attack
• Example#1786 - mysql_result example
• Example#1787 - mysql_select_db example
• Example#1788 - mysql_stat example
• Example#1789 - Alternative mysql_stat example
• Example#1790 - mysql_tablename example
• Example#1791 - mysql_thread_id example
• Example#1792 - Basic query
• Example#1793 - Inserting with bind variables
• Example#1794 - Binding in the WHERE clause of a query
• Example#1795 - Inserting and fetching a CLOB
• Example#1796 - Using a PL/SQL stored function
• Example#1797 - Using a PL/SQL stored procedure
• Example#1798 - Calling a PL/SQL function that returns a REF CURSOR
• Example#1799 -
• Example#1800 - user_oci8_probes.d for tracing all user-level PHP OCI8 Static Probes with DTrace
• Example#1801 - oci_bind_array_by_name example
• Example#1802 - Inserting data with oci_bind_by_name
• Example#1803 - Binding once for multiple executions
• Example#1804 - Binding with a foreach loop
• Example#1805 - Binding in a WHERE clause
• Example#1806 - Binding with a LIKE clause
• Example#1807 - Binding with REGEXP_LIKE
• Example#1808 - Binding Multiple Values in an IN Clause
• Example#1809 - Binding a ROWID returned by a query
• Example#1810 - Binding a ROWID on INSERT
• Example#1811 - Binding for a PL/SQL stored function
• Example#1812 - Binding parameters for a PL/SQL stored procedure
• Example#1813 - Binding a CLOB column
• Example#1814 - Binding a PL/SQL BOOLEAN
• Example#1815 - oci_client_version example
• Example#1816 - Closing a connection
• Example#1817 - Database connections are not closed until all references are closed
• Example#1818 - Closing a connection opened more than once
• Example#1819 - Connections are closed when variables go out of scope
• Example#1820 - oci_commit example
• Example#1821 - Basic oci_connect using Easy Connect syntax
• Example#1822 - Basic oci_connect using a Network Connect name
• Example#1823 - oci_connect with an explicit character set
• Example#1824 - Using multiple calls to oci_connect
• Example#1825 - oci_define_by_name example
• Example#1826 - oci_define_by_name with case sensitive column names
• Example#1827 - oci_define_by_name with LOB columns
• Example#1828 - oci_define_by_name with an explicit type
• Example#1829 - Displaying the Oracle error message after a connection error
• Example#1830 - Displaying the Oracle error message after a parsing error
• Example#1831 - Displaying the Oracle error message, the problematic statement, and the position of the problem of an execution error
• Example#1832 - oci_execute for queries
• Example#1833 - oci_execute without specifying a mode example
• Example#1834 - oci_execute with OCI_NO_AUTO_COMMIT example
• Example#1835 - oci_execute with different commit modes example
• Example#1836 - oci_execute with OCI_DESCRIBE_ONLY example
• Example#1837 - oci_fetch_all example
• Example#1838 - oci_fetch_all example with OCI_FETCHSTATEMENT_BY_ROW
• Example#1839 - oci_fetch_all with OCI_NUM
• Example#1840 - oci_fetch_array with OCI_BOTH
• Example#1841 - oci_fetch_array with OCI_NUM
• Example#1842 - oci_fetch_array with OCI_ASSOC
• Example#1843 - oci_fetch_array with OCI_RETURN_NULLS
• Example#1844 - oci_fetch_array with OCI_RETURN_LOBS
• Example#1845 - oci_fetch_array with case sensitive column names
• Example#1846 - oci_fetch_array with columns having duplicate names
• Example#1847 - oci_fetch_array with DATE columns
• Example#1848 - oci_fetch_array with REF CURSOR
• Example#1849 - Pagination with oci_fetch_array using a LIMIT-like query
• Example#1850 - oci_fetch_array with Oracle Database Implicit Result Sets
• Example#1851 - oci_fetch_assoc Example
• Example#1852 - oci_fetch_object example
• Example#1853 - oci_fetch_object with case sensitive column names
• Example#1854 - oci_fetch_object with LOBs
• Example#1855 - oci_fetch_row Example
• Example#1856 - oci_fetch with defined variables
• Example#1857 - oci_fetch with oci_result
• Example#1858 - oci_field_name example
• Example#1859 - oci_field_name example
• Example#1860 - oci_field_precision Example
• Example#1861 - oci_field_scale Example
• Example#1862 - oci_field_size example
• Example#1863 - oci_field_type_raw Example
• Example#1864 - oci_field_type example
• Example#1865 - Fetching Implicit Result Sets in a loop
• Example#1866 - Getting child statement handles individually
• Example#1867 - Explicitly setting the Prefetch Count
• Example#1868 - Implicit Result Set example without using oci_get_implicit_resultset
• Example#1869 - oci_new_connect example
• Example#1870 - Binding a REF CURSOR in an Oracle stored procedure call
• Example#1871 - oci_new_descriptor example
• Example#1872 - oci_new_descriptor example
• Example#1873 - oci_num_fields example
• Example#1874 - oci_num_rows example
• Example#1875 - oci_parse example for SQL statements
• Example#1876 - oci_parse example for PL/SQL statements
• Example#1877 - oci_password_change example changing the password of an already connected user
• Example#1878 - oci_password_change example of connecting and changing the password in one step
• Example#1879 - Basic oci_pconnect Example using Easy Connect syntax
• Example#1880 - oci_fetch with oci_result
• Example#1881 - oci_rollback example
• Example#1882 - Rolling back to a SAVEPOINT example
• Example#1883 - oci_server_version example
• Example#1884 - Setting the action
• Example#1885 - Setting the timeout
• Example#1886 - Setting the client identifier to the application user
• Example#1887 - Setting the client information
• Example#1888 - Setting the DBOP
• Example#1889 - Two scripts can use different versions of myfunc() at the same time
• Example#1890 - Setting the module name
• Example#1891 - Changing the LOB prefetch value for a query
• Example#1892 - Changing the default prefetch value for a query
• Example#1893 - Changing the default prefetch for a REF CURSOR fetch
• Example#1894 - Setting the prefetch value when passing a REF CURSOR back to Oracle
• Example#1895 - oci_statement_type example
• Example#1896 - PostgreSQL extension overview example
• Example#1897 - PostgreSQL user defined functions example
• Example#1898 - pg_affected_rows example
• Example#1899 - pg_cancel_query example
• Example#1900 - pg_client_encoding example
• Example#1901 - pg_close example
• Example#1902 - Using pg_connect
• Example#1903 - pg_connection_busy example
• Example#1904 - pg_connection_reset example
• Example#1905 - pg_connection_status example
• Example#1906 - pg_convert example
• Example#1907 - pg_copy_from example
• Example#1908 - pg_copy_to example
• Example#1909 - pg_dbname example
• Example#1910 - pg_delete example
• Example#1911 - pg_end_copy example
• Example#1912 - pg_escape_bytea example
• Example#1913 - pg_escape_identifier example
• Example#1914 - pg_escape_literal example
• Example#1915 - pg_escape_string example
• Example#1916 - Using pg_execute
• Example#1917 - pg_fetch_all_columns example
• Example#1918 - PostgreSQL fetch all
• Example#1919 - pg_fetch_array example
• Example#1920 - pg_fetch_assoc example
• Example#1921 - pg_fetch_object example
• Example#1922 - pg_fetch_result example
• Example#1923 - pg_fetch_row example
• Example#1924 - pg_field_is_null example
• Example#1925 - Getting information about fields
• Example#1926 - Getting information about fields
• Example#1927 - Getting information about fields
• Example#1928 - Getting information about fields
• Example#1929 - Getting table information about a field
• Example#1930 - Getting information about fields
• Example#1931 - Getting information about fields
• Example#1932 - pg_free_result example
• Example#1933 - PostgreSQL NOTIFY message
• Example#1934 - PostgreSQL backend PID
• Example#1935 - pg_get_result example
• Example#1936 - pg_host example
• Example#1937 - pg_insert example
• Example#1938 - pg_last_error example
• Example#1939 - pg_last_notice example
• Example#1940 - pg_last_oid example
• Example#1941 - pg_lo_close example
• Example#1942 - pg_lo_create example
• Example#1943 - pg_lo_export example
• Example#1944 - pg_lo_import example
• Example#1945 - pg_lo_open example
• Example#1946 - pg_lo_read_all example
• Example#1947 - pg_lo_read example
• Example#1948 - pg_lo_seek example
• Example#1949 - pg_lo_tell example
• Example#1950 - pg_lo_truncate example
• Example#1951 - pg_lo_unlink example
• Example#1952 - pg_lo_write example
• Example#1953 - Getting table metadata
• Example#1954 - pg_num_fields example
• Example#1955 - pg_num_rows example
• Example#1956 - pg_options example
• Example#1957 - pg_parameter_status example
• Example#1958 - Using pg_pconnect
• Example#1959 - pg_ping example
• Example#1960 - pg_port example
• Example#1961 - Using pg_prepare
• Example#1962 - pg_put_line example
• Example#1963 - Using pg_query_params
• Example#1964 - pg_query example
• Example#1965 - Using pg_query with multiple statements
• Example#1966 - pg_result_error_field example
• Example#1967 - pg_result_error example
• Example#1968 - pg_result_seek example
• Example#1969 - pg_result_status example
• Example#1970 - pg_select example
• Example#1971 - Using pg_send_execute
• Example#1972 - Using pg_send_prepare
• Example#1973 - Using pg_send_query_params
• Example#1974 - pg_send_query example
• Example#1975 - pg_set_client_encoding example
• Example#1976 - pg_set_error_verbosity example
• Example#1977 - pg_trace example
• Example#1978 - pg_transaction_status example
• Example#1979 - pg_tty example
• Example#1980 - pg_unescape_bytea example
• Example#1981 - pg_untrace example
• Example#1982 - pg_update example
• Example#1983 - pg_version example
• Example#1984 - Backup an existing database
• Example#1985 - SQLite3::changes example
• Example#1986 - SQLite3::close example
• Example#1987 - SQLite3::__construct example
• Example#1988 - max_length aggregation function example
• Example#1989 - SQLite3::createCollation example
• Example#1990 - SQLite3::createFunction example
• Example#1991 - SQLite3::enableExceptions example
• Example#1992 - SQLite3::exec example
• Example#1993 - SQLite3::loadExtension example
• Example#1994 - SQLite3::open example
• Example#1995 - SQLite3::openBlob example
• Example#1996 - Incrementally writing a BLOB
• Example#1997 - SQLite3::prepare example
• Example#1998 - SQLite3::query example
• Example#1999 - SQLite3::querySingle example
• Example#2000 - SQLite3::setAuthorizer example
• Example#2001 - SQLite3::version example
• Example#2002 - SQLite3Stmt::bindParam Usage
• Example#2003 - SQLite3Stmt::bindValue example
• Example#2004 - Inspecting the expanded SQL
• Example#2005 - sqlsrv_begin_transaction example
• Example#2006 - sqlsrv_cancel example
• Example#2007 - sqlsrv_client_info example
• Example#2008 - sqlsrv_close example
• Example#2009 - sqlsrv_commit example
• Example#2010 - Connect using Windows Authentication.
• Example#2011 - Connect by specifying a user name and password.
• Example#2012 - Connect on a specified port.
• Example#2013 - functionname example
• Example#2014 - sqlsrv_execute example
• Example#2015 - Retrieving an associative array.
• Example#2016 - Retrieving a numeric array.
• Example#2017 - sqlsrv_fetch_object example
• Example#2018 - sqlsrv_fetch example
• Example#2019 - sqlsrv_field_metadata example
• Example#2020 - sqlsrv_free_stmt example
• Example#2021 - sqlsrv_get_field example
• Example#2022 - sqlsrv_has_rows example
• Example#2023 - sqlsrv_next_result example
• Example#2024 - sqlsrv_num_fields example
• Example#2025 - sqlsrv_num_rows example
• Example#2026 - sqlsrv_prepare example
• Example#2027 - sqlsrv_query example
• Example#2028 - sqlsrv_rollback example
• Example#2029 - sqlsrv_rows_affected example
• Example#2030 - sqlsrv_send_stream_data example
• Example#2031 - sqlsrv_server_info example
• Example#2032 - cal_days_in_month example
• Example#2033 - cal_from_jd example
• Example#2034 - cal_info example
• Example#2035 - easter_date example
• Example#2036 - easter_days example
• Example#2037 - Calendar functions
• Example#2038 - Overflow behavior
• Example#2039 - jdtojewish Example
• Example#2040 - DateTimeImmutable::add/sub add intervals which cover elapsed time
• Example#2041 - DateTimeImmutable::modify and strtotime increment or decrement individual component values
• Example#2042 - Adding or subtracting times can over- or underflow dates
• Example#2043 - Creating a mutable date time object
• Example#2044 - Creating a mutable date time object
• Example#2045 - DateTime::modify example
• Example#2046 - Beware when adding or subtracting months
• Example#2047 - DateTime::setTimeZone example
• Example#2048 - DateTimeImmutable::add example
• Example#2049 - Further DateTimeImmutable::add examples
• Example#2050 - Beware when adding months
• Example#2051 - DateTimeImmutable::__construct example
• Example#2052 - Intricacies of DateTimeImmutable::__construct
• Example#2053 - Changing the associated timezone
• Example#2054 - Using a relative date/time string
• Example#2055 - DateTimeImmutable::createFromFormat example
• Example#2056 - Intricacies of DateTimeImmutable::createFromFormat
• Example#2057 - Format string with literal characters
• Example#2058 - Overflow behaviour
• Example#2059 - Overflowing day name behaviour
• Example#2060 - Detecting overflown dates
• Example#2061 - Greedy parsing behaviour
• Example#2062 - Creating an immutable date time object
• Example#2063 - Creating an immutable date time object
• Example#2064 - DateTimeImmutable::getLastErrors example
• Example#2065 - DateTimeImmutable::modify example
• Example#2066 - Beware when adding or subtracting months
• Example#2067 - DateTimeImmutable::setDate example
• Example#2068 - Values exceeding ranges are added to their parent values
• Example#2069 - DateTimeImmutable::setISODate example
• Example#2070 - Values exceeding ranges are added to their parent values
• Example#2071 - Finding the month a week is in
• Example#2072 - DateTimeImmutable::setTime example
• Example#2073 - Values exceeding ranges are added to their parent values
• Example#2074 - DateTimeImmutable::setTimestamp example
• Example#2075 - DateTimeImmutable::setTimeZone example
• Example#2076 - DateTimeImmutable::sub example
• Example#2077 - Further DateTimeImmutable::sub examples
• Example#2078 - Beware when subtracting months
• Example#2079 - DateTimeImmutable::diff example
• Example#2080 - DateTimeInterface::diff during DST changeover
• Example#2081 - DateTime object comparison
• Example#2082 - DateTime::format example
• Example#2083 - DateTime::getOffset example
• Example#2084 - DateTime::getTimestamp example
• Example#2085 - DateTime::getTimezone example
• Example#2086 - Creating and attaching DateTimeZone to a DateTimeImmutable
• Example#2087 - Catching errors when instantiating DateTimeZone
• Example#2088 - DateTimeZone::getLocation example
• Example#2089 - DateTimeZone::getOffset examples
• Example#2090 - A timezone_transitions_get example
• Example#2091 - A timezone_transitions_get example with timestampBegin set
• Example#2092 - A timezone_abbreviations_list example
• Example#2093 - A DateTimeZone::listIdentifiers example
• Example#2094 - Listing identifiers for a specific region
• Example#2095 - Listing identifiers for multiple regions
• Example#2096 - Listing identifiers for a single country
• Example#2097 - Constructing and using DateInterval objects
• Example#2098 - DateInterval example
• Example#2099 - Parsing valid date intervals
• Example#2100 - Parsing combinations and negative intervals
• Example#2101 - Parsing special relative date intervals
• Example#2102 - DateInterval example
• Example#2103 - DateInterval and carry over points
• Example#2104 - DateInterval and DateTime::diff with the %a and %d modifiers
• Example#2105 - DatePeriod example
• Example#2106 - DatePeriod example with DatePeriod::EXCLUDE_START_DATE
• Example#2107 - DatePeriod example showing all last Thursdays in a year
• Example#2108 - DatePeriod::getDateInterval example
• Example#2109 - DatePeriod::getEndDate example
• Example#2110 - DatePeriod::getEndDate without an end date
• Example#2111 - DatePeriod::getStartDate example
• Example#2112 - checkdate example
• Example#2113 - Getting the default timezone
• Example#2114 - Getting the abbreviation of a timezone
• Example#2115 - Getting the default timezone
• Example#2116 - date_parse_from_format example
• Example#2117 - date_parse_from_format with warnings example
• Example#2118 - date_parse_from_format with errors example
• Example#2119 - A date_parse example with a comprehensive datetime string
• Example#2120 - date_parse with timezone abbreviation information
• Example#2121 - date_parse with timezone identifier information
• Example#2122 - date_parse with a minimal string
• Example#2123 - date_parse with relative formats
• Example#2124 - date_parse with side-effects
• Example#2125 - A date_sun_info example
• Example#2126 - Polar night, with some processing
• Example#2127 - Midnight sun (Tromsø, Norway)
• Example#2128 - Calculating length of day (Kyiv)
• Example#2129 - date_sunrise example
• Example#2130 - No sunrise
• Example#2131 - date_sunset example
• Example#2132 - No sunset
• Example#2133 - date examples
• Example#2134 - Escaping characters in date
• Example#2135 - date and mktime example
• Example#2136 - date Formatting
• Example#2137 - getdate example
• Example#2138 - gettimeofday example
• Example#2139 - gmdate example
• Example#2140 - gmmktime basic example
• Example#2141 - gmstrftime example
• Example#2142 - idate example
• Example#2143 - localtime example
• Example#2144 - Timing script execution
• Example#2145 - microtime and REQUEST_TIME_FLOAT
• Example#2146 - mktime basic example
• Example#2147 - mktime example
• Example#2148 - Last day of a month
• Example#2149 - strftime locale examples
• Example#2150 - ISO 8601:1988 week number example
• Example#2151 - Cross platform compatible example using the %e modifier
• Example#2152 - Display all known and unknown formats.
• Example#2153 - strptime example
• Example#2154 - A strtotime example
• Example#2155 - Checking for failure
• Example#2156 - time example
• Example#2157 - A timezone_name_from_abbr example
• Example#2158 - Getting the timezonedb version
• Example#2159 -
• Example#2160 -
• Example#2161 - Measure several code blocks execution and get the total
• Example#2162 - Closing an open file descriptor
• Example#2163 - Setting and clearing a lock
• Example#2164 - Opening a file descriptor
• Example#2165 - Positioning in a file
• Example#2166 - Setting the baud rate on a serial port
• Example#2167 - chdir example
• Example#2168 - chroot example
• Example#2169 - closedir example
• Example#2170 - dir example
• Example#2171 - getcwd example
• Example#2172 - opendir example
• Example#2173 - List all entries in a directory
• Example#2174 - List all entries in the current directory and strip out . and ..
• Example#2175 - A simple scandir example
• Example#2176 - A finfo_buffer example
• Example#2177 - A finfo_file example
• Example#2178 - Object-oriented style
• Example#2179 - Procedural style
• Example#2180 - mime_content_type Example
• Example#2181 - basename example
• Example#2182 - Changing a file's group
• Example#2183 - Simple chown usage
• Example#2184 - clearstatcache example
• Example#2185 - copy example
• Example#2186 - dirname example
• Example#2187 - disk_free_space example
• Example#2188 - disk_total_space example
• Example#2189 - A simple fclose example
• Example#2190 - fdatasync example
• Example#2191 - Handling timeouts with feof
• Example#2192 - feof example with an invalid file pointer
• Example#2193 - File write example using fflush
• Example#2194 - A fgetc example
• Example#2195 - Read and print the entire contents of a CSV file
• Example#2196 - Reading a file line by line
• Example#2197 - Reading a PHP file line-by-line
• Example#2198 - Testing whether a file exists
• Example#2199 - Get and output the source of the homepage of a website
• Example#2200 - Searching within the include_path
• Example#2201 - Reading a section of a file
• Example#2202 - Using stream contexts
• Example#2203 - Simple usage example
• Example#2204 - Using flags
• Example#2205 - file example
• Example#2206 - fileatime example
• Example#2207 - A filectime example
• Example#2208 - Finding the group of a file
• Example#2209 - Comparing the inode of a file with the current file
• Example#2210 - filemtime example
• Example#2211 - Finding the owner of a file
• Example#2212 - Display permissions as an octal value
• Example#2213 - Display full permissions
• Example#2214 - filesize example
• Example#2215 - filetype example
• Example#2216 - flock example
• Example#2217 - flock using the LOCK_NB option
• Example#2218 - Checking a color name against a shell wildcard pattern
• Example#2219 - fopen examples
• Example#2220 - Using fpassthru with binary files
• Example#2221 - fputcsv example
• Example#2222 - A simple fread example
• Example#2223 - Binary fread example
• Example#2224 - Remote fread examples
• Example#2225 - fscanf Example
• Example#2226 - Contents of users.txt
• Example#2227 - fseek example
• Example#2228 - fstat example
• Example#2229 - fsync example
• Example#2230 - ftell example
• Example#2231 - File truncation example
• Example#2232 - A simple fwrite example
• Example#2233 - Convenient way how glob can replace opendir and friends.
• Example#2234 - is_dir example
• Example#2235 - is_executable example
• Example#2236 - is_file example
• Example#2237 - Create and confirm if a file is a symbolic link
• Example#2238 - is_readable example
• Example#2239 - is_uploaded_file example
• Example#2240 - is_writable example
• Example#2241 - Changing the group of a symbolic link
• Example#2242 - Changing the owner of a symbolic link
• Example#2243 - Creating a simple hard link
• Example#2244 - linkinfo example
• Example#2245 - Comparison of stat and lstat
• Example#2246 - mkdir example
• Example#2247 - mkdir using the recursive parameter
• Example#2248 - Uploading multiple files
• Example#2249 - Contents of sample.ini
• Example#2250 - parse_ini_file example
• Example#2251 - parse_ini_file parsing a php.ini file
• Example#2252 - Value Interpolation
• Example#2253 - Escaping Characters
• Example#2254 - pathinfo Example
• Example#2255 - pathinfo example showing difference between null and no extension
• Example#2256 - pathinfo example for a dot-file
• Example#2257 - pclose example
• Example#2258 - popen example
• Example#2259 - popen example
• Example#2260 - Forcing a download using readfile
• Example#2261 - readlink example
• Example#2262 - realpath_cache_get example
• Example#2263 - realpath_cache_size example
• Example#2264 - realpath example
• Example#2265 - realpath on Windows
• Example#2266 - Example with rename
• Example#2267 - rewind overwriting example
• Example#2268 - rmdir example
• Example#2269 - stat example
• Example#2270 - Using stat information together with touch
• Example#2271 - Create a symbolic link
• Example#2272 - tempnam example
• Example#2273 - tmpfile example
• Example#2274 - touch example
• Example#2275 - touch using the mtime parameter
• Example#2276 - umask example
• Example#2277 - Basic unlink usage
• Example#2278 - Example usage of inotify
• Example#2279 - Checks if system administrator has signed the file
• Example#2280 - Prints names of all extended attributes of file
• Example#2281 - Removes all extended attributes of a file
• Example#2282 - Sets extended attributes on .wav file
• Example#2283 - xattr_supported example
• Example#2284 - xdiff_file_bdiff_size example
• Example#2285 - xdiff_file_bdiff example
• Example#2286 - xdiff_file_bpatch example
• Example#2287 - xdiff_file_diff_binary example
• Example#2288 - xdiff_file_diff example
• Example#2289 - xdiff_file_merge3 example
• Example#2290 - xdiff_file_patch_binary example
• Example#2291 - xdiff_file_patch example
• Example#2292 - Patch reversing example
• Example#2293 - xdiff_file_rabdiff example
• Example#2294 - xdiff_string_bdiff_size example
• Example#2295 - xdiff_string_diff example
• Example#2296 - xdiff_string_patch example
• Example#2297 - Enchant Usage Example
• Example#2298 - List the backends provided by the given broker
• Example#2299 - A enchant_broker_dict_exists example
• Example#2300 - List all available dictionaries for one broker
• Example#2301 - A enchant_broker_request_dict example
• Example#2302 - Adding a word to a PWL
• Example#2303 - A enchant_dict_describe example
• Example#2304 - A enchant_dict_quick_check example
• Example#2305 - A enchant_dict_suggest example
• Example#2306 - Usage example.
• Example#2307 - Using Gender\Gender::country
• Example#2308 - bindtextdomain example
• Example#2309 - gettext-check
• Example#2310 - ngettext example
• Example#2311 - iconv_get_encoding example
• Example#2312 - iconv_mime_decode_headers example
• Example#2313 - iconv_mime_decode example
• Example#2314 - iconv_mime_encode example
• Example#2315 - iconv_set_encoding example
• Example#2316 - iconv example
• Example#2317 - ob_iconv_handler example:
• Example#2318 - Example of using the procedural API
• Example#2319 - Example of using the object-oriented API
• Example#2320 - FRENCH_COLLATION rules
• Example#2321 - ALTERNATE_HANDLING rules
• Example#2322 - CASE_FIRST rules
• Example#2323 - CASE_LEVEL rules
• Example#2324 - collator_asort example
• Example#2325 - collator_compare example
• Example#2326 - Comparing strings without diacritics or case-sensitivity
• Example#2327 - Collator::__construct example
• Example#2328 - collator_create example
• Example#2329 - collator_get_attribute example
• Example#2330 - collator_get_error_code example
• Example#2331 - collator_get_error_message example
• Example#2332 - collator_get_locale example
• Example#2333 - collator_get_sort_keyexample
• Example#2334 - collator_get_strength example
• Example#2335 - collator_set_attribute example
• Example#2336 - collator_set_strength example
• Example#2337 - collator_sort_with_sort_keys example
• Example#2338 - collator_sort example
• Example#2339 - numfmt_create example
• Example#2340 - NumberFormatter::create example
• Example#2341 - numfmt_format_currency example
• Example#2342 - OO example
• Example#2343 - numfmt_format example
• Example#2344 - OO example
• Example#2345 - numfmt_get_attribute example
• Example#2346 - OO example
• Example#2347 - numfmt_get_error_code example
• Example#2348 - OO example
• Example#2349 - numfmt_get_error_message example
• Example#2350 - OO example
• Example#2351 - numfmt_get_locale example
• Example#2352 - numfmt_get_pattern example
• Example#2353 - OO example
• Example#2354 - numfmt_get_symbol example
• Example#2355 - OO example
• Example#2356 - numfmt_get_text_attribute example
• Example#2357 - OO example
• Example#2358 - numfmt_parse_currency example
• Example#2359 - OO example
• Example#2360 - numfmt_parse example
• Example#2361 - OO example
• Example#2362 - numfmt_set_attribute example
• Example#2363 - OO example
• Example#2364 - numfmt_set_pattern example
• Example#2365 - OO example
• Example#2366 - numfmt_set_symbol example
• Example#2367 - OO example
• Example#2368 - numfmt_set_text_attribute example
• Example#2369 - OO example
• Example#2370 - locale_accept_from_http example
• Example#2371 - OO example
• Example#2372 - locale_compose example
• Example#2373 - OO example
• Example#2374 - Subtag limits
• Example#2375 - locale_filter_matches example
• Example#2376 - OO example
• Example#2377 - locale_get_all_variants example
• Example#2378 - OO example
• Example#2379 - locale_get_default example
• Example#2380 - OO example
• Example#2381 - locale_get_display_language example
• Example#2382 - OO example
• Example#2383 - locale_get_display_name example
• Example#2384 - OO example
• Example#2385 - locale_get_display_region example
• Example#2386 - OO example
• Example#2387 - locale_get_display_script example
• Example#2388 - OO example
• Example#2389 - locale_get_display_variant example
• Example#2390 - OO example
• Example#2391 - locale_get_keywords example
• Example#2392 - OO example
• Example#2393 - locale_get_primary_language example
• Example#2394 - OO example
• Example#2395 - locale_get_region example
• Example#2396 - OO example
• Example#2397 - locale_get_script example
• Example#2398 - OO example
• Example#2399 - locale_lookup example
• Example#2400 - OO example
• Example#2401 - locale_parse example
• Example#2402 - OO example
• Example#2403 - locale_set_default example
• Example#2404 - OO example
• Example#2405 - Normalizer::getRawDecomposition example
• Example#2406 - normalizer_is_normalized example
• Example#2407 - OO example
• Example#2408 - normalizer_normalize example
• Example#2409 - OO example
• Example#2410 - msgfmt_create example
• Example#2411 - OO example
• Example#2412 - msgfmt_format_message example
• Example#2413 - OO example
• Example#2414 - msgfmt_format example
• Example#2415 - OO example
• Example#2416 - msgfmt_get_error_message example
• Example#2417 - OO example
• Example#2418 - msgfmt_get_locale example
• Example#2419 - OO example
• Example#2420 - msgfmt_get_pattern example
• Example#2421 - OO example
• Example#2422 - msgfmt_parse_message example
• Example#2423 - OO example
• Example#2424 - msgfmt_parse example
• Example#2425 - OO example
• Example#2426 - msgfmt_set_pattern example
• Example#2427 - OO example
• Example#2428 - IntlCalendar::add
• Example#2429 - IntlCalendar::after
• Example#2430 - IntlCalendar::clear examples
• Example#2431 - IntlCalendar::createInstance
• Example#2432 - IntlCalendar::equals
• Example#2433 - IntlCalendar::fieldDifference
• Example#2434 - IntlCalendar::fromDateTime
• Example#2435 - IntlCalendar::get
• Example#2436 - IntlCalendar::getActualMaximum
• Example#2437 - IntlCalendar::getAvailableLocales
• Example#2438 - IntlCalendar::getDayOfWeekType
• Example#2439 - IntlCalendar::getErrorCode and IntlCalendar::getErrorMessage
• Example#2440 - IntlCalendar::getErrorMessage
• Example#2441 - IntlCalendar::getFirstDayOfWeek
• Example#2442 - IntlCalendar::getKeyworkValuesForLocale
• Example#2443 - Maxima examples
• Example#2444 - IntlCalendar::getLocale
• Example#2445 - IntlCalendar::getMinimalDaysInFirstWeek
• Example#2446 - IntlCalendar::getNow
• Example#2447 - IntlCalendar::getRepeatedWallTimeOption
• Example#2448 - IntlCalendar::getSkippedWallTimeOption
• Example#2449 - IntlCalendar::getTime
• Example#2450 - IntlCalendar::getTimeZone
• Example#2451 - IntlCalendar::getType
• Example#2452 - IntlCalendar::inDaylightTime
• Example#2453 - IntlCalendar::isEquivalentTo
• Example#2454 - IntlCalendar::isLenient
• Example#2455 - IntlCalendar::isWeekend
• Example#2456 - IntlCalendar::roll
• Example#2457 - IntlCalendar::set
• Example#2458 - IntlCalendar::setFirstDayOfWeek
• Example#2459 - IntlCalendar::setTime
• Example#2460 - IntlCalendar::setTimeZone
• Example#2461 - IntlCalendar::toDateTime
• Example#2462 - datefmt_create example
• Example#2463 - OO example
• Example#2464 - datefmt_format example
• Example#2465 - OO example
• Example#2466 - With IntlCalendar object
• Example#2467 - IntlDateFormatter::formatObject examples
• Example#2468 - datefmt_get_calendar example
• Example#2469 - OO example
• Example#2470 - datefmt_get_datetype example
• Example#2471 - OO example
• Example#2472 - datefmt_get_error_code example
• Example#2473 - OO example
• Example#2474 - datefmt_get_error_message example
• Example#2475 - OO example
• Example#2476 - datefmt_get_locale example
• Example#2477 - OO example
• Example#2478 - datefmt_get_pattern example
• Example#2479 - OO example
• Example#2480 - datefmt_get_timetype example
• Example#2481 - OO example
• Example#2482 - datefmt_get_timezone_id example
• Example#2483 - OO example
• Example#2484 - IntlDateFormatter::getCalendarObject example
• Example#2485 - IntlDateFormatter::getTimeZone examples
• Example#2486 - datefmt_is_lenient example
• Example#2487 - OO example
• Example#2488 - datefmt_localtime example
• Example#2489 - OO example
• Example#2490 - OO example
• Example#2491 - datefmt_parse example
• Example#2492 - datefmt_set_calendar example
• Example#2493 - OO example
• Example#2494 - Example with IntlCalendar argument
• Example#2495 - datefmt_set_lenient example
• Example#2496 - OO example
• Example#2497 - datefmt_set_pattern example
• Example#2498 - OO example
• Example#2499 - IntlDateFormatter::setTimeZone examples
• Example#2500 - resourcebundle_count example
• Example#2501 - OO example
• Example#2502 - resourcebundle_create example
• Example#2503 - ResourceBundle::create example
• Example#2504 - resourcebundle_get_error_code example
• Example#2505 - OO example
• Example#2506 - resourcebundle_get_error_message example
• Example#2507 - OO example
• Example#2508 - resourcebundle_get example
• Example#2509 - OO example
• Example#2510 - resourcebundle_locales example
• Example#2511 - OO example
• Example#2512 - Spoofchecker::areConfusable example
• Example#2513 - Spoofchecker::isSuspicious example
• Example#2514 - Retrieving the registered transliterator IDs
• Example#2515 - Converting escaped UTF-16 code units
• Example#2516 - IntlDatePatternGenerator::getBestPattern example
• Example#2517 - Converting from UTF-8 to UTF-16 and back
• Example#2518 - Invalid characters in input
• Example#2519 - Characters which cannot be encoded
• Example#2520 - grapheme_extract example
• Example#2521 - grapheme_stripos example
• Example#2522 - grapheme_stristr example
• Example#2523 - grapheme_strlen example
• Example#2524 - grapheme_strpos example
• Example#2525 - grapheme_strripos example
• Example#2526 - grapheme_strrpos example
• Example#2527 - grapheme_strstr example
• Example#2528 - grapheme_substr example
• Example#2529 - idn_to_ascii example
• Example#2530 - idn_to_utf8 example
• Example#2531 - Testing different code points
• Example#2532 - Testing different code points
• Example#2533 - Testing different code points
• Example#2534 - Testing different code points
• Example#2535 - Testing different code points
• Example#2536 - Testing different code points
• Example#2537 - Testing different code points
• Example#2538 - Testing different code points
• Example#2539 - Testing different code points
• Example#2540 - Enumerating over a sample range of code points
• Example#2541 - Enumerating over a sample range of code points
• Example#2542 - Testing different code points
• Example#2543 - Testing different code points
• Example#2544 - Testing different code points
• Example#2545 - Testing different code points
• Example#2546 - Testing different code points
• Example#2547 - Testing different properties
• Example#2548 - Testing different properties
• Example#2549 - Testing different properties
• Example#2550 - Testing different code points
• Example#2551 - Testing different properties
• Example#2552 - Testing different properties
• Example#2553 - Testing different properties
• Example#2554 - Testing different properties
• Example#2555 - Testing different properties
• Example#2556 - Testing different properties
• Example#2557 - Testing different code points
• Example#2558 - Testing different code points
• Example#2559 - Testing different code points
• Example#2560 - Testing different code points
• Example#2561 - Testing different code points
• Example#2562 - Testing different code points
• Example#2563 - Testing different code points
• Example#2564 - Testing different code points
• Example#2565 - Testing different code points
• Example#2566 - Testing different code points
• Example#2567 - Testing different code points
• Example#2568 - Testing different code points
• Example#2569 - Testing different code points
• Example#2570 - Testing different code points
• Example#2571 - Testing different code points
• Example#2572 - Testing different code points
• Example#2573 - Testing different code points
• Example#2574 - Testing different code points
• Example#2575 - Testing different code points
• Example#2576 - Testing different code points
• Example#2577 - Testing different code points
• Example#2578 - Testing different code points
• Example#2579 - Testing different code points
• Example#2580 - Testing different code points
• Example#2581 - Testing different code points
• Example#2582 - Testing different code points
• Example#2583 - Testing different code points
• Example#2584 - Testing different code points
• Example#2585 - Testing different code points
• Example#2586 - Testing different code points
• Example#2587 - Testing different code points
• Example#2588 - Testing different code points
• Example#2589 - intl_error_name example
• Example#2590 - intl_get_error_code example
• Example#2591 - intl_get_error_message example
• Example#2592 - intl_is_failure example
• Example#2593 - php.ini setting examples
• Example#2594 - php.ini setting for EUC-JP users
• Example#2595 - php.ini setting for SJIS users
• Example#2596 - Disable HTTP input conversion in php.ini
• Example#2597 - php.ini setting example
• Example#2598 - Script example
• Example#2599 - Testing different code points
• Example#2600 - mb_convert_case example
• Example#2601 - mb_convert_case example with non-Latin UTF-8 text
• Example#2602 - mb_convert_encoding example
• Example#2603 - mb_convert_kana example
• Example#2604 - mb_convert_variables example
• Example#2605 - map example
• Example#2606 - map example escapes JavaScript string
• Example#2607 - mb_detect_encoding example
• Example#2608 - Effect of strict parameter
• Example#2609 - Effect of order when multiple encodings match
• Example#2610 - mb_detect_order examples
• Example#2611 - Example showing useless detect orders
• Example#2612 - mb_encode_mimeheader example
• Example#2613 - map example
• Example#2614 - mb_encode_numericentity example
• Example#2615 - mb_encoding_aliases example
• Example#2616 - mb_ereg_replace_callback example
• Example#2617 - mb_ereg_replace_callback using anonymous function
• Example#2618 - mb_internal_encoding example
• Example#2619 - mb_list_encodings example
• Example#2620 -
• Example#2621 - mb_output_handler example
• Example#2622 - mb_preferred_mime_name example
• Example#2623 - mb_strimwidth example
• Example#2624 - mb_strtolower example
• Example#2625 - mb_strtolower example with non-Latin UTF-8 text
• Example#2626 - mb_strtoupper example
• Example#2627 - mb_strtoupper example with non-Latin UTF-8 text
• Example#2628 - mb_strwidth example
• Example#2629 - mb_substitute_character example
• Example#2630 - mb_substr_count example
• Example#2631 - pspell_add_to_personal
• Example#2632 - pspell_check Example
• Example#2633 - pspell_add_to_personal Example
• Example#2634 - pspell_config_create
• Example#2635 - pspell_config_ignore
• Example#2636 - pspell_config_mode Example
• Example#2637 - pspell_config_personal
• Example#2638 - pspell_config_repl
• Example#2639 - pspell_config_runtogether
• Example#2640 - pspell_new_config
• Example#2641 - pspell_new_personal
• Example#2642 - pspell_new
• Example#2643 - pspell_add_to_personal
• Example#2644 - pspell_store_replacement
• Example#2645 - pspell_suggest example
• Example#2646 - Basic recode_file example
• Example#2647 - Basic recode_string example
• Example#2648 - exif_imagetype example
• Example#2649 - exif_read_data example
• Example#2650 - exif_read_data with streams available as of PHP 7.2.0
• Example#2651 - exif_tagname example
• Example#2652 - exif_thumbnail example
• Example#2653 - PNG creation with PHP
• Example#2654 - Adding watermarks to images using alpha channels
• Example#2655 - Using imagecopymerge to create a translucent watermark
• Example#2656 - Using gd_info
• Example#2657 - getimagesize and MIME types
• Example#2658 - getimagesize example
• Example#2659 - getimagesize (URL)
• Example#2660 - getimagesize() returning IPTC
• Example#2661 - getimagesizefromstring example
• Example#2662 - image_type_to_extension example
• Example#2663 - image_type_to_mime_type example
• Example#2664 - image2wbmp example
• Example#2665 - imageaffinematrixconcat example
• Example#2666 - imageaffinematrixget example
• Example#2667 - imagealphablending usage example
• Example#2668 - A comparison of two lines, one with anti-aliasing switched on
• Example#2669 - Drawing a circle with imagearc
• Example#2670 - Saving a BMP file
• Example#2671 - imagechar example
• Example#2672 - imagecharup example
• Example#2673 - imagecolorallocate example
• Example#2674 - Example of using imagecolorallocatealpha
• Example#2675 - Convert typical alpha values for use with imagecolorallocatealpha
• Example#2676 - Access distinct RGB values
• Example#2677 - Human-readable RGB values using imagecolorsforindex
• Example#2678 - Search for a set of colors in an image
• Example#2679 - Search for a set of colors in an image
• Example#2680 - Example of using imagecolorclosesthwb
• Example#2681 - Using imagecolordeallocate
• Example#2682 - Get colors from the GD logo
• Example#2683 - Get colors from the GD logo
• Example#2684 - imagecolormatch example
• Example#2685 - Using imagecoloresolve to get colors from an image
• Example#2686 - Using imagecoloresolvealpha to get colors from an image
• Example#2687 - imagecolorset example
• Example#2688 - imagecolorsforindex example
• Example#2689 - Getting total number of colors in an image using imagecolorstotal
• Example#2690 - imagecolortransparent example
• Example#2691 - Embossing the PHP.net logo
• Example#2692 - Gaussian blur
• Example#2693 - Cropping the PHP.net logo
• Example#2694 - Merging two copies of the PHP.net logo with 75% transparency
• Example#2695 - imagecopymergegray usage
• Example#2696 - Simple example
• Example#2697 - Resampling an image proportionally
• Example#2698 - Resizing an image
• Example#2699 - Creating a new GD image stream and outputting an image.
• Example#2700 - Convert an BMP image to a PNG image using imagecreatefrombmp
• Example#2701 - imagecreatefromgd2 example
• Example#2702 - imagecreatefromgd2part example
• Example#2703 - imagecreatefromgd example
• Example#2704 - Example to handle an error during loading of a GIF
• Example#2705 - Example to handle an error during loading of a JPEG
• Example#2706 - Example to handle an error during loading of a PNG
• Example#2707 - imagecreatefromstring example
• Example#2708 - Example to handle an error during loading of a WBMP
• Example#2709 - Convert an WebP image to a jpeg image using imagecreatefromwebp
• Example#2710 - Convert an XBM image to a png image using imagecreatefromxbm
• Example#2711 - Creating an image instance using imagecreatefromxpm
• Example#2712 - Creating a new GD image stream and outputting an image.
• Example#2713 - imagecrop example
• Example#2714 - Proper handling of auto-cropping
• Example#2715 - imagedashedline example
• Example#2716 - Alternative to imagedashedline
• Example#2717 - Using imagedestroy prior to PHP 8.0.0
• Example#2718 - imageellipse example
• Example#2719 - imagefill example
• Example#2720 - Creating a 3D looking pie
• Example#2721 - imagefilledellipse example
• Example#2722 - imagefilledpolygon example
• Example#2723 - imagefilledrectangle usage
• Example#2724 - Filling an ellipse with a color
• Example#2725 - imagefilter grayscale example
• Example#2726 - imagefilter brightness example
• Example#2727 - imagefilter colorize example
• Example#2728 - imagefilter negate example
• Example#2729 - imagefilter pixelate example
• Example#2730 - imagefilter scatter example
• Example#2731 - Flips an image vertically
• Example#2732 - Flips the image horizontally
• Example#2733 - Using imagefontheight on built-in fonts
• Example#2734 - Using imagefontheight together with imageloadfont
• Example#2735 - Using imagefontwidth on built-in fonts
• Example#2736 - Using imagefontwidth together with imageloadfont
• Example#2737 - imageftbbox example
• Example#2738 - imagefttext example
• Example#2739 - imagegammacorrect usage
• Example#2740 - Outputting a GD2 image
• Example#2741 - Saving a GD2 image
• Example#2742 - Outputting a GD image
• Example#2743 - Saving a GD image
• Example#2744 - imagegetclip example
• Example#2745 - Outputting an image using imagegif
• Example#2746 - Converting a PNG image to GIF using imagegif
• Example#2747 - imagegrabscreen example
• Example#2748 - imagegrabwindow example
• Example#2749 - Turn on interlacing using imageinterlace
• Example#2750 - Simple detection of true color image instances using imageistruecolor
• Example#2751 - Outputting a JPEG image to the browser
• Example#2752 - Saving a JPEG image to a file
• Example#2753 - Outputting the image at 75% quality to the browser
• Example#2754 - imagelayereffect example
• Example#2755 - Drawing a thick line
• Example#2756 - imageloadfont usage example
• Example#2757 - imageopenpolygon example
• Example#2758 - imagepalettecopy example
• Example#2759 - Converts any image object to true color
• Example#2760 - imagepolygon example
• Example#2761 - Simple imagerectangle example
• Example#2762 - Setting and getting the resolution of an image
• Example#2763 - Rotate an image 180 degrees
• Example#2764 - Basic imagesavealpha Usage
• Example#2765 - imagesetbrush example
• Example#2766 - imagesetinterpolation example
• Example#2767 - imagesetpixel example
• Example#2768 - imagesetstyle example
• Example#2769 - imagesetthickness example
• Example#2770 - imagesettile example
• Example#2771 - imagestring example
• Example#2772 - imagestringup example
• Example#2773 - Using imagesx
• Example#2774 - Using imagesy
• Example#2775 - Converting a true color image to a palette-based image
• Example#2776 - imagettfbbox example
• Example#2777 - imagettftext example
• Example#2778 - Checking for PNG support
• Example#2779 - Outputting a WBMP image
• Example#2780 - Saving the WBMP image
• Example#2781 - Outputting the image with a different foreground
• Example#2782 - Saving an WebP file
• Example#2783 - Saving an XBM file
• Example#2784 - Saving an XBM file with a different foreground color
• Example#2785 - Embedding IPTC data into a JPEG
• Example#2786 - iptcparse() used together with getimagesize
• Example#2787 - jpeg2wbmp example
• Example#2788 - png2wbmp example
• Example#2789 - Gmagick Example
• Example#2790 - Gmagick::despeckleimage example
• Example#2791 - Gmagick::setCompressionQuality
• Example#2792 - Creating a thumbnail in Imagick
• Example#2793 - Make a thumbnail of all JPG files in a directory
• Example#2794 - Creating a reflection of an image
• Example#2795 - Filling text with gradient
• Example#2796 - Read in GIF image and resize all frames
• Example#2797 - Create a PHP logo
• Example#2798 - Using Imagick::adaptiveBlurImage:
• Example#2799 - Using Imagick::adaptiveResizeImage
• Example#2800 - A Imagick::adaptiveSharpenImage example
• Example#2801 - Imagick::adaptiveThresholdImage
• Example#2802 - Imagick::addNoiseImage
• Example#2803 - Imagick::affineTransformImage
• Example#2804 - Using Imagick::annotateImage:
• Example#2805 - Imagick::appendImages example
• Example#2806 - Imagick::autoLevelImage
• Example#2807 - Imagick::blackThresholdImage
• Example#2808 - Imagick::blueShiftImage
• Example#2809 - Using Imagick::blurImage:
• Example#2810 - Imagick::borderImage
• Example#2811 - Imagick::brightnessContrastImage
• Example#2812 - Imagick::charcoalImage
• Example#2813 - Using Imagick::chopImage:
• Example#2814 - Imagick object cloning in different versions of imagick
• Example#2815 - Using Imagick::clutImage:
• Example#2816 - Imagick::colorizeImage
• Example#2817 - Imagick::colorMatrixImage
• Example#2818 - Using Imagick::commentImage:
• Example#2819 - Using Imagick::compareImageLayers
• Example#2820 - Using Imagick::compareImages:
• Example#2821 - Using Imagick::compositeImage:
• Example#2822 - Imagick::contrastImage
• Example#2823 - Imagick::convolveImage
• Example#2824 - Imagick::cropImage
• Example#2825 - Imagick::deskewImage
• Example#2826 - Imagick::despeckleImage
• Example#2827 - Using Imagick::distortImage:
• Example#2828 - Imagick::edgeImage
• Example#2829 - Imagick::embossImage
• Example#2830 - Imagick::enhanceImage
• Example#2831 - Imagick::equalizeImage
• Example#2832 - Using Imagick::evaluateImage
• Example#2833 - Using Imagick::exportImagePixels
• Example#2834 - Imagick::filter
• Example#2835 - Imagick::flipImage
• Example#2836 - Imagick::floodfillPaintImage example
• Example#2837 - Imagick::flopImage
• Example#2838 - Imagick::forwardFourierTransformImage
• Example#2839 - Imagick::frameImage
• Example#2840 - Create a sinusoidal gradient
• Example#2841 - Create a gradient from the polynomial (4x^2 - 4x + 1)
• Example#2842 - Create a complex gradient from the polynomial (4x^2 - 4x^2 + 1) modulated by a sinusoidal gradient
• Example#2843 - Imagick::fxImage
• Example#2844 - Imagick::gammaImage
• Example#2845 - Imagick::gaussianBlurImage
• Example#2846 - Using Imagick::getImageGeometry
• Example#2847 - Generates Imagick::getImageHistogram
• Example#2848 - Using Imagick::getImageLength:
• Example#2849 - Using Imagick::getImageProperties:
• Example#2850 - Using Imagick::getImageProperty:
• Example#2851 - Using Imagick::getIteratorIndex:
• Example#2852 - Imagick::getPixelIterator
• Example#2853 - Imagick::getPixelRegionIterator example
• Example#2854 - Getting the size of a raw RGB image set at 200x400, after scaling to 400x800 (compared to width / height)
• Example#2855 - Imagick::haldClutImage
• Example#2856 - Imagick::identifyFormat
• Example#2857 - Example Result Format
• Example#2858 - Imagick::implodeImage
• Example#2859 - Imagick::importImagePixels example
• Example#2860 - Imagick::levelImage
• Example#2861 - Imagick::linearStretchImage
• Example#2862 - Imagick::magnifyImage
• Example#2863 - Imagick::medianFilterImage
• Example#2864 - Imagick::mergeImageLayers
• Example#2865 - Imagick::modulateImage
• Example#2866 - Convolve Imagick::morphology
• Example#2867 - Correlate Imagick::morphology
• Example#2868 - Erode Imagick::morphology
• Example#2869 - Erode Intensity Imagick::morphology
• Example#2870 - Dilate Imagick::morphology
• Example#2871 - Dilate intensity Imagick::morphology
• Example#2872 - Distance with Chebyshev kernel Imagick::morphology
• Example#2873 - Distance with Manhattan kernel Imagick::morphology
• Example#2874 - Distance with ocatagonal kernel Imagick::morphology
• Example#2875 - Distance with Euclidean kernel Imagick::morphology
• Example#2876 - Edge Imagick::morphology
• Example#2877 - Open Imagick::morphology
• Example#2878 - Open intensity Imagick::morphology
• Example#2879 - Close Imagick::morphology
• Example#2880 - Close Intensity Imagick::morphology
• Example#2881 - Smooth Imagick::morphology
• Example#2882 - Edge in Imagick::morphology
• Example#2883 - Edge out Imagick::morphology
• Example#2884 - The 'TopHat' method, or more specifically 'White Top Hat', returns the pixels that were removed by a Opening of the shape, that is the pixels that were removed to round off the points, and the connecting bridged between shapes. Imagick::morphology
• Example#2885 - The 'BottomHat' method, also known as 'Black TopHat' is the pixels that a Closing of the shape adds to the image. That is the pixels that were used to fill in the 'holes', 'gaps', and 'bridges'. Imagick::morphology
• Example#2886 - Hit and Miss Imagick::morphology
• Example#2887 - Thinning Imagick::morphology
• Example#2888 - Thicken Imagick::morphology
• Example#2889 - Thick to generate a convex hull Imagick::morphology
• Example#2890 - Iterative morphology Imagick::morphology
• Example#2891 - Helper function to get an image silhouette Imagick::morphology
• Example#2892 - Imagick::motionBlurImage
• Example#2893 - Imagick::negateImage
• Example#2894 - Using Imagick::newImage:
• Example#2895 - Imagick::newPseudoImage
• Example#2896 - Imagick::normalizeImage
• Example#2897 - Imagick::oilPaintImage
• Example#2898 - Using Imagick::optimizeImageLayers
• Example#2899 - Imagick::orderedPosterizeImage
• Example#2900 - Using Imagick::pingImageBlob
• Example#2901 - Using Imagick::pingImageFile
• Example#2902 - A Imagick::polaroidImage example
• Example#2903 - Imagick::posterizeImage
• Example#2904 - Imagick::quantizeImage
• Example#2905 - Using Imagick::queryFontMetrics:
• Example#2906 - Imagick::queryFonts
• Example#2907 - Imagick::queryFormats
• Example#2908 - Imagick::radialBlurImage
• Example#2909 - Imagick::raiseImage
• Example#2910 - Imagick::randomThresholdImage
• Example#2911 - Imagick::readImageBlob
• Example#2912 - Imagick::recolorImage
• Example#2913 - Imagick::reduceNoiseImage
• Example#2914 - Imagick::resampleImage
• Example#2915 - Imagick::resizeImage
• Example#2916 - Imagick::rollImage
• Example#2917 - Imagick::rotateImage
• Example#2918 - Imagick::rotationalBlurImage
• Example#2919 - Using Imagick::roundCorners:
• Example#2920 - Imagick::scaleImage
• Example#2921 - Imagick::segmentImage
• Example#2922 - Imagick::selectiveBlurImage
• Example#2923 - Imagick::separateImageChannel
• Example#2924 - Imagick::sepiaToneImage
• Example#2925 - Imagick::setCompressionQuality
• Example#2926 - A Imagick::setFont example
• Example#2927 - A Imagick::setImage example
• Example#2928 - Imagick::setImageArtifact
• Example#2929 - Imagick::setImageBias
• Example#2930 - Imagick::setImageClipMask
• Example#2931 - Imagick::setImageCompressionQuality
• Example#2932 - Modify animated Gif with Imagick::setImageDelay
• Example#2933 - Basic Imagick::setImageIterations usage
• Example#2934 - A Imagick::setImageOpacity example
• Example#2935 - Imagick::setImageOrientation
• Example#2936 - Using Imagick::setImageProperty:
• Example#2937 - Imagick::setImageResolution
• Example#2938 - Modify animated Gif with Imagick::setImageTicksPerSecond
• Example#2939 - Using Imagick::setIteratorIndex:
• Example#2940 - Attempt to reach '$extent' sizeImagick::setOption
• Example#2941 - Imagick::setOption
• Example#2942 - Imagick::setOption
• Example#2943 - A Imagick::setPointSize example
• Example#2944 - Imagick::setProgressMonitor
• Example#2945 - Imagick::setSamplingFactors
• Example#2946 - Imagick::shadeImage
• Example#2947 - Imagick::shadowImage
• Example#2948 - Imagick::sharpenImage
• Example#2949 - Imagick::shaveImage
• Example#2950 - Imagick::shearImage
• Example#2951 - Create a gradient image using Imagick::sigmoidalContrastImage suitable for blending two images together smoothly, with the blending defined by $contrast and $the midpoint
• Example#2952 - Imagick::sketchImage
• Example#2953 - Imagick::smushImages
• Example#2954 - Imagick::solarizeImage
• Example#2955 - SPARSECOLORMETHOD_BARYCENTRIC Imagick::sparseColorImage
• Example#2956 - SPARSECOLORMETHOD_BILINEAR Imagick::sparseColorImage
• Example#2957 - SPARSECOLORMETHOD_SPEPARDS Imagick::sparseColorImage
• Example#2958 - SPARSECOLORMETHOD_VORONOI Imagick::sparseColorImage
• Example#2959 - SPARSECOLORMETHOD_BARYCENTRIC Imagick::sparseColorImage
• Example#2960 - createGradientImage is used by other examples. Imagick::sparseColorImage
• Example#2961 - Imagick::spliceImage
• Example#2962 - Imagick::spreadImage
• Example#2963 - Imagick::statisticImage
• Example#2964 - Imagick::subImageMatch
• Example#2965 - Imagick::swirlImage
• Example#2966 - Imagick::textureImage
• Example#2967 - Imagick::thresholdImage
• Example#2968 - Imagick::thumbnailImage
• Example#2969 - Imagick::tintImage
• Example#2970 - Using Imagick::transformImage:
• Example#2971 - Imagick::transformImageColorspace example
• Example#2972 - Imagick::transparentPaintImage
• Example#2973 - Imagick::transposeImage
• Example#2974 - Imagick::transverseImage
• Example#2975 - Using Imagick::trimImage:
• Example#2976 - Imagick::uniqueImageColors
• Example#2977 - Imagick::unsharpMaskImage
• Example#2978 - Imagick::vignetteImage
• Example#2979 - WaveImage can be quite slow Imagick::waveImage
• Example#2980 - Imagick::whiteThresholdImage
• Example#2981 - ImagickDraw::affine example
• Example#2982 - ImagickDraw::arc example
• Example#2983 - ImagickDraw::bezier example
• Example#2984 - ImagickDraw::circle example
• Example#2985 - ImagickDraw::composite example
• Example#2986 - ImagickDraw::ellipse example
• Example#2987 - ImagickDraw::line example
• Example#2988 - ImagickDraw::matte example
• Example#2989 - ImagickDraw::pathCurveToQuadraticBezierAbsolute example
• Example#2990 - ImagickDraw::pathCurveToQuadraticBezierSmoothAbsolute example
• Example#2991 - ImagickDraw::pathCurveToQuadraticBezierSmoothRelative example
• Example#2992 - ImagickDraw::pathStart example
• Example#2993 - ImagickDraw::point example
• Example#2994 - ImagickDraw::polygon example
• Example#2995 - ImagickDraw::polyline example
• Example#2996 - ImagickDraw::popDefs example
• Example#2997 - ImagickDraw::push example
• Example#2998 - ImagickDraw::pushPattern example
• Example#2999 - ImagickDraw::rectangle example
• Example#3000 - ImagickDraw::rotate example
• Example#3001 - ImagickDraw::roundRectangle example
• Example#3002 - ImagickDraw::scale example
• Example#3003 - ImagickDraw::setClipPath example
• Example#3004 - ImagickDraw::setClipRule example
• Example#3005 - ImagickDraw::setClipUnits example
• Example#3006 - ImagickDraw::setFillAlpha example
• Example#3007 - ImagickDraw::setFillColor
• Example#3008 - ImagickDraw::setFillOpacity
• Example#3009 - ImagickDraw::setFillRule example
• Example#3010 - ImagickDraw::setFont example
• Example#3011 - ImagickDraw::setFontFamily example
• Example#3012 - ImagickDraw::setFontSize example
• Example#3013 - ImagickDraw::setFontStretch example
• Example#3014 - ImagickDraw::setFontStyle example
• Example#3015 - ImagickDraw::setFontWeight example
• Example#3016 - ImagickDraw::setGravity example
• Example#3017 - ImagickDraw::setStrokeAlpha example
• Example#3018 - ImagickDraw::setStrokeAntialias example
• Example#3019 - ImagickDraw::setStrokeColor example
• Example#3020 - ImagickDraw::setStrokeDashArray example
• Example#3021 - ImagickDraw::setStrokeDashOffset example
• Example#3022 - ImagickDraw::setStrokeLineCap example
• Example#3023 - ImagickDraw::setStrokeLineJoin example
• Example#3024 - ImagickDraw::setStrokeMiterLimit example
• Example#3025 - ImagickDraw::setStrokeOpacity example
• Example#3026 - ImagickDraw::setStrokeWidth example
• Example#3027 - ImagickDraw::setTextAlignment example
• Example#3028 - ImagickDraw::setTextAntialias example
• Example#3029 - ImagickDraw::setTextDecoration example
• Example#3030 - ImagickDraw::setTextUnderColor example
• Example#3031 - ImagickDraw::setVectorGraphics example
• Example#3032 - ImagickDraw::setViewBox example
• Example#3033 - ImagickDraw::skewX example
• Example#3034 - ImagickDraw::skewY example
• Example#3035 - ImagickDraw::translate example
• Example#3036 - ImagickPixel::construct
• Example#3037 - Basic Imagick::getColor usage
• Example#3038 - Basic Imagick::getColorAsString usage
• Example#3039 - ImagickPixel getColorCount
• Example#3040 - Basic Imagick::getColorValue usage
• Example#3041 - ImagickPixel::getColorValueQuantum
• Example#3042 - Basic Imagick::getHSL example
• Example#3043 - ImagickPixel::isSimilar
• Example#3044 - ImagickPixel::setColor
• Example#3045 - Basic Imagick::setColorValue usage
• Example#3046 - ImagickPixel::setColorValueQuantum
• Example#3047 - Use ImagickPixel::setHSL to modify a color
• Example#3048 - ImagickPixelIterator::clear
• Example#3049 - ImagickPixelIterator::construct
• Example#3050 - ImagickPixelIterator::getNextIteratorRow
• Example#3051 - ImagickPixelIterator::resetIterator
• Example#3052 - ImagickPixelIterator::setIteratorRow
• Example#3053 - ImagickKernel::addKernel
• Example#3054 - ImagickKernel::addUnityKernel
• Example#3055 - ImagickKernel::addUnityKernel
• Example#3056 - ImagickKernel::fromBuiltin
• Example#3057 - ImagickKernel::fromMatrix
• Example#3058 - ImagickKernel::getMatrix
• Example#3059 - ImagickKernel::scale
• Example#3060 - ImagickKernel::separate
• Example#3061 - imap_append example
• Example#3062 - imap_check example
• Example#3063 - imap_createmailbox example
• Example#3064 - imap_delete example
• Example#3065 - imap_fetch_overview example
• Example#3066 - imap_gc example
• Example#3067 - imap_get_quota example
• Example#3068 - imap_get_quota 4.3 or greater example
• Example#3069 - imap_get_quotaroot example
• Example#3070 - imap_getacl example
• Example#3071 - imap_getmailboxes example
• Example#3072 - imap_list example
• Example#3073 - imap_mail_compose example
• Example#3074 - imap_mailboxmsginfo example
• Example#3075 - imap_mime_header_decode example
• Example#3076 - Different use of imap_open
• Example#3077 - imap_open example
• Example#3078 - imap_ping Example
• Example#3079 - imap_reopen example
• Example#3080 - imap_rfc822_parse_adrlist example
• Example#3081 - imap_rfc822_write_address example
• Example#3082 - imap_search example
• Example#3083 - imap_set_quota example
• Example#3084 - imap_setflag_full example
• Example#3085 - imap_status example
• Example#3086 - imap_thread Example
• Example#3087 - imap_timeout example
• Example#3088 - Basic imap_utf8 Usage
• Example#3089 - Calculating the hash and subscribing a user
• Example#3090 - Sending mail.
• Example#3091 - Sending mail with extra headers.
• Example#3092 - Sending mail with extra headers as array
• Example#3093 - Sending mail with an additional command line parameter.
• Example#3094 - Sending HTML email
• Example#3095 - mailparse_determine_best_xfer_encoding example
• Example#3096 - mailparse_rfc822_parse_addresses example
• Example#3097 - mailparse_stream_encode example
• Example#3098 - mailparse_uudecode_all example
• Example#3099 - bcadd example
• Example#3100 - bccomp example
• Example#3101 - bcdiv example
• Example#3102 - bcmod example
• Example#3103 - bcmod with decimals
• Example#3104 - bcmul example
• Example#3105 - bcmul scale example
• Example#3106 - bcpow example
• Example#3107 - bcpow scale example
• Example#3108 - bcscale example
• Example#3109 - bcsqrt example
• Example#3110 - bcsub example
• Example#3111 - Factorial function using GMP
• Example#3112 - gmp_abs example
• Example#3113 - gmp_add example
• Example#3114 - gmp_and example
• Example#3115 - gmp_clrbit example
• Example#3116 - gmp_cmp example
• Example#3117 - gmp_com example
• Example#3118 - gmp_div_q example
• Example#3119 - Division of GMP numbers
• Example#3120 - gmp_div_r example
• Example#3121 - gmp_divexact example
• Example#3122 - gmp_export example
• Example#3123 - gmp_fact example
• Example#3124 - gmp_gcd example
• Example#3125 - Solving a linear Diophantine equation
• Example#3126 - gmp_hamdist example
• Example#3127 - gmp_import example
• Example#3128 - Creating GMP number
• Example#3129 - gmp_intval example
• Example#3130 - gmp_invert example
• Example#3131 - gmp_jacobi example
• Example#3132 - gmp_legendre example
• Example#3133 - gmp_mod example
• Example#3134 - gmp_mul example
• Example#3135 - gmp_neg example
• Example#3136 - gmp_nextprime example
• Example#3137 - gmp_or example
• Example#3138 - gmp_perfect_square example
• Example#3139 - gmp_popcount example
• Example#3140 - gmp_pow example
• Example#3141 - gmp_powm example
• Example#3142 - gmp_prob_prime example
• Example#3143 - gmp_random_bits example
• Example#3144 - gmp_random_range example
• Example#3145 - gmp_random_seed example
• Example#3146 - gmp_random example
• Example#3147 - gmp_scan0 example
• Example#3148 - gmp_scan1 example
• Example#3149 - gmp_setbit example - 0 index
• Example#3150 - gmp_setbit example - 1 index
• Example#3151 - gmp_setbit example - clearing a bit
• Example#3152 - gmp_sign example
• Example#3153 - gmp_sqrt example
• Example#3154 - gmp_sqrtrem example
• Example#3155 - Converting a GMP number to a string
• Example#3156 - gmp_sub example
• Example#3157 - gmp_testbit example
• Example#3158 - gmp_xor example
• Example#3159 - abs example
• Example#3160 - base_convert example
• Example#3161 - bindec example
• Example#3162 - bindec interprets input as unsigned integers
• Example#3163 - ceil example
• Example#3164 - cos example
• Example#3165 - decbin example
• Example#3166 - dechex example
• Example#3167 - dechex example with large integers
• Example#3168 - decoct example
• Example#3169 - deg2rad example
• Example#3170 - exp example
• Example#3171 - Using fdiv
• Example#3172 - floor example
• Example#3173 - Using fmod
• Example#3174 - hexdec example
• Example#3175 - intdiv example
• Example#3176 - is_nan example
• Example#3177 - Example uses of max
• Example#3178 - Example uses of min
• Example#3179 - Calculate a random floating-point number
• Example#3180 - mt_rand example
• Example#3181 - mt_srand example
• Example#3182 - octdec example
• Example#3183 - pi example
• Example#3184 - Some examples of pow
• Example#3185 - rad2deg example
• Example#3186 - rand example
• Example#3187 - round examples
• Example#3188 - How precision affects a float
• Example#3189 - mode examples
• Example#3190 - mode with precision examples
• Example#3191 - sin example
• Example#3192 - sqrt example
• Example#3193 - srand example
• Example#3194 - tan example
• Example#3195 - Evaluating a FDF document
• Example#3196 - Adding JavaScript code to a FDF
• Example#3197 - Populating a PDF document
• Example#3198 - Storing an uploaded file
• Example#3199 - Detecting all fieldnames in a FDF
• Example#3200 - Accessing the form data
• Example#3201 - Accessing the form data
• Example#3202 - Retrieving FDF as a string
• Example#3203 - Passing FDF data to a second form
• Example#3204 - gnupg clearsign example (procedural)
• Example#3205 - gnupg clearsign example (OO)
• Example#3206 - keylistiterator
• Example#3207 - Procedural gnupg_adddecryptkey example
• Example#3208 - OO gnupg_adddecryptkey example
• Example#3209 - Procedural gnupg_addencryptkey example
• Example#3210 - OO gnupg_addencryptkey example
• Example#3211 - Procedural gnupg_addsignkey example
• Example#3212 - OO gnupg_addsignkey example
• Example#3213 - Procedural gnupg_cleardecryptkeys example
• Example#3214 - OO gnupg_cleardecryptkeys example
• Example#3215 - Procedural gnupg_clearencryptkeys example
• Example#3216 - OO gnupg_clearencryptkeys example
• Example#3217 - Procedural gnupg_clearsignkeys example
• Example#3218 - OO gnupg_clearsignkeys example
• Example#3219 - Procedural gnupg_decrypt example
• Example#3220 - OO gnupg_decrypt example
• Example#3221 - Procedural gnupg_decryptverify example
• Example#3222 - OO gnupg_decryptverify example
• Example#3223 - Procedural gnupg_deletekey example
• Example#3224 - OO gnupg_deletekey example
• Example#3225 - Procedural gnupg_encrypt example
• Example#3226 - OO gnupg_encrypt example
• Example#3227 - Procedural gnupg_encryptsign example
• Example#3228 - OO gnupg_encryptsign example
• Example#3229 - Procedural gnupg_export example
• Example#3230 - OO gnupg_export example
• Example#3231 - Procedural gnupg_getengineinfo example
• Example#3232 - OO gnupg_getengineinfo example
• Example#3233 - Procedural gnupg_geterror example
• Example#3234 - OO gnupg_geterror example
• Example#3235 - Procedural gnupg_geterrorinfo example
• Example#3236 - OO gnupg_geterrorinfo example
• Example#3237 - Procedural gnupg_getprotocol example
• Example#3238 - OO gnupg_getprotocol example
• Example#3239 - Procedural gnupg_gettrustlist example
• Example#3240 - OO gnupg_gettrustlist example
• Example#3241 - Procedural gnupg_import example
• Example#3242 - OO gnupg_import example
• Example#3243 - Procedural gnupg_init example with default setting
• Example#3244 - Procedural gnupg_init example with overriden file name and home dir
• Example#3245 - OO gnupg initializer example with default setting
• Example#3246 - OO gnupg initializer example with overriden file name and home dir
• Example#3247 - Procedural gnupg_keyinfo example
• Example#3248 - OO gnupg_keyinfo example
• Example#3249 - Procedural gnupg_listsignatures example
• Example#3250 - OO gnupg_listsignatures example
• Example#3251 - Procedural gnupg_setarmor example
• Example#3252 - OO gnupg_setarmor example
• Example#3253 - Procedural gnupg_seterrormode example
• Example#3254 - OO gnupg_seterrormode example
• Example#3255 - Procedural gnupg_setsignmode example
• Example#3256 - OO gnupg_setsignmode example
• Example#3257 - Procedural gnupg_sign example
• Example#3258 - OO gnupg_sign example
• Example#3259 - Procedural gnupg_verify example
• Example#3260 - OO gnupg_verify example
• Example#3261 - Creating and using a pattern
• Example#3262 - Creating and using a template
• Example#3263 - Hyphennate a text
• Example#3264 - Drawing a rectangle
• Example#3265 - Creating and using a spot color
• Example#3266 - Rotation of the coordinate system
• Example#3267 - Placing text at a given position
• Example#3268 - Drawing a dashed line
• Example#3269 - Translation of the coordinate system
• Example#3270 - A rpmdbinfo example
• Example#3271 - Searching for the package owning a file
• Example#3272 - A rpminfo example
• Example#3273 - example
• Example#3274 - example
• Example#3275 - example
• Example#3276 - example
• Example#3277 - example
• Example#3278 - example
• Example#3279 - example
• Example#3280 - example
• Example#3281 - example
• Example#3282 - example
• Example#3283 - example
• Example#3284 - example
• Example#3285 - example
• Example#3286 - example
• Example#3287 - example
• Example#3288 - example
• Example#3289 - example
• Example#3290 - example
• Example#3291 - example
• Example#3292 - Incorrect requests
• Example#3293 - Calling request from a request callback
• Example#3294 - Calling request from a request callback
• Example#3295 - Using eio with libevent
• Example#3296 - Cancelling a request
• Example#3297 - Calling eio_chmod
• Example#3298 - Making a custom request
• Example#3299 - Grouping requests
• Example#3300 - Using eio with libevent extension
• Example#3301 - Using eio with event extension
• Example#3302 - eio_cancel example
• Example#3303 - eio_custom example
• Example#3304 - eio_event_loop example
• Example#3305 - eio_lstat example
• Example#3306 - Using eio with libevent
• Example#3307 - Grouping requests
• Example#3308 - eio_grp example
• Example#3309 - eio_link example
• Example#3310 - eio_lstat example
• Example#3311 - eio_mkdir example
• Example#3312 - eio_mknod example
• Example#3313 - eio_nreqs example
• Example#3314 - eio_open example
• Example#3315 - eio_poll example
• Example#3316 - eio_read example
• Example#3317 - eio_readdir example
• Example#3318 - eio_readlink example
• Example#3319 - eio_realpath example
• Example#3320 - eio_rename example
• Example#3321 - eio_rmdir example
• Example#3322 - eio_stat example
• Example#3323 - eio_statvfs example
• Example#3324 - eio_symlink example
• Example#3325 - Simple timers
• Example#3326 - Periodic timer. Tick each 10.5 seconds
• Example#3327 - Periodic timer. Use reschedule callback
• Example#3328 - Periodic timer. Tick every 10.5 seconds starting at now
• Example#3329 - Wait until STDIN is readable
• Example#3330 - Use some async I/O to access a socket
• Example#3331 - Embedding one loop into another
• Example#3332 - Embedding loop created with kqueue backend into the default loop
• Example#3333 - Handle SIGTERM signal
• Example#3334 - Monitor changes of /var/log/messages
• Example#3335 - Monotor changes of /var/log/messages. Avoid missing updates by means of one second delay
• Example#3336 - Process status changes
• Example#3337 - Using reschedule callback
• Example#3338 - Embedding loop created with kqueue backend into the default loop
• Example#3339 - Embedding one loop into another
• Example#3340 - Embedding loop created with kqueue backend into the default loop
• Example#3341 - Embedding loop created with kqueue backend into the default loop
• Example#3342 - Periodic timer. Use reschedule callback
• Example#3343 - Periodic timer. Tick every 10.5 seconds starting at now
• Example#3344 - Hourly watcher
• Example#3345 - Handle SIGTERM signal
• Example#3346 - Monitor changes of /var/log/messages
• Example#3347 - Monitor changes of /var/log/messages
• Example#3348 - Simple timers
• Example#3349 - Monotor changes of /var/log/messages. Avoid missing updates by means of one second delay
• Example#3350 - Register an I/O watcher for some UDP socket but do not keep the event loop from running just because of that watcher.
• Example#3351 - Expect Usage Example
• Example#3352 - Another Expect Usage Example
• Example#3353 - expect_expectl example
• Example#3354 - expect_popen example
• Example#3355 - Process Control Example
• Example#3356 - pcntl_fork example
• Example#3357 - pcntl_rfork example
• Example#3358 - pcntl_signal_dispatch example
• Example#3359 - pcntl_signal_get_handler example
• Example#3360 - pcntl_signal example
• Example#3361 - pcntl_sigprocmask example
• Example#3362 - pcntl_sigwaitinfo example
• Example#3363 - posix_access example
• Example#3364 - posix_ctermid example
• Example#3365 - posix_get_last_error example
• Example#3366 - posix_getcwd example
• Example#3367 - posix_getegid example
• Example#3368 - posix_geteuid example
• Example#3369 - posix_getgid example
• Example#3370 - Example use of posix_getgrgid
• Example#3371 - Example use of posix_getgrnam
• Example#3372 - Example use of posix_getgroups
• Example#3373 - Example use of posix_getlogin
• Example#3374 - Example use of posix_getpgid
• Example#3375 - Example use of posix_getpid
• Example#3376 - Example use of posix_getppid
• Example#3377 - Example use of posix_getpwnam
• Example#3378 - Example use of posix_getpwuid
• Example#3379 - Example use of posix_getrlimit
• Example#3380 - Example use of posix_getsid
• Example#3381 - Example use of posix_getuid
• Example#3382 - A posix_mknod example
• Example#3383 - posix_setegid example
• Example#3384 - posix_setgid example
• Example#3385 - posix_setuid example
• Example#3386 - posix_strerror example
• Example#3387 - Example use of posix_times
• Example#3388 - Example use of posix_uname
• Example#3389 - escapeshellarg example
• Example#3390 - escapeshellcmd example
• Example#3391 - An exec example
• Example#3392 - Using proc_nice to set the process priority to high
• Example#3393 - A proc_open example
• Example#3394 - proc_open quirk on Windows
• Example#3395 - A shell_exec example
• Example#3396 - system example
• Example#3397 - Example showing Future as return value
• Example#3398 - Example showing Future as synchronization point
• Example#3399 - Fetch a chunk of the property table
• Example#3400 - Counting the properties of an object
• Example#3401 - Runtime inheritance
• Example#3402 - Detect the state of the referenced object
• Example#3403 - Detect the state of the referenced object
• Example#3404 - Merging into the property table of a threaded object
• Example#3405 - Notifications and Waiting
• Example#3406 - Notifications and Waiting
• Example#3407 - Popping the last item from the property table of a threaded object
• Example#3408 - Shifting the first item from the property table of a threaded object
• Example#3409 - Synchronizing
• Example#3410 - Notifications and Waiting
• Example#3411 - Return the identity of the Thread or Process that created the referenced Thread
• Example#3412 - Return the currently executing Thread
• Example#3413 - Return the identity of the currently executing Thread
• Example#3414 - Return the identity of the referenced Thread
• Example#3415 - Detect the state of the referenced Thread
• Example#3416 - Tell if the referenced Thread was started
• Example#3417 - Join with the referenced Thread
• Example#3418 - Starting Threads
• Example#3419 - A basic example of Worker::collect
• Example#3420 - A basic example of Worker::getStacked
• Example#3421 - Detect the state of a worker
• Example#3422 - Shutdown the referenced worker
• Example#3423 - Stacking a task for execution onto a worker
• Example#3424 - Removing objects from the stack of Workers
• Example#3425 - A basic example of Pool::collect
• Example#3426 - Creating Pools
• Example#3427 - Shutting down a pool
• Example#3428 - Submitting Tasks
• Example#3429 - Submitting tasks to a specific worker
• Example#3430 - New immutability semantics of Threaded
• Example#3431 - Volatile use-case
• Example#3432 - Shared Memory Operations Overview
• Example#3433 - Closing shared memory block
• Example#3434 - Deleting shared memory block
• Example#3435 - Create a new shared memory block
• Example#3436 - Reading shared memory block
• Example#3437 - Getting the size of the shared memory block
• Example#3438 - Writing to shared memory block
• Example#3439 - SyncMutex::__construct named mutex with lock timeout example
• Example#3440 - SyncMutex::__construct unnamed mutex example
• Example#3441 - SyncMutex::lock example
• Example#3442 - SyncMutex::unlock example
• Example#3443 - SyncSemaphore::__construct example
• Example#3444 - SyncSemaphore::lock example
• Example#3445 - SyncSemaphore::unlock example
• Example#3446 - SyncEvent::__construct example
• Example#3447 - SyncEvent::fire example
• Example#3448 - SyncEvent::reset example
• Example#3449 - SyncEvent::wait example
• Example#3450 - SyncReaderWriter::__construct example
• Example#3451 - SyncReaderWriter::readlock example
• Example#3452 - SyncReaderWriter::readunlock example
• Example#3453 - SyncReaderWriter::writelock example
• Example#3454 - SyncReaderWriter::writeunlock example
• Example#3455 - SyncSharedMemory::__construct example
• Example#3456 - SyncSharedMemory::first example
• Example#3457 - SyncSharedMemory::__construct example
• Example#3458 - SyncSharedMemory::size example
• Example#3459 - SyncSharedMemory::write example
• Example#3460 - A geoip_asnum_by_name example
• Example#3461 - A geoip_continent_code_by_name example
• Example#3462 - A geoip_country_code_by_name example
• Example#3463 - A geoip_country_code3_by_name example
• Example#3464 - A geoip_country_name_by_name example
• Example#3465 - A geoip_database_info example
• Example#3466 - A geoip_db_avail example
• Example#3467 - A geoip_db_filename example
• Example#3468 - A geoip_db_get_all_info example
• Example#3469 - A geoip_db_get_all_info example
• Example#3470 - A geoip_domain_by_name example
• Example#3471 - A geoip_id_by_name example
• Example#3472 - A geoip_isp_by_name example
• Example#3473 - A geoip_netspeedcell_by_name example
• Example#3474 - A geoip_org_by_name example
• Example#3475 - A geoip_record_by_name example
• Example#3476 - A geoip_region_by_name example
• Example#3477 - A geoip_region_name_by_code example using region code for US/Canada
• Example#3478 - A geoip_region_name_by_code example using FIPS codes
• Example#3479 - A geoip_setup_custom_directory example
• Example#3480 - A geoip_time_zone_by_country_and_region example using region code for US/Canada
• Example#3481 - A geoip_time_zone_by_country_and_region example using FIPS codes
• Example#3482 - xor.data file
• Example#3483 - Simple train
• Example#3484 - Simple test
• Example#3485 - fann_create_train_from_callback example
• Example#3486 - fann_read_train_from_file example
• Example#3487 - igbinary_serialize example
• Example#3488 - JsonSerializable::jsonSerialize example returning an array
• Example#3489 - JsonSerializable::jsonSerialize example returning an associative array
• Example#3490 - JsonSerializable::jsonSerialize example returning an int
• Example#3491 - JsonSerializable::jsonSerialize example returning a string
• Example#3492 - json_decode examples
• Example#3493 - Accessing invalid object properties
• Example#3494 - common mistakes using json_decode
• Example#3495 - depth errors
• Example#3496 - json_decode of large integers
• Example#3497 - A json_encode example
• Example#3498 - A json_encode example showing some flags in use
• Example#3499 - JSON_NUMERIC_CHECK option example
• Example#3500 - Sequential versus non-sequential array example
• Example#3501 - JSON_PRESERVE_ZERO_FRACTION option example
• Example#3502 - json_last_error example
• Example#3503 - json_last_error with json_encode
• Example#3504 - json_last_error and JSON_THROW_ON_ERROR
• Example#3505 - Lua::assignexample
• Example#3506 - Lua::callexample
• Example#3507 - Lua::evalexample
• Example#3508 - Lua::registerCallbackexample
• Example#3509 - LuaClosure::__invokeexample
• Example#3510 - Execute some Lua code
• Example#3511 - Calling a Lua function
• Example#3512 - Profiling Lua code
• Example#3513 - Loading code into Lua
• Example#3514 - Manipulating the usage timer
• Example#3515 - Registering PHP functions to call from Lua
• Example#3516 - Calling a Lua function
• Example#3517 - Calling a Lua function
• Example#3518 - constant example
• Example#3519 - Defining Constants
• Example#3520 - Constants with Reserved Names
• Example#3521 - Checking Constants
• Example#3522 - eval example - simple text merge
• Example#3523 - exit example
• Example#3524 - exit status example
• Example#3525 - Shutdown functions and destructors run regardless
• Example#3526 - Listing all information about the users browser
• Example#3527 - A __halt_compiler example
• Example#3528 - highlight_string example
• Example#3529 - hrtime usage
• Example#3530 - A ignore_user_abort example
• Example#3531 - pack example
• Example#3532 - php_strip_whitespace example
• Example#3533 - Basic sapi_windows_generate_ctrl_event Usage
• Example#3534 - Basic sapi_windows_set_ctrl_handler Usage
• Example#3535 - sapi_windows_vt100_support default state
• Example#3536 - sapi_windows_vt100_support changing state
• Example#3537 - Example usage of VT100 support enabled
• Example#3538 - sleep example
• Example#3539 - A sys_getloadavg example
• Example#3540 - time_nanosleep example
• Example#3541 - A time_sleep_until example
• Example#3542 - uniqid Example
• Example#3543 - unpack example
• Example#3544 - unpack example with a repeater
• Example#3545 - unpack example with unnamed keys
• Example#3546 - usleep example
• Example#3547 - Get and set base path
• Example#3548 - Get and set logger
• Example#3549 - Fast write log
• Example#3550 - Fast count some type of log count value
• Example#3551 - Acquisit some type of log list
• Example#3552 - seaslog_get_author example
• Example#3553 - seaslog_get_version example
• Example#3554 - SeasLog::alert example
• Example#3555 - SeasLog::analyzerCount example
• Example#3556 - SeasLog::analyzerDetail example
• Example#3557 - SeasLog::closeLoggerStream example
• Example#3558 - SeasLog::__construct example
• Example#3559 - SeasLog::critical example
• Example#3560 - SeasLog::debug example
• Example#3561 - SeasLog::__destruct example
• Example#3562 - SeasLog::emergency example
• Example#3563 - SeasLog::error example
• Example#3564 - SeasLog::flushBuffer example
• Example#3565 - SeasLog::getBasePath example
• Example#3566 - SeasLog::getBuffer example
• Example#3567 - SeasLog::getBufferEnabled example
• Example#3568 - SeasLog::getDatetimeFormat example
• Example#3569 - SeasLog::getLastLogger example
• Example#3570 - SeasLog::getRequestID example
• Example#3571 - SeasLog::getRequestVariable example
• Example#3572 - SeasLog::info example
• Example#3573 - SeasLog::log example
• Example#3574 - SeasLog::notice example
• Example#3575 - SeasLog::setBasePath example
• Example#3576 - SeasLog::setDatetimeFormat example
• Example#3577 - SeasLog::setLogger example
• Example#3578 - SeasLog::setRequestID example
• Example#3579 - SeasLog::setRequestVariable example
• Example#3580 - SeasLog::warning example
• Example#3581 - SplStack::__construct example
• Example#3582 - SplQueue::__construct example
• Example#3583 - Efficiently handling tasks with SplQueue
• Example#3584 - SplFixedArray usage example
• Example#3585 - SplFixedArray::__construct example
• Example#3586 - SplFixedArray::count example
• Example#3587 - SplFixedArray::fromArray example
• Example#3588 - SplFixedArray::getSize example
• Example#3589 - SplFixedArray::setSize example
• Example#3590 - SplFixedArray::toArray example
• Example#3591 - SplObjectStorage as a set
• Example#3592 - SplObjectStorage as a map
• Example#3593 - SplObjectStorage::addAll example
• Example#3594 - SplObjectStorage::attach example
• Example#3595 - SplObjectStorage::contains example
• Example#3596 - SplObjectStorage::count example
• Example#3597 - SplObjectStorage::current example
• Example#3598 - SplObjectStorage::detach example
• Example#3599 - SplObjectStorage::getHash example
• Example#3600 - SplObjectStorage::getInfo example
• Example#3601 - SplObjectStorage::key example
• Example#3602 - SplObjectStorage::next example
• Example#3603 - SplObjectStorage::offsetExists example
• Example#3604 - SplObjectStorage::offsetGet example
• Example#3605 - SplObjectStorage::offsetSet example
• Example#3606 - SplObjectStorage::offsetUnset example
• Example#3607 - SplObjectStorage::removeAll example
• Example#3608 - SplObjectStorage::removeAllExcept example
• Example#3609 - SplObjectStorage::rewind example
• Example#3610 - SplObjectStorage::serialize example
• Example#3611 - SplObjectStorage::setInfo example
• Example#3612 - SplObjectStorage::unserialize example
• Example#3613 - SplObjectStorage::valid example
• Example#3614 - AppendIterator::append example
• Example#3615 - Iterating AppendIterator with foreach
• Example#3616 - Iterating AppendIterator with the AppendIterator API
• Example#3617 - AppendIterator::getInnerIterator example
• Example#3618 - AppendIterator.getIteratorIndex basic example
• Example#3619 - AppendIterator::key basic example
• Example#3620 - ArrayIterator::current example
• Example#3621 - ArrayIterator::key example
• Example#3622 - ArrayIterator::next example
• Example#3623 - ArrayIterator::rewind example
• Example#3624 - ArrayIterator::valid example
• Example#3625 - CachingIterator::getCache example
• Example#3626 - Available callback arguments
• Example#3627 - Callback basic examples
• Example#3628 - A DirectoryIterator::__construct example
• Example#3629 - A DirectoryIterator::current example
• Example#3630 - A DirectoryIterator::getATime example
• Example#3631 - A DirectoryIterator::getBasename example
• Example#3632 - DirectoryIterator::getCTime example
• Example#3633 - DirectoryIterator::getExtension example
• Example#3634 -
• Example#3635 - A DirectoryIterator::getFilename example
• Example#3636 - DirectoryIterator::getGroup example
• Example#3637 - DirectoryIterator::getInode example
• Example#3638 - A DirectoryIterator::getMTime example
• Example#3639 - DirectoryIterator::getOwner example
• Example#3640 - DirectoryIterator::getPath example
• Example#3641 - DirectoryIterator::getPathname example
• Example#3642 - DirectoryIterator::getPerms example
• Example#3643 - DirectoryIterator::getSize example
• Example#3644 - DirectoryIterator::getType example
• Example#3645 - DirectoryIterator::isDir example
• Example#3646 - A DirectoryIterator::isDot example
• Example#3647 - DirectoryIterator::isExecutable example
• Example#3648 - DirectoryIterator::isFile example
• Example#3649 - A DirectoryIterator::isLink example
• Example#3650 - DirectoryIterator::isReadable example
• Example#3651 - DirectoryIterator::isWritable example
• Example#3652 - A DirectoryIterator::key example
• Example#3653 - DirectoryIterator::next example
• Example#3654 - DirectoryIterator::rewind example
• Example#3655 - DirectoryIterator::seek example
• Example#3656 - A DirectoryIterator::__toString example
• Example#3657 - A DirectoryIterator::valid example
• Example#3658 - FilesystemIterator::__construct example
• Example#3659 - FilesystemIterator::current example
• Example#3660 - FilesystemIterator::key example
• Example#3661 - FilesystemIterator::next example
• Example#3662 - FilesystemIterator::rewind example
• Example#3663 - FilesystemIterator::key example
• Example#3664 - FilterIterator::accept example
• Example#3665 - GlobIterator example
• Example#3666 - GlobIterator::count example
• Example#3667 - InfiniteIterator::__construct example
• Example#3668 - LimitIterator usage example
• Example#3669 - LimitIterator::__construct example
• Example#3670 - LimitIterator::getPosition example
• Example#3671 - Iterating a MultipleIterator
• Example#3672 - NoRewindIterator::__construct example
• Example#3673 - NoRewindIterator::rewind example
• Example#3674 - RecursiveArrayIterator::getChildren example
• Example#3675 - RecursiveArrayIterator::hasChildren example
• Example#3676 - Available callback arguments
• Example#3677 - Recursive callback basic example
• Example#3678 - RecursiveCallbackFilterIterator::hasChildren basic usage
• Example#3679 - RecursiveDirectoryIterator example
• Example#3680 - getSubPath example
• Example#3681 - getSubPathname example
• Example#3682 - Basic RecursiveFilterIterator example
• Example#3683 - RecursiveFilterIterator example
• Example#3684 - Iterating a RecursiveIteratorIterator
• Example#3685 - RecursiveRegexIterator::__construct example
• Example#3686 - RecursiveRegexIterator::getChildren example
• Example#3687 - RecursiveRegexIterator::hasChildren example
• Example#3688 - RegexIterator::accept example
• Example#3689 - RegexIterator::__construct example
• Example#3690 - RegexIterator::getFlags example
• Example#3691 - RegexIterator::getMode example
• Example#3692 - RegexIterator::getPregFlags example
• Example#3693 - RegexIterator::setFlags example
• Example#3694 - RegexIterator::setMode example
• Example#3695 - RegexIterator::setPregFlags example
• Example#3696 - Countable::count example
• Example#3697 - Basic usage
• Example#3698 - SeekableIterator::seek example
• Example#3699 - class_implements example
• Example#3700 - class_parents example
• Example#3701 - class_uses example
• Example#3702 - iterator_apply example
• Example#3703 - iterator_count example
• Example#3704 - iterator_count modifies position
• Example#3705 - iterator_count in foreach loops
• Example#3706 - iterator_to_array example
• Example#3707 - spl_autoload_extensions example
• Example#3708 - spl_autoload_register as a replacement for an __autoload function
• Example#3709 - spl_autoload_register example where the class is not loaded
• Example#3710 - spl_classes example
• Example#3711 - A spl_object_hash example
• Example#3712 - A spl_object_id example
• Example#3713 - SplFileInfo::__construct example
• Example#3714 - SplFileInfo::getBasename example
• Example#3715 - SplFileInfo::getCTime example
• Example#3716 - SplFileInfo::getExtension example
• Example#3717 -
• Example#3718 - SplFileInfo::getFilename example
• Example#3719 - SplFileInfo::getGroup example
• Example#3720 - SplFileInfo::getLinkTarget example
• Example#3721 - SplFileInfo::getOwner example
• Example#3722 - SplFileInfo::getPath example
• Example#3723 - SplFileInfo::getPathInfo example
• Example#3724 - SplFileInfo::getPathname example
• Example#3725 - SplFileInfo::getPerms example
• Example#3726 - SplFileInfo::getRealPath example
• Example#3727 - SplFileInfo::getType example
• Example#3728 - SplFileInfo::isDir example
• Example#3729 - SplFileInfo::isExecutable example
• Example#3730 - SplFileInfo::isFile example
• Example#3731 - SplFileInfo::isLink example
• Example#3732 - SplFileInfo::isReadable example
• Example#3733 - SplFileInfo::openFile example
• Example#3734 - SplFileInfo::setFileClass example
• Example#3735 - SplFileInfo::setFileClass example
• Example#3736 - SplFileInfo::__toString example
• Example#3737 - SplFileObject::__construct example
• Example#3738 - SplFileObject::current example
• Example#3739 - SplFileObject::eof example
• Example#3740 - SplFileObject::fflush example
• Example#3741 - SplFileObject::fgetc example
• Example#3742 - SplFileObject::fgetcsv example
• Example#3743 - SplFileObject::READ_CSV example
• Example#3744 - SplFileObject::fgets example
• Example#3745 - SplFileObject::fgetss example
• Example#3746 - SplFileObject::flock example
• Example#3747 - SplFileObject::fpassthru example
• Example#3748 - SplFileObject::fputcsv example
• Example#3749 - SplFileObject::fread example
• Example#3750 - SplFileObject::fscanf example
• Example#3751 - SplFileObject::fseek example
• Example#3752 - SplFileObject::fstat example
• Example#3753 - SplFileObject::ftell example
• Example#3754 - SplFileObject::ftruncate example
• Example#3755 - SplFileObject::fwrite example
• Example#3756 - SplFileObject::getCsvControl example
• Example#3757 - SplFileObject::getFlags example
• Example#3758 - SplFileObject::getMaxLineLen example
• Example#3759 - SplFileObject::key example
• Example#3760 - SplFileObject::key example with SplFileObject::setMaxLineLen
• Example#3761 - SplFileObject::next example
• Example#3762 - SplFileObject::rewind example
• Example#3763 - SplFileObject::seek example
• Example#3764 - SplFileObject::setCsvControl example
• Example#3765 - SplFileObject::setFlags example
• Example#3766 - SplFileObject::setMaxLineLen example
• Example#3767 - SplFileObject::valid example
• Example#3768 - SplTempFileObject example
• Example#3769 - ArrayObject::append example
• Example#3770 - ArrayObject::asort example
• Example#3771 - ArrayObject::__construct example
• Example#3772 - ArrayObject::count example
• Example#3773 - ArrayObject::exchangeArray example
• Example#3774 - ArrayObject::getArrayCopy example
• Example#3775 - ArrayObject::getFlags example
• Example#3776 - ArrayObject::getIterator example
• Example#3777 - ArrayObject::getIteratorClass example
• Example#3778 - ArrayObject::ksort example
• Example#3779 - ArrayObject::natcasesort example
• Example#3780 - ArrayObject::natsort example
• Example#3781 - ArrayObject::offsetExists example
• Example#3782 - ArrayObject::offsetGet example
• Example#3783 - ArrayObject::offsetSet example
• Example#3784 - ArrayObject::offsetUnset example
• Example#3785 - ArrayObject::serialize example
• Example#3786 - ArrayObject::setFlags example
• Example#3787 - ArrayObject::setIteratorClass example
• Example#3788 - ArrayObject::uasort example
• Example#3789 - ArrayObject::uksort example
• Example#3790 - Using file_get_contents to retrieve data from multiple sources
• Example#3791 - Making a POST request to an https server
• Example#3792 - Writing data to a compressed file
• Example#3793 - A Stream for reading/writing global variables
• Example#3794 - Listing files from tar archives
• Example#3795 - stream_bucket_prepend examples
• Example#3796 - Using stream_context_create
• Example#3797 - Using stream_context_get_default
• Example#3798 - stream_context_get_options example
• Example#3799 - stream_context_get_params example
• Example#3800 - stream_context_set_default example
• Example#3801 - A stream_copy_to_stream example
• Example#3802 - Controlling where filters are applied
• Example#3803 - Filter for capitalizing characters on foo-bar.txt stream
• Example#3804 - Registering a generic filter class to match multiple filter names.
• Example#3805 - Dynamically refiltering a stream
• Example#3806 - stream_get_contents example
• Example#3807 - Using stream_get_filters
• Example#3808 - stream_get_meta_data example using fopen with http
• Example#3809 - stream_get_meta_data example using stream_socket_client with https
• Example#3810 - Using stream_get_transports
• Example#3811 - stream_get_wrappers example
• Example#3812 - Checking for the existence of a stream wrapper
• Example#3813 - stream_is_local example
• Example#3814 - stream_isatty example
• Example#3815 - stream_notification_callback example
• Example#3816 - Simple progressbar for commandline download client
• Example#3817 - stream_resolve_include_path example
• Example#3818 - stream_select Example
• Example#3819 - stream_set_timeout example
• Example#3820 - stream_set_write_buffer example
• Example#3821 - stream_socket_client example
• Example#3822 - Using UDP connection
• Example#3823 - stream_socket_enable_crypto example
• Example#3824 - A stream_socket_pair example
• Example#3825 - stream_socket_recvfrom example
• Example#3826 - stream_socket_sendto Example
• Example#3827 - Using TCP server sockets
• Example#3828 - Using UDP server sockets
• Example#3829 - A stream_socket_shutdown example
• Example#3830 - How to register a stream wrapper
• Example#3831 - Basic Tidy usage
• Example#3832 - tidy::getBody example
• Example#3833 - tidy::cleanrepair example
• Example#3834 - tidy::__construct example
• Example#3835 - tidy::diagnose example
• Example#3836 - tidy_get_error_buffer example
• Example#3837 - tidy::getConfig example
• Example#3838 - tidy_getopt example
• Example#3839 - Print all options along with their documentation and default value
• Example#3840 - tidy::getStatus example
• Example#3841 - tidy::head example
• Example#3842 - tidy::html example
• Example#3843 - tidy::parseFile example
• Example#3844 - tidy::parseString example
• Example#3845 - tidy::repairFile example
• Example#3846 - tidy::repairString example
• Example#3847 - tidy::root example
• Example#3848 - tidyNode::hasChildren example
• Example#3849 - tidyNode::hasChildren example
• Example#3850 - tidyNode::hasSiblings example
• Example#3851 - Extract ASP code from a mixed HTML document
• Example#3852 - Extract comments from a mixed HTML document
• Example#3853 - Extract HTML code from a mixed HTML document
• Example#3854 - Extract JSTE code from a mixed HTML document
• Example#3855 - Extract PHP code from a mixed HTML document
• Example#3856 - Extract text from a mixed HTML document
• Example#3857 - ob_tidyhandler example
• Example#3858 - tidy_access_count example
• Example#3859 - tidy_config_count example
• Example#3860 - tidy_error_count example
• Example#3861 - tidy_get_output example
• Example#3862 - tidy_warning_count example
• Example#3863 - Strip comments with the tokenizer
• Example#3864 - PhpToken::getTokenName example
• Example#3865 - PhpToken::is example
• Example#3866 - Usage with array
• Example#3867 - PhpToken::isIgnorable example
• Example#3868 - PhpToken::__toString example
• Example#3869 - PhpToken::tokenize example
• Example#3870 - Extending PhpToken
• Example#3871 - token_get_all example
• Example#3872 - token_get_all incorrect usage example
• Example#3873 - token_get_all on a class using a reserved word example
• Example#3874 - token_name example
• Example#3875 - base64_decode example
• Example#3876 - base64_encode example
• Example#3877 - get_headers example
• Example#3878 - get_headers using HEAD example
• Example#3879 - What get_meta_tags parses
• Example#3880 - What get_meta_tags returns
• Example#3881 - Simple usage of http_build_query
• Example#3882 - http_build_query with numerically index elements.
• Example#3883 - http_build_query with complex arrays
• Example#3884 - Using http_build_query with an object
• Example#3885 - A parse_url example
• Example#3886 - A parse_url example with missing scheme
• Example#3887 - rawurldecode example
• Example#3888 - including a password in an FTP URL
• Example#3889 - rawurlencode example 2
• Example#3890 - urldecode example
• Example#3891 - urlencode example
• Example#3892 - urlencode and htmlentities example
• Example#3893 - Basic Javascript execution
• Example#3894 - Yaml Example
• Example#3895 - Parse callback example
• Example#3896 - Emit callback example
• Example#3897 - yaml_emit example
• Example#3898 - yaml_parse example
• Example#3899 - A classic Application directory layout
• Example#3900 - Entry
• Example#3901 - Rewrite rule
• Example#3902 - Application config
• Example#3903 - Default controller
• Example#3904 - Default view template
• Example#3905 - Run the Application
• Example#3906 - An PHP array example
• Example#3907 - An ini file example
• Example#3908 - A Bootstrapexample
• Example#3909 - Yaf_Application::bootstrapexample
• Example#3910 - Yaf_Application::clearLastErrorexample
• Example#3911 - A ini config file example
• Example#3912 - Yaf_Application::__constructexample
• Example#3913 - Yaf_Application::__constructexample
• Example#3914 - Yaf_Application::environexample
• Example#3915 - Yaf_Application::executeexample
• Example#3916 - Yaf_Application::getConfigexample
• Example#3917 - Yaf_Application::getDispatcherexample
• Example#3918 - Yaf_Application::getLastErrorMsgexample
• Example#3919 - Yaf_Application::getLastErrorNoexample
• Example#3920 - Yaf_Application::getModulesexample
• Example#3921 - Bootstrap example
• Example#3922 - Yaf_Dispatcher::autoRender example
• Example#3923 - Yaf_Dispatcher::catchException example
• Example#3924 - Yaf_Dispatcher::registerPlugin example
• Example#3925 - A custom View engine example
• Example#3926 - Yaf_Dispatcher::setView example
• Example#3927 - Yaf_Dispatcher::throwexception example
• Example#3928 - Yaf_Dispatcher::throwexceptionexample
• Example#3929 - Yaf_Config_Iniexample
• Example#3930 - define action in a separate file
• Example#3931 - Dummy_action.php
• Example#3932 - Yaf_Controller_Abstract::forwardexample
• Example#3933 - Yaf_Action_Abstract::executeexample
• Example#3934 - Yaf_Action_Abstract::executeexample
• Example#3935 - Yaf_View_Simple::assignexample
• Example#3936 - templateexample
• Example#3937 - Yaf_View_Simple::assignRefexample
• Example#3938 - templateexample
• Example#3939 - Yaf_View_Simple::clearexample
• Example#3940 - Yaf_View_Simple::__constructorexample
• Example#3941 - Yaf_View_Simple::__setexample
• Example#3942 - Config example
• Example#3943 - Register localnamespace
• Example#3944 - Load class example
• Example#3945 - Load namespace class example
• Example#3946 - MVC class loading example
• Example#3947 - MVC class distinctions
• Example#3948 - MVC loading example
• Example#3949 - Yaf_Loader::registerNamespaceexample
• Example#3950 - Yaf_Loader::registerLocalNamespaceexample
• Example#3951 - Yaf_Loader::registerNamespaceexample
• Example#3952 - Plugin example
• Example#3953 - Yaf_Plugin_Abstract::routerShutdownexample
• Example#3954 - Yaf_Response_Abstract::appendBodyexample
• Example#3955 - Yaf_Response_Abstract::getBodyexample
• Example#3956 - Yaf_Response_Abstract::prependBodyexample
• Example#3957 - Yaf_Response_Abstract::responseexample
• Example#3958 - Yaf_Response_Abstract::setBodyexample
• Example#3959 - Yaf_Route_Map::assembleexample
• Example#3960 - Yaf_Route_Mapexample
• Example#3961 - Yaf_Route_Mapexample
• Example#3962 - Yaf_Route_Mapexample
• Example#3963 - Yaf_Route_Regex::assembleexample
• Example#3964 - Yaf_Route_Regexexample
• Example#3965 - Yaf_Route_Regex(as of 2.3.0)example
• Example#3966 - Yaf_Route_Regex and named capture ground(as of 2.3.0)example
• Example#3967 - Yaf_Route_Regexexample
• Example#3968 - Yaf_Route_Rewrite::assembleexample
• Example#3969 - Yaf_Route_Rewriteexample
• Example#3970 - Yaf_Route_Rewriteexample
• Example#3971 - Yaf_Route_Rewrite(as of 2.3.0)example
• Example#3972 - Rewrite rule for Apache
• Example#3973 - Rewrite rule for Apache
• Example#3974 - Rewrite rule for Lighttpd
• Example#3975 - Rewrite rule for Nginx
• Example#3976 - Yaf_Route_Static(default route)example
• Example#3977 - application.iniexample
• Example#3978 - Yaf_Dispatcher::autoConfigexample
• Example#3979 - Yaf_Dispatcher::autoRenderexample
• Example#3980 - Register some routes in Bootstrap
• Example#3981 - plugin Dummy.php (under application.directory/plugins)
• Example#3982 - Yaf_Route_Simple::assembleexample
• Example#3983 - Yaf_Route_Simple::routeexample
• Example#3984 - Yaf_Route_Simple::routeexample
• Example#3985 - Yaf_Route_Static::assembleexample
• Example#3986 - Yaf_Route_Static::routeexample
• Example#3987 - Yaf_Route_Supervar::assemble example
• Example#3988 - Yaf_Route_Supervarexample
• Example#3989 - INI example
• Example#3990 - INI sections example
• Example#3991 - INIexample
• Example#3992 - Taintexample
• Example#3993 - Vector
• Example#3994 - Map
• Example#3995 - Ds\Collection::clear example
• Example#3996 - Ds\Collection::copy example
• Example#3997 - Ds\Collection::isEmpty example
• Example#3998 - Ds\Collection::toArray example
• Example#3999 - Ds\Hashable::hash example
• Example#4000 - Ds\Sequence::allocate example
• Example#4001 - Ds\Sequence::apply example
• Example#4002 - Ds\Sequence::capacity example
• Example#4003 - Ds\Sequence::contains example
• Example#4004 - Ds\Sequence::filter example using callback function
• Example#4005 - Ds\Sequence::filter example without a callback function
• Example#4006 - Ds\Sequence::find example
• Example#4007 - Ds\Sequence::first example
• Example#4008 - Ds\Sequence::get example
• Example#4009 - Ds\Sequence::get example using array syntax
• Example#4010 - Ds\Sequence::insert example
• Example#4011 - Ds\Sequence::join example using a separator string
• Example#4012 - Ds\Sequence::join example without a separator string
• Example#4013 - Ds\Sequence::last example
• Example#4014 - Ds\Sequence::map example
• Example#4015 - Ds\Sequence::merge example
• Example#4016 - Ds\Sequence::pop example
• Example#4017 - Ds\Sequence::push example
• Example#4018 - Ds\Sequence::reduce with initial value example
• Example#4019 - Ds\Sequence::reduce without an initial value example
• Example#4020 - Ds\Sequence::remove example
• Example#4021 - Ds\Sequence::reverse example
• Example#4022 - Ds\Sequence::reversed example
• Example#4023 - Ds\Sequence::rotate example
• Example#4024 - Ds\Sequence::set example
• Example#4025 - Ds\Sequence::set example using array syntax
• Example#4026 - Ds\Sequence::shift example
• Example#4027 - Ds\Sequence::slice example
• Example#4028 - Ds\Sequence::sort example
• Example#4029 - Ds\Sequence::sort example using a comparator
• Example#4030 - Ds\Sequence::sorted example
• Example#4031 - Ds\Sequence::sorted example using a comparator
• Example#4032 - Ds\Sequence::sum integer example
• Example#4033 - Ds\Sequence::sum float example
• Example#4034 - Ds\Sequence::unshift example
• Example#4035 - Ds\Vector::allocate example
• Example#4036 - Ds\Vector::apply example
• Example#4037 - Ds\Vector::capacity example
• Example#4038 - Ds\Vector::clear example
• Example#4039 - Ds\Vector::__construct example
• Example#4040 - Ds\Vector::contains example
• Example#4041 - Ds\Vector::copy example
• Example#4042 - Ds\Vector::filter example using callback function
• Example#4043 - Ds\Vector::filter example without a callback function
• Example#4044 - Ds\Vector::find example
• Example#4045 - Ds\Vector::first example
• Example#4046 - Ds\Vector::get example
• Example#4047 - Ds\Vector::get example using array syntax
• Example#4048 - Ds\Vector::insert example
• Example#4049 - Ds\Vector::isEmpty example
• Example#4050 - Ds\Vector::join example using a separator string
• Example#4051 - Ds\Vector::join example without a separator string
• Example#4052 - Ds\Vector::last example
• Example#4053 - Ds\Vector::map example
• Example#4054 - Ds\Vector::merge example
• Example#4055 - Ds\Vector::pop example
• Example#4056 - Ds\Vector::push example
• Example#4057 - Ds\Vector::reduce with initial value example
• Example#4058 - Ds\Vector::reduce without an initial value example
• Example#4059 - Ds\Vector::remove example
• Example#4060 - Ds\Vector::reverse example
• Example#4061 - Ds\Vector::reversed example
• Example#4062 - Ds\Vector::rotate example
• Example#4063 - Ds\Vector::set example
• Example#4064 - Ds\Vector::set example using array syntax
• Example#4065 - Ds\Vector::shift example
• Example#4066 - Ds\Vector::slice example
• Example#4067 - Ds\Vector::sort example
• Example#4068 - Ds\Vector::sort example using a comparator
• Example#4069 - Ds\Vector::sorted example
• Example#4070 - Ds\Vector::sorted example using a comparator
• Example#4071 - Ds\Vector::sum integer example
• Example#4072 - Ds\Vector::sum float example
• Example#4073 - Ds\Vector::toArray example
• Example#4074 - Ds\Vector::unshift example
• Example#4075 - Ds\Deque::allocate example
• Example#4076 - Ds\Deque::apply example
• Example#4077 - Ds\Deque::capacity example
• Example#4078 - Ds\Deque::clear example
• Example#4079 - Ds\Deque::__construct example
• Example#4080 - Ds\Deque::contains example
• Example#4081 - Ds\Deque::copy example
• Example#4082 - Ds\Deque::filter example using callback function
• Example#4083 - Ds\Deque::filter example without a callback function
• Example#4084 - Ds\Deque::find example
• Example#4085 - Ds\Deque::first example
• Example#4086 - Ds\Deque::get example
• Example#4087 - Ds\Deque::get example using array syntax
• Example#4088 - Ds\Deque::insert example
• Example#4089 - Ds\Deque::isEmpty example
• Example#4090 - Ds\Deque::join example using a separator string
• Example#4091 - Ds\Deque::join example without a separator string
• Example#4092 - Ds\Deque::last example
• Example#4093 - Ds\Deque::map example
• Example#4094 - Ds\Deque::merge example
• Example#4095 - Ds\Deque::pop example
• Example#4096 - Ds\Deque::push example
• Example#4097 - Ds\Deque::reduce with initial value example
• Example#4098 - Ds\Deque::reduce without an initial value example
• Example#4099 - Ds\Deque::remove example
• Example#4100 - Ds\Deque::reverse example
• Example#4101 - Ds\Deque::reversed example
• Example#4102 - Ds\Deque::rotate example
• Example#4103 - Ds\Deque::set example
• Example#4104 - Ds\Deque::set example using array syntax
• Example#4105 - Ds\Deque::shift example
• Example#4106 - Ds\Deque::slice example
• Example#4107 - Ds\Deque::sort example
• Example#4108 - Ds\Deque::sort example using a comparator
• Example#4109 - Ds\Deque::sorted example
• Example#4110 - Ds\Deque::sorted example using a comparator
• Example#4111 - Ds\Deque::sum integer example
• Example#4112 - Ds\Deque::sum float example
• Example#4113 - Ds\Deque::toArray example
• Example#4114 - Ds\Deque::unshift example
• Example#4115 - Ds\Map::allocate example
• Example#4116 - Ds\Map::apply example
• Example#4117 - Ds\Map::capacity example
• Example#4118 - Ds\Map::clear example
• Example#4119 - Ds\Map::__construct example
• Example#4120 - Ds\Map::copy example
• Example#4121 - Ds\Map::diff example
• Example#4122 - Ds\Map::filter example using callback function
• Example#4123 - Ds\Map::filter example without a callback function
• Example#4124 - Ds\Map::first example
• Example#4125 - Ds\Map::get example
• Example#4126 - Ds\Map::get example using array syntax
• Example#4127 - Ds\Map::hasKey example
• Example#4128 - Ds\Map::hasValue example
• Example#4129 - Ds\Map::intersect example
• Example#4130 - Ds\Map::isEmpty example
• Example#4131 - Ds\Map::keys example
• Example#4132 - Ds\Map::ksort example
• Example#4133 - Ds\Map::ksort example using a comparator
• Example#4134 - Ds\Map::ksorted example
• Example#4135 - Ds\Map::ksorted example using a comparator
• Example#4136 - Ds\Map::last example
• Example#4137 - Ds\Map::map example
• Example#4138 - Ds\Map::merge example
• Example#4139 - Ds\Map::pairs example
• Example#4140 - Ds\Map::put example
• Example#4141 - Ds\Map::put example using objects as keys
• Example#4142 - Ds\Map::putAll example
• Example#4143 - Ds\Map::reduce with initial value example
• Example#4144 - Ds\Map::reduce without an initial value example
• Example#4145 - Ds\Map::remove example
• Example#4146 - Ds\Map::reverse example
• Example#4147 - Ds\Map::reversed example
• Example#4148 - Ds\Map::skip example
• Example#4149 - Ds\Map::slice example
• Example#4150 - Ds\Map::sort example
• Example#4151 - Ds\Map::sort example using a comparator
• Example#4152 - Ds\Map::sort example
• Example#4153 - Ds\Map::sort example using a comparator
• Example#4154 - Ds\Map::sum integer example
• Example#4155 - Ds\Map::sum float example
• Example#4156 - Ds\Map::toArray example
• Example#4157 - Ds\Map::union example
• Example#4158 - Ds\Map::values example
• Example#4159 - Ds\Map::xor example
• Example#4160 - Ds\Pair::clear example
• Example#4161 - Ds\Pair::copy example
• Example#4162 - Ds\Pair::isEmpty example
• Example#4163 - Ds\Pair::toArray example
• Example#4164 - Ds\Set::add example using integers
• Example#4165 - Ds\Set::add example using objects
• Example#4166 - Ds\Set::allocate example
• Example#4167 - Ds\Set::capacity example
• Example#4168 - Ds\Set::clear example
• Example#4169 - Ds\Set::__construct example
• Example#4170 - Ds\Set::contains example
• Example#4171 - Ds\Set::copy example
• Example#4172 - Ds\Set::diff example
• Example#4173 - Ds\Set::filter example using callback function
• Example#4174 - Ds\Set::filter example without a callback function
• Example#4175 - Ds\Set::first example
• Example#4176 - Ds\Set::get example
• Example#4177 - Ds\Set::get example using array syntax
• Example#4178 - Ds\Set::intersect example
• Example#4179 - Ds\Set::isEmpty example
• Example#4180 - Ds\Set::join example using a separator string
• Example#4181 - Ds\Set::join example without a separator string
• Example#4182 - Ds\Set::last example
• Example#4183 - Ds\Set::merge example
• Example#4184 - Ds\Set::reduce with initial value example
• Example#4185 - Ds\Set::reduce without an initial value example
• Example#4186 - Ds\Set::remove example
• Example#4187 - Ds\Set::reverse example
• Example#4188 - Ds\Set::reversed example
• Example#4189 - Ds\Set::slice example
• Example#4190 - Ds\Set::sort example
• Example#4191 - Ds\Set::sort example using a comparator
• Example#4192 - Ds\Set::sorted example
• Example#4193 - Ds\Set::sorted example using a comparator
• Example#4194 - Ds\Set::sum integer example
• Example#4195 - Ds\Set::sum float example
• Example#4196 - Ds\Set::toArray example
• Example#4197 - Ds\Set::union example
• Example#4198 - Ds\Set::xor example
• Example#4199 - Ds\Stack::clear example
• Example#4200 - Ds\Stack::__construct example
• Example#4201 - Ds\Stack::copy example
• Example#4202 - Ds\Stack::isEmpty example
• Example#4203 - Ds\Stack::peek example
• Example#4204 - Ds\Stack::pop example
• Example#4205 - Ds\Stack::push example
• Example#4206 - Ds\Stack::toArray example
• Example#4207 - Ds\Queue::allocate example
• Example#4208 - Ds\Queue::capacity example
• Example#4209 - Ds\Queue::clear example
• Example#4210 - Ds\Queue::__construct example
• Example#4211 - Ds\Queue::copy example
• Example#4212 - Ds\Queue::isEmpty example
• Example#4213 - Ds\Queue::peek example
• Example#4214 - Ds\Queue::pop example
• Example#4215 - Ds\Queue::push example
• Example#4216 - Ds\Queue::toArray example
• Example#4217 - Ds\PriorityQueue::allocate example
• Example#4218 - Ds\PriorityQueue::capacity example
• Example#4219 - Ds\PriorityQueue::clear example
• Example#4220 - Ds\PriorityQueue::__construct example
• Example#4221 - Ds\PriorityQueue::copy example
• Example#4222 - Ds\PriorityQueue::isEmpty example
• Example#4223 - Ds\PriorityQueue::peek example
• Example#4224 - Ds\PriorityQueue::pop example
• Example#4225 - Ds\PriorityQueue::push example
• Example#4226 - Ds\PriorityQueue::toArray example
• Example#4227 - var_representation Examples
• Example#4228 - Escaping control characters
• Example#4229 - Exporting stdClass
• Example#4230 - Exporting classes
• Example#4231 - Using __set_state()
• Example#4232 - Using PHP's cURL module to fetch the example.com homepage
• Example#4233 - Initializing a new cURL session and fetching a web page
• Example#4234 - Copying a cURL handle
• Example#4235 - curl_errno example
• Example#4236 - curl_error example
• Example#4237 - curl_escape example
• Example#4238 - Fetching a web page
• Example#4239 - curl_getinfo example
• Example#4240 - curl_getinfo example with option parameter
• Example#4241 - Initializing a new cURL session and fetching a web page
• Example#4242 - curl_multi_add_handle example
• Example#4243 - curl_multi_close example
• Example#4244 - curl_multi_exec example
• Example#4245 - A curl_multi_info_read example
• Example#4246 - curl_multi_init example
• Example#4247 - curl_multi_strerror example
• Example#4248 - curl_reset example
• Example#4249 - Initializing a new cURL session and fetching a web page
• Example#4250 - Initializing a new cURL session and fetching a web page
• Example#4251 - curl_share_setopt example
• Example#4252 - curl_share_init example
• Example#4253 - curl_share_setopt example
• Example#4254 - curl_errno example
• Example#4255 - curl_escape example
• Example#4256 - curl_upkeep example
• Example#4257 - curl_version example
• Example#4258 - CURLFile::__construct example
• Example#4259 - CURLFile::__construct uploading multiple files example
• Example#4260 - CURLStringFile::__construct example
• Example#4261 - Simple HTTP client
• Example#4262 - HTTP client using asynchronous DNS resolver
• Example#4263 - Echo server
• Example#4264 - SSL echo server
• Example#4265 - Signal handler
• Example#4266 - Use libevent's loop to process requests of `eio' extension
• Example#4267 - Miscellaneous
• Example#4268 - Simple HTTP server
• Example#4269 - Simple HTTPS server
• Example#4270 - OpenSSL connection
• Example#4271 - EventHttpConnection::makeRequest example
• Example#4272 - Connection listener based on a UNIX domain socket
• Example#4273 - Simple SMTP server
• Example#4274 - Handling SIGTERM signal
• Example#4275 - Adding a custom signal
• Example#4276 - Adding a timer
• Example#4277 - EventBase::getFeatures example
• Example#4278 - EventBase::getMethod example
• Example#4279 - EventBuffer::search example
• Example#4280 - EventBufferEvent::connect example
• Example#4281 - Connect to UNIX domain socket which presumably is served by a server, read response from the server and output it to the console
• Example#4282 - EventBufferEvent::connectHost example
• Example#4283 - Buffer event's read callback
• Example#4284 - EventBufferEvent::getOutput example
• Example#4285 - EventBufferEvent::sslError example
• Example#4286 - Simple SMTP server
• Example#4287 - EventConfig::avoidMethod example
• Example#4288 - EventConfig::__construct example
• Example#4289 - EventConfig::requireFeatures example
• Example#4290 - EventHttp::accept example
• Example#4291 - EventHttp::addServerAlias example
• Example#4292 - EventHttp::bind example
• Example#4293 - Simple HTTP server
• Example#4294 - EventHttp::setCallback example
• Example#4295 - EventHttp::setDefaultCallback example
• Example#4296 - EventHttpConnection::makeRequest example
• Example#4297 - EventHttpConnection::setCloseCallback example
• Example#4298 - EventHttpRequest::__construct example
• Example#4299 - EventHttpRequest::sendError example
• Example#4300 - EventListener::__construct example
• Example#4301 - EventSslContext::__construct example
• Example#4302 - FTP example
• Example#4303 - ftp_alloc example
• Example#4304 - ftp_cdup example
• Example#4305 - ftp_chdir example
• Example#4306 - ftp_chmod example
• Example#4307 - ftp_close example
• Example#4308 - ftp_connect example
• Example#4309 - ftp_delete example
• Example#4310 - ftp_exec example
• Example#4311 - ftp_fget example
• Example#4312 - ftp_fput example
• Example#4313 - ftp_get_option example
• Example#4314 - ftp_get example
• Example#4315 - ftp_login example
• Example#4316 - ftp_mdtm example
• Example#4317 - ftp_mkdir example
• Example#4318 - ftp_mlsd example
• Example#4319 - ftp_nb_continue example
• Example#4320 - ftp_nb_fget example
• Example#4321 - ftp_nb_fput example
• Example#4322 - ftp_nb_get example
• Example#4323 - Resuming a download with ftp_nb_get
• Example#4324 - Resuming a download at position 100 to a new file with ftp_nb_get
• Example#4325 - ftp_nb_put example
• Example#4326 - Resuming an upload with ftp_nb_put
• Example#4327 - ftp_nlist example
• Example#4328 - ftp_pasv example
• Example#4329 - ftp_put example
• Example#4330 - ftp_pwd example
• Example#4331 - Using ftp_raw to login to an FTP server manually.
• Example#4332 - ftp_rawlist example
• Example#4333 - ftp_rename example
• Example#4334 - ftp_rmdir example
• Example#4335 - ftp_set_option example
• Example#4336 - Sending a SITE command to an ftp server
• Example#4337 - ftp_size example
• Example#4338 - ftp_ssl_connect example
• Example#4339 - ftp_systype example
• Example#4340 - Basic Gearman client and worker
• Example#4341 - Basic Gearman client and worker, background
• Example#4342 - Basic Gearman client and worker, submitting tasks
• Example#4343 - Adding two job servers
• Example#4344 - Add two job servers
• Example#4345 - Basic submission of two tasks
• Example#4346 - Basic submission of two tasks with passing application context
• Example#4347 - Two tasks, one background and one not
• Example#4348 - A high priority task along with two normal tasks
• Example#4349 - A low priority task along with two normal tasks
• Example#4350 - Monitor completion of multiple background tasks
• Example#4351 - Simple job submission with immediate return
• Example#4352 - Submitting a job and retrieving incremental status
• Example#4353 - Submit and monitor a background job
• Example#4354 - Simple job submission with immediate return
• Example#4355 - Submitting a job and retrieving incremental status
• Example#4356 - Get the status of a long running job
• Example#4357 - Monitor the status of a long running background job
• Example#4358 - Simple worker making use of extra application context data
• Example#4359 - Add alternate Gearman servers
• Example#4360 - Add two job servers
• Example#4361 - GearmanWorker::setId example
• Example#4362 - A simple worker with a 5 second timeout
• Example#4363 - Running worker in non-blocking mode
• Example#4364 - GearmanWorker::work example
• Example#4365 - Testing support for paged result control
• Example#4366 - LDAP search example
• Example#4367 - Bind with policy information
• Example#4368 - Modify description only if it's not empty
• Example#4369 - Read some values before deletion
• Example#4370 - Delete a reference
• Example#4371 - Use pagination for a search
• Example#4372 - Complete example with authenticated bind
• Example#4373 - Using LDAP Bind
• Example#4374 - Using LDAP Bind Anonymously
• Example#4375 - Complete example of password check
• Example#4376 - Example of connecting to LDAP server.
• Example#4377 - Example of connecting securely to LDAP server.
• Example#4378 - LDAP pagination
• Example#4379 - LDAP pagination
• Example#4380 - ldap_count_entries example
• Example#4381 - Enumerating all LDAP error messages
• Example#4382 - Generating and catching an error
• Example#4383 - Searching for an email address
• Example#4384 - PASSWD extended operation
• Example#4385 - Whoami extended operation
• Example#4386 - Show the list of attributes held for a particular directory entry
• Example#4387 - Check protocol version
• Example#4388 - List all values of the "mail" attribute for a directory entry
• Example#4389 - Produce a list of all organizational units of an organization
• Example#4390 - Add a telephone number to a contact
• Example#4391 - Rename a user
• Example#4392 - Add two e-mail addresses to a user
• Example#4393 - Change a user's password
• Example#4394 - Change a user's password (Active Directory)
• Example#4395 - ldap_parse_result example
• Example#4396 - LDAP search
• Example#4397 - Set protocol version
• Example#4398 - Set server controls
• Example#4399 - LDAP sort
• Example#4400 - memcache extension overview example
• Example#4401 - Using memcache session handler
• Example#4402 - Memcache::add example
• Example#4403 - Memcache::addServer example
• Example#4404 - Memcache::close example
• Example#4405 - Memcache::connect example
• Example#4406 - Memcache::decrement example
• Example#4407 - Memcache::delete example
• Example#4408 - Memcache::flush example
• Example#4409 - Memcache::get example
• Example#4410 - Memcache::getExtendedStats example
• Example#4411 - Memcache::getServerStatus example
• Example#4412 - Memcache::getVersion example
• Example#4413 - Memcache::increment example
• Example#4414 - Memcache::pconnect example
• Example#4415 - Memcache::replace example
• Example#4416 - Memcache::set example
• Example#4417 - Memcache::set example
• Example#4418 - Memcache::setCompressThreshold example
• Example#4419 - Memcache::setServerParams example
• Example#4420 - Result callback example
• Example#4421 - Read-through callback example
• Example#4422 - Memcached::addServer example
• Example#4423 - Memcached::addServers example
• Example#4424 - Memcached::append example
• Example#4425 - Memcached::cas example
• Example#4426 - Creating a Memcached object
• Example#4427 - Memcached::decrement example
• Example#4428 - Memcached::delete example
• Example#4429 - Memcached::fetch example
• Example#4430 - Memcached::getDelayed example
• Example#4431 - Memcached::flush example
• Example#4432 - Memcached::get example #1
• Example#4433 - Memcached::get example #2
• Example#4434 - Memcached::getDelayed example
• Example#4435 - Memcached::getMulti example for Memcached v3
• Example#4436 - Memcached::getMulti example for Memcached v1 and v2
• Example#4437 - Memcached::GET_PRESERVE_ORDER example for Memcached v3
• Example#4438 - Memcached::GET_PRESERVE_ORDER example for Memcached v1 and v2
• Example#4439 - Retrieving Memcached options
• Example#4440 - Memcached::getResultCode example
• Example#4441 - Memcached::getResultMessage example
• Example#4442 - Memcached::getServerByKey example
• Example#4443 - Memcached::getServerList example
• Example#4444 - Memcached::getStats example
• Example#4445 - Memcached::getVersion example
• Example#4446 - Memcached::increment example
• Example#4447 - Memcached::prepend example
• Example#4448 - Memcached::set example
• Example#4449 - Memcached::setByKey example
• Example#4450 - Memcached::setMulti example
• Example#4451 - Setting a Memcached option
• Example#4452 - Setting Memcached options
• Example#4453 - mqseries_back example
• Example#4454 - mqseries_begin example
• Example#4455 - mqseries_close example
• Example#4456 - mqseries_cmit example
• Example#4457 - mqseries_conn example
• Example#4458 - mqseries_connx example
• Example#4459 - mqseries_connx example using SSL connection & OCSP Responder URL
• Example#4460 - mqseries_disc example
• Example#4461 - mqseries_get example
• Example#4462 - mqseries_inq example
• Example#4463 - mqseries_open example
• Example#4464 - mqseries_put example
• Example#4465 - mqseries_strerror example
• Example#4466 - Using dns_get_record
• Example#4467 - Using dns_get_record and DNS_ANY
• Example#4468 - fsockopen Example
• Example#4469 - Using UDP connection
• Example#4470 - A simple gethostbyaddr example
• Example#4471 - A simple gethostbyname example
• Example#4472 - gethostbynamel example
• Example#4473 - A simple gethostname example
• Example#4474 - getprotobyname example
• Example#4475 - getservbyname example
• Example#4476 - header_register_callback example
• Example#4477 - Unsetting specific header.
• Example#4478 - Unsetting all previously set headers.
• Example#4479 - Download dialog
• Example#4480 - Caching directives
• Example#4481 - Example using headers_list
• Example#4482 - Examples using headers_sent
• Example#4483 - Using http_response_code in a web server environment
• Example#4484 - Using http_response_code in a CLI environment
• Example#4485 - inet_ntop Example
• Example#4486 - inet_pton Example
• Example#4487 - ip2long Example
• Example#4488 - Displaying an IP address
• Example#4489 - setcookie send example
• Example#4490 - setcookie delete example
• Example#4491 - setcookie and arrays
• Example#4492 - Using syslog
• Example#4493 - Procedural usage of rrd
• Example#4494 - OO usage of rrd
• Example#4495 - RRDGraph::setOptions example
• Example#4496 - Set multiple color options
• Example#4497 - RRDUpdater::update examples
• Example#4498 - Fetch instrumented calls
• Example#4499 - Fetch the list of functions scoutapm will instrument
• Example#4500 - snmp_get_quick_print example
• Example#4501 - Using snmp_get_valueretrieval
• Example#4502 - Using snmp_read_mib
• Example#4503 - Using snmp_set_enum_print
• Example#4504 - Using snmprealwalk
• Example#4505 - Using snmp_set_quick_print
• Example#4506 - Using snmp_set_valueretrieval
• Example#4507 - Using snmp2_get
• Example#4508 - Using snmp2_get_next
• Example#4509 - Using snmp2_real_walk
• Example#4510 - Using snmp2_set
• Example#4511 - Using snmp2_set for setting BITS SNMP object id
• Example#4512 - snmp2_walk Example
• Example#4513 - Using snmp3_get
• Example#4514 - Using snmp3_getnext
• Example#4515 - Using snmp3_real_walk
• Example#4516 - Using snmp3_set
• Example#4517 - Using snmp3_set for setting BITS SNMP object id
• Example#4518 - snmp3_walk Example
• Example#4519 - Using snmpget
• Example#4520 - Using snmpgetnext
• Example#4521 - Using snmprealwalk
• Example#4522 - Using snmpset
• Example#4523 - Using snmpset for setting BITS SNMP object id
• Example#4524 - snmpwalk Example
• Example#4525 - snmpwalkoid Example
• Example#4526 - SNMP::close example
• Example#4527 - Fetching sysLocation
• Example#4528 - Single SNMP object
• Example#4529 - Multiple SNMP objects
• Example#4530 - SNMP::getErrno example
• Example#4531 - SNMP::getError example
• Example#4532 - Single SNMP object
• Example#4533 - Miltiple SNMP objects
• Example#4534 - Set single SNMP object id
• Example#4535 - Set multiple values using single SNMP::set call
• Example#4536 - Using SNMP::set for setting BITS SNMP object id
• Example#4537 - SNMP::setSecurity example
• Example#4538 - SNMP::walk example
• Example#4539 - suffixAsKey example
• Example#4540 - Socket example: Simple TCP/IP server
• Example#4541 - Socket example: Simple TCP/IP client
• Example#4542 - Using socket_bind to set the source address
• Example#4543 - socket_create_pair example
• Example#4544 - socket_create_pair IPC example
• Example#4545 - socket_get_option example
• Example#4546 - socket_import_stream example
• Example#4547 - socket_last_error example
• Example#4548 - socket_recv example
• Example#4549 - socket_recvfrom example
• Example#4550 - Using null with socket_select
• Example#4551 - Understanding socket_select's result
• Example#4552 - socket_select example
• Example#4553 - socket_sendto Example
• Example#4554 - socket_set_block example
• Example#4555 - socket_set_nonblock example
• Example#4556 - socket_set_option example
• Example#4557 - socket_strerror example
• Example#4558 - Authenticating with a ssh agent
• Example#4559 - Authentication using a public hostkey
• Example#4560 - Retrieving a list of authentication methods
• Example#4561 - Authenticating with a password
• Example#4562 - Authentication using a public key
• Example#4563 - ssh2_connect example
• Example#4564 - Executing a command
• Example#4565 - Opening a shell and retrieving the stderr stream associated with it
• Example#4566 - Checking the fingerprint against a known value
• Example#4567 - Determining what methods were negotiated
• Example#4568 - Adding a publickey with ssh2_publickey_add
• Example#4569 - Listing authorized keys with ssh2_publickey_list
• Example#4570 - Downloading a file via SCP
• Example#4571 - Uploading a file via SCP
• Example#4572 - Changing the mode of a file on a remote server
• Example#4573 - Stating a symbolic link via SFTP
• Example#4574 - Creating a directory on a remote server
• Example#4575 - Reading a symbolic link
• Example#4576 - Resolving a pathname
• Example#4577 - Renaming a file via sftp
• Example#4578 - Removing a directory on a remote server
• Example#4579 - Stating a file via SFTP
• Example#4580 - Creating a symbolic link
• Example#4581 - Deleting a file
• Example#4582 - Opening a file via SFTP
• Example#4583 - Requesting an interactive shell
• Example#4584 - Opening a tunnel to an arbitrary host
• Example#4585 - Object-oriented style
• Example#4586 - Procedural style
• Example#4587 - stomp_connect_error example
• Example#4588 - stomp_version example
• Example#4589 - Object-oriented style
• Example#4590 - Procedural style
• Example#4591 - Object-oriented style
• Example#4592 - Procedural style
• Example#4593 - Object-oriented style
• Example#4594 - Procedural style
• Example#4595 - Object-oriented style
• Example#4596 - Procedural style
• Example#4597 - Object-oriented style
• Example#4598 - Procedural style
• Example#4599 - Object-oriented style
• Example#4600 - Procedural style
• Example#4601 - Object-oriented style
• Example#4602 - Procedural style
• Example#4603 - Object-oriented style
• Example#4604 - Procedural style
• Example#4605 - Object-oriented style
• Example#4606 - Procedural style
• Example#4607 - Train from array
• Example#4608 - Train from a file
• Example#4609 - svn_add example
• Example#4610 - Default authentication example
• Example#4611 - svn_blame example
• Example#4612 - Basic example
• Example#4613 - Basic example
• Example#4614 - Basic example
• Example#4615 - Basic example
• Example#4616 - Basic example
• Example#4617 - Basic example
• Example#4618 - Diffing two revisions of a repository path
• Example#4619 - Portably diffing two local files
• Example#4620 - svn_export example
• Example#4621 - Basic example
• Example#4622 - svn_log example
• Example#4623 - svn_ls example
• Example#4624 - Basic example
• Example#4625 - Basic example
• Example#4626 - Deny all connections from localhost
• Example#4627 - Ban an URL
• Example#4628 - Get statistic snapshot
• Example#4629 - Read varnish shared memory log
• Example#4630 - VarnishAdmin::__construct example
• Example#4631 - Parallel searching using Yaz
• Example#4632 - CCL configuration
• Example#4633 - CCL Parsing
• Example#4634 - Record Update
• Example#4635 - Array for GRS-1 record
• Example#4636 - Working with MARCXML
• Example#4637 - PHP function that scans titles
• Example#4638 - Query Examples
• Example#4639 - Sort Criterias
• Example#4640 - A ZMQContext example
• Example#4641 - A ZMQContext example
• Example#4642 - A ZMQContext example
• Example#4643 - A ZMQSocket example
• Example#4644 - A send/recv example
• Example#4645 - A ZMQPoll example
• Example#4646 - zookeeper_dispatch example #1
• Example#4647 - zookeeper_dispatch example #2
• Example#4648 - Zookeeper::addAuth example
• Example#4649 - Zookeeper::create example
• Example#4650 - Zookeeper::delete example
• Example#4651 - Zookeeper::exists example
• Example#4652 - Zookeeper::get example
• Example#4653 - Zookeeper::get stat example
• Example#4654 - Zookeeper::getAcl example
• Example#4655 - Zookeeper::getChildren example
• Example#4656 - Zookeeper::set example
• Example#4657 - Zookeeper::setAcl example
• Example#4658 - Zookeeper::setDebugLevel example
• Example#4659 - ZookeeperConfig::add example
• Example#4660 - ZookeeperConfig::get example
• Example#4661 - ZookeeperConfig::remove example
• Example#4662 - ZookeeperConfig::set example
• Example#4663 - solr_get_version example
• Example#4664 - Contents of the BootStrap file
• Example#4665 - Adding a document to the index
• Example#4666 - Merging one document into another document
• Example#4667 - Searching for documents - SolrObject responses
• Example#4668 - Searching for documents - SolrDocument responses
• Example#4669 - Simple TermsComponent example - basic
• Example#4670 - Simple TermsComponent example - using a prefix
• Example#4671 - Simple TermsComponent example - specifying a minimum frequency
• Example#4672 - Simple Facet Example
• Example#4673 - Simple Facet Example - with optional field override for mincount
• Example#4674 - Facet Date Example
• Example#4675 - Connecting to SSL-Enabled Server
• Example#4676 - Collapsing a SolrQuery
• Example#4677 - Solr Real Time Get (RTG) example SolrClient::getById
• Example#4678 - SolrInputDocument::addChildDocument example
• Example#4679 - SolrInputDocument::addChildDocuments example
• Example#4680 - SolrDocument::toArray example
• Example#4681 - SolrObject::__construct example
• Example#4682 - SolrObject::offsetUnset example
• Example#4683 - SolrClient::addDocument example
• Example#4684 - SolrClient::addDocument example 2
• Example#4685 - SolrClient::addDocuments example
• Example#4686 - SolrClient::__construct example
• Example#4687 - SolrQuery::deleteByQuery example
• Example#4688 - SolrClient::getById example
• Example#4689 - SolrClient::getByIds example
• Example#4690 - SolrClient::ping example
• Example#4691 - SolrClient::query example
• Example#4692 - SolrClient::request example
• Example#4693 - SolrClient::setResponseWriter example
• Example#4694 - SolrParams::setParam example
• Example#4695 - SolrQuery::addFacetField example
• Example#4696 - SolrQuery::addFacetField example
• Example#4697 - SolrQuery::addFilterQuery example
• Example#4698 - SolrQuery::addGroupSortField example
• Example#4699 - SolrQuery::collapse example
• Example#4700 - SolrQuery::setExpand example
• Example#4701 - SolrDisMaxQuery::addBigramPhraseField example
• Example#4702 - SolrDisMaxQuery::addBoostQuery example
• Example#4703 - SolrDisMaxQuery::addPhraseField example
• Example#4704 - SolrDisMaxQuery::addQueryField example
• Example#4705 - SolrDisMaxQuery::addTrigramPhraseField example
• Example#4706 - SolrDisMaxQuery::addUserField example
• Example#4707 - SolrDisMaxQuery::__construct example
• Example#4708 - SolrDisMaxQuery::removeBigramPhraseField example
• Example#4709 - SolrDisMaxQuery::removeBoostQuery example
• Example#4710 - SolrDisMaxQuery::removePhraseField example
• Example#4711 - SolrDisMaxQuery::removeQueryField example
• Example#4712 - SolrDisMaxQuery::removeTrigramPhraseField example
• Example#4713 - SolrDisMaxQuery::removeUserField example
• Example#4714 - SolrDisMaxQuery::setBigramPhraseFields example
• Example#4715 - SolrDisMaxQuery::setBigramPhraseSlop example
• Example#4716 - SolrDisMaxQuery::setBoostFunction example
• Example#4717 - SolrDisMaxQuery::setBoostQuery example
• Example#4718 - SolrDisMaxQuery::setMinimumMatch example
• Example#4719 - SolrDisMaxQuery::setPhraseFields example
• Example#4720 - SolrDisMaxQuery::setPhraseSlop example
• Example#4721 - SolrDisMaxQuery::setQueryAlt example
• Example#4722 - SolrDisMaxQuery::setQueryPhraseSlop example
• Example#4723 - SolrDisMaxQuery::setTieBreaker example
• Example#4724 - SolrDisMaxQuery::setTrigramPhraseFields example
• Example#4725 - SolrDisMaxQuery::setTrigramPhraseSlop example
• Example#4726 - SolrDisMaxQuery::setUserFields example
• Example#4727 - SolrDisMaxQuery::useDisMaxQueryParser example
• Example#4728 - SolrDisMaxQuery::useEDisMaxQueryParser example
• Example#4729 - SolrCollapseFunction::__construct example
• Example#4730 - SolrCollapseFunction::setHint example
• Example#4731 - SolrCollapseFunction::setMax example
• Example#4732 - Turning off PHP parsing for a directory using .htaccess
• Example#4733 - apache_get_modules example
• Example#4734 - apache_get_version example
• Example#4735 - apache_getenv example
• Example#4736 - apache_lookup_uri example
• Example#4737 - Passing information between PHP and Perl
• Example#4738 - Logging values in access.log
• Example#4739 - apache_request_headers example
• Example#4740 - apache_response_headers example
• Example#4741 - Setting an Apache environment variable using apache_setenv
• Example#4742 - getallheaders example
• Example#4743 - Registering a variable with $_SESSION.
• Example#4744 - Unregistering a variable with $_SESSION.
• Example#4745 - Counting the number of hits of a single user
• Example#4746 - Example information
• Example#4747 - session_cache_expire example
• Example#4748 - session_cache_limiter example
• Example#4749 - session_create_id example with session_regenerate_id
• Example#4750 - Destroying a session with $_SESSION
• Example#4751 - session_gc example for task managers like cron
• Example#4752 - session_gc example for user accessible script
• Example#4753 - session_name example
• Example#4754 - A session_regenerate_id example
• Example#4755 - Avoiding lost session by session_regenerate_id
• Example#4756 - Custom session handler: see full code in SessionHandlerInterface synopsis.
• Example#4757 - page1.php
• Example#4758 - page2.php
• Example#4759 - Overriding the cookie lifetime
• Example#4760 - Reading the session and closing it
• Example#4761 - Using SessionHandler to add encryption to internal PHP save handlers.
• Example#4762 - Example using SessionHandlerInterface
• Example#4763 - Tokenize comma separated integer list
• Example#4764 - Tokenize assign statement
• Example#4765 - Simple calculator
• Example#4766 - Parse words out from a sentence
• Example#4767 - Examples of valid patterns
• Example#4768 - Examples of invalid patterns
• Example#4769 - Usage of comments in PCRE pattern
• Example#4770 - Example comparing preg_filter with preg_replace
• Example#4771 - preg_grep example
• Example#4772 - preg_last_error_msg example
• Example#4773 - preg_last_error example
• Example#4774 - Getting all phone numbers out of some text.
• Example#4775 - Find matching HTML tags (greedy)
• Example#4776 - Using named subpattern
• Example#4777 - Find the string of text "php"
• Example#4778 - Find the word "web"
• Example#4779 - Getting the domain name out of a URL
• Example#4780 - Using named subpattern
• Example#4781 - preg_quote example
• Example#4782 - Italicizing a word within some text
• Example#4783 - preg_replace_callback_array example
• Example#4784 - preg_replace_callback and anonymous function
• Example#4785 - preg_replace_callback example
• Example#4786 - preg_replace_callback using recursive structure to handle encapsulated BB code
• Example#4787 - Using backreferences followed by numeric literals
• Example#4788 - Using indexed arrays with preg_replace
• Example#4789 - Replacing several values
• Example#4790 - Strip whitespace
• Example#4791 - Using the count parameter
• Example#4792 -
• Example#4793 - preg_split example : Get the parts of a search string
• Example#4794 - Splitting a string into component characters
• Example#4795 - Splitting a string into matches and their offsets
• Example#4796 - addcslashes example
• Example#4797 - An addslashes example
• Example#4798 - bin2hex example
• Example#4799 - chr example
• Example#4800 - Overflow behavior
• Example#4801 - Building a UTF-8 string from individual bytes
• Example#4802 - chunk_split example
• Example#4803 - convert_uudecode example
• Example#4804 - convert_uuencode example
• Example#4805 - count_chars example
• Example#4806 - Displaying a crc32 checksum
• Example#4807 - crypt examples
• Example#4808 - Using crypt with htpasswd
• Example#4809 - Using crypt with different hash types
• Example#4810 - echo examples
• Example#4811 -
• Example#4812 - explode examples
• Example#4813 - explode return examples
• Example#4814 - limit parameter examples
• Example#4815 - fprintf: zero-padded integers
• Example#4816 - fprintf: formatting currency
• Example#4817 - Translation Table Example
• Example#4818 - hex2bin example
• Example#4819 - Decoding HTML entities
• Example#4820 - A htmlentities example
• Example#4821 - Usage of ENT_IGNORE
• Example#4822 - A htmlspecialchars_decode example
• Example#4823 - htmlspecialchars example
• Example#4824 - implode example
• Example#4825 - lcfirst example
• Example#4826 - levenshtein example
• Example#4827 - localeconv example
• Example#4828 - Usage example of ltrim
• Example#4829 - Usage example of md5_file
• Example#4830 - A md5 example
• Example#4831 - metaphone basic example
• Example#4832 - Using the max_phonemes parameter
• Example#4833 - Using the max_phonemes parameter
• Example#4834 - money_format Example
• Example#4835 - nl_langinfo example
• Example#4836 - Using nl2br
• Example#4837 - Generating valid HTML markup using the use_xhtml parameter
• Example#4838 - Various newline separators
• Example#4839 - number_format Example
• Example#4840 - ord example
• Example#4841 - Examining the individual bytes of a UTF-8 string
• Example#4842 - Using parse_str
• Example#4843 - parse_str name mangling
• Example#4844 - print examples
• Example#4845 -
• Example#4846 -
• Example#4847 - printf: various examples
• Example#4848 - printf: string specifiers
• Example#4849 - quoted_printable_decode example
• Example#4850 - quoted_printable_encode example
• Example#4851 - quotemeta example
• Example#4852 - Usage example of rtrim
• Example#4853 - setlocale Examples
• Example#4854 - setlocale Examples for Windows
• Example#4855 - sha1_file example
• Example#4856 - A sha1 example
• Example#4857 - similar_text argument swapping example
• Example#4858 - Soundex Examples
• Example#4859 - Argument swapping
• Example#4860 - Specifying padding character
• Example#4861 - Position specifier with other specifiers
• Example#4862 - sprintf: zero-padded integers
• Example#4863 - sprintf: formatting currency
• Example#4864 - sprintf: scientific notation
• Example#4865 - sscanf Example
• Example#4866 - sscanf - using optional parameters
• Example#4867 - Using the empty string ''
• Example#4868 - Showing case-sensitivity
• Example#4869 - Using the empty string ''
• Example#4870 - Showing case-sensitivity
• Example#4871 - str_getcsv example
• Example#4872 - str_ireplace example
• Example#4873 - str_pad example
• Example#4874 - str_repeat example
• Example#4875 - Basic str_replace examples
• Example#4876 - Examples of potential str_replace gotchas
• Example#4877 - str_rot13 example
• Example#4878 - str_shuffle example
• Example#4879 - Example uses of str_split
• Example#4880 - Using the empty string ''
• Example#4881 - Showing case-sensitivity
• Example#4882 - A str_word_count example
• Example#4883 - strcasecmp example
• Example#4884 - strcmp example
• Example#4885 - strcspn example
• Example#4886 - strip_tags example
• Example#4887 - stripcslashes example
• Example#4888 - stripos examples
• Example#4889 - A stripslashes example
• Example#4890 - Using stripslashes on an array
• Example#4891 - stristr example
• Example#4892 - Testing if a string is found or not
• Example#4893 - Using a non "string" needle
• Example#4894 - A strlen example
• Example#4895 - strnatcasecmp example
• Example#4896 - strncasecmp example
• Example#4897 - strncmp example
• Example#4898 - strpbrk example
• Example#4899 - Using ===
• Example#4900 - Using !==
• Example#4901 - Using an offset
• Example#4902 - strrchr example
• Example#4903 - Reversing a string with strrev
• Example#4904 - A simple strripos example
• Example#4905 - Checking if a needle is in the haystack
• Example#4906 - Searching with offsets
• Example#4907 - strspn example
• Example#4908 - strstr example
• Example#4909 - strtok example
• Example#4910 - strtok behavior on empty part found
• Example#4911 - The difference between strtok and explode
• Example#4912 - strtolower example
• Example#4913 - strtoupper example
• Example#4914 - strtr example
• Example#4915 - strtr example with two arguments
• Example#4916 - strtr behavior comparison
• Example#4917 - A substr_compare example
• Example#4918 - A substr_count example
• Example#4919 - Simple substr_replace examples
• Example#4920 - Using substr_replace to replace multiple strings at once
• Example#4921 - Using a negative offset
• Example#4922 - Using a negative length
• Example#4923 - Basic substr usage
• Example#4924 - substr casting behaviour
• Example#4925 -
• Example#4926 - Invalid Character Range
• Example#4927 - Usage example of trim
• Example#4928 - Trimming array values with trim
• Example#4929 - ucfirst example
• Example#4930 - ucwords example
• Example#4931 - ucwords example with custom delimiter
• Example#4932 - ucwords example with additional delimiters
• Example#4933 - Basic examples
• Example#4934 - Basic example
• Example#4935 - vfprintf: zero-padded integers
• Example#4936 - vprintf: zero-padded integers
• Example#4937 - vsprintf: zero-padded integers
• Example#4938 - wordwrap example
• Example#4939 - wordwrap example
• Example#4940 - wordwrap example
• Example#4941 - array_change_key_case example
• Example#4942 - array_chunk example
• Example#4943 - Get the column of first names from a recordset
• Example#4944 - Get the column of last names from a recordset, indexed by the "id" column
• Example#4945 - Get the column of usernames from the public "username" property of an object
• Example#4946 - Get the column of names from the private "name" property of an object using the magic __get method.
• Example#4947 - A simple array_combine example
• Example#4948 - array_count_values example
• Example#4949 - array_diff_assoc example
• Example#4950 - array_diff_assoc example
• Example#4951 - array_diff_key example
• Example#4952 - array_diff_uassoc example
• Example#4953 - array_diff_ukey example
• Example#4954 - array_diff example
• Example#4955 - array_diff example with non-matching types
• Example#4956 - array_fill_keys example
• Example#4957 - array_fill example
• Example#4958 - array_fill example with a negative start index
• Example#4959 - array_filter example
• Example#4960 - array_filter without callback
• Example#4961 - array_filter with mode
• Example#4962 - array_flip example
• Example#4963 - array_flip example : collision
• Example#4964 - array_intersect_assoc example
• Example#4965 - array_intersect_key example
• Example#4966 - array_intersect_uassoc example
• Example#4967 - array_intersect_ukey example
• Example#4968 - array_intersect example
• Example#4969 - array_is_list example
• Example#4970 - array_key_exists example
• Example#4971 - array_key_exists vs isset
• Example#4972 - Basic array_key_first Usage
• Example#4973 - array_keys example
• Example#4974 - array_map example
• Example#4975 - array_map using a lambda function
• Example#4976 - array_map - using more arrays
• Example#4977 - Performing a zip operation of arrays
• Example#4978 - null callback with only array
• Example#4979 - array_map - with string keys
• Example#4980 - array_map - associative arrays
• Example#4981 - array_merge_recursive example
• Example#4982 - array_merge example
• Example#4983 - Simple array_merge example
• Example#4984 - array_merge with non-array types
• Example#4985 - Sorting multiple arrays
• Example#4986 - Sorting multi-dimensional array
• Example#4987 - Sorting database results
• Example#4988 - Case insensitive sorting
• Example#4989 - array_pad example
• Example#4990 - array_pop example
• Example#4991 - array_product examples
• Example#4992 - array_push example
• Example#4993 - array_rand example
• Example#4994 - array_reduce example
• Example#4995 - array_replace_recursive example
• Example#4996 - array_replace_recursive and recursive behavior
• Example#4997 - array_replace example
• Example#4998 - array_reverse example
• Example#4999 - array_search example
• Example#5000 - array_shift example
• Example#5001 - array_slice examples
• Example#5002 - array_slice and one-based array
• Example#5003 - array_slice and array with mixed keys
• Example#5004 - array_splice examples
• Example#5005 - Equivalent statements to various array_splice examples
• Example#5006 - array_sum examples
• Example#5007 - array_udiff_assoc example
• Example#5008 - array_udiff_uassoc example
• Example#5009 - array_udiff example using stdClass Objects
• Example#5010 - array_udiff example using DateTime Objects
• Example#5011 - array_uintersect_assoc example
• Example#5012 - array_uintersect_uassoc example
• Example#5013 - array_uintersect example
• Example#5014 - array_unique example
• Example#5015 - array_unique and types
• Example#5016 - array_unshift example
• Example#5017 - array_values example
• Example#5018 - array_walk_recursive example
• Example#5019 - array_walk example
• Example#5020 - array_walk example using anonymous function
• Example#5021 - array example
• Example#5022 - Automatic index with array
• Example#5023 - 1-based index with array
• Example#5024 - Accessing an array inside double quotes
• Example#5025 - arsort example
• Example#5026 - asort example
• Example#5027 - compact example
• Example#5028 - count example
• Example#5029 - count non Countable|array example (bad example - don't do this)
• Example#5030 - Recursive count example
• Example#5031 - Countable object
• Example#5032 - Example use of current and friends
• Example#5033 - each examples
• Example#5034 - Traversing an array with each
• Example#5035 - end example
• Example#5036 - extract example
• Example#5037 - in_array example
• Example#5038 - in_array with strict example
• Example#5039 - in_array with an array as needle
• Example#5040 - key example
• Example#5041 - krsort example
• Example#5042 - ksort example
• Example#5043 - ksort with int keys
• Example#5044 - list examples
• Example#5045 - An example use of list
• Example#5046 - Using nested list
• Example#5047 - list and order of index definitions
• Example#5048 - list with keys
• Example#5049 - natcasesort example
• Example#5050 - natsort examples demonstrating basic usage
• Example#5051 - natsort examples demonstrating potential gotchas
• Example#5052 - Example use of next and friends
• Example#5053 - Example use of prev and friends
• Example#5054 - range examples
• Example#5055 - reset example
• Example#5056 - rsort example
• Example#5057 - shuffle example
• Example#5058 - sort example
• Example#5059 - sort example using case-insensitive natural ordering
• Example#5060 - Basic uasort example
• Example#5061 - uksort example
• Example#5062 - usort example
• Example#5063 - usort example using multi-dimensional array
• Example#5064 - usort example using a member function of an object
• Example#5065 - usort example using a closure to sort a multi-dimensional array
• Example#5066 - usort example using the spaceship operator
• Example#5067 - Class Definitions
• Example#5068 - test_script.php
• Example#5069 - class_alias example
• Example#5070 - class_exists example
• Example#5071 - autoload parameter example
• Example#5072 - enum_exists example
• Example#5073 - Using get_called_class
• Example#5074 - get_class_methods example
• Example#5075 - get_class_vars example
• Example#5076 - get_class_vars and scoping behaviour
• Example#5077 - Using get_class
• Example#5078 - Using get_class in superclass
• Example#5079 - Using get_class with namespaced classes
• Example#5080 - get_declared_classes example
• Example#5081 - get_declared_interfaces example
• Example#5082 - get_mangled_object_vars example
• Example#5083 - Use of get_object_vars
• Example#5084 - Using get_parent_class
• Example#5085 - interface_exists example
• Example#5086 - is_a example
• Example#5087 - Using the instanceof operator
• Example#5088 - is_subclass_of example
• Example#5089 - is_subclass_of using interface example
• Example#5090 - method_exists example
• Example#5091 - Static method_exists example
• Example#5092 - A property_exists example
• Example#5093 - A ctype_alnum example (using the default locale)
• Example#5094 - A ctype_alpha example (using the default locale)
• Example#5095 - A ctype_cntrl example
• Example#5096 - A ctype_digit example
• Example#5097 - A ctype_digit example comparing strings with integers
• Example#5098 - A ctype_graph example
• Example#5099 - A ctype_lower example (using the default locale)
• Example#5100 - A ctype_print example
• Example#5101 - A ctype_punct example
• Example#5102 - A ctype_space example
• Example#5103 - A ctype_upper example (using the default locale)
• Example#5104 - A ctype_xdigit example
• Example#5105 - Configuring the default filter to act like htmlspecialchars
• Example#5106 - Configuring the default filter to act like htmlspecialchars
• Example#5107 - Validating email addresses with filter_var
• Example#5108 - Validating IP addresses with filter_var
• Example#5109 - Passing options to filter_var
• Example#5110 - Sanitizing and validating email addresses
• Example#5111 - Configuring a default filter
• Example#5112 - A filter_input_array example
• Example#5113 - A filter_input example
• Example#5114 - A filter_list example
• Example#5115 - A filter_var_array example
• Example#5116 - A filter_var example
• Example#5117 - call_user_func_array example
• Example#5118 - call_user_func_array using namespace name
• Example#5119 - Using lambda function
• Example#5120 - Passing values by reference
• Example#5121 - call_user_func example and references
• Example#5122 - call_user_func example
• Example#5123 - call_user_func using namespace name
• Example#5124 - Using a class method with call_user_func
• Example#5125 - Using lambda function with call_user_func
• Example#5126 - Creating a function dynamically, with create_function or anonymous functions
• Example#5127 - Making a general processing function, with create_function or anonymous functions
• Example#5128 - Using dynamic functions as callback functions
• Example#5129 - forward_static_call_array example
• Example#5130 - forward_static_call example
• Example#5131 - func_get_arg example
• Example#5132 - func_get_arg example of byref and byval arguments
• Example#5133 - func_get_args example
• Example#5134 - func_get_args example of byref and byval arguments
• Example#5135 - func_num_args example
• Example#5136 - function_exists example
• Example#5137 - get_defined_functions example
• Example#5138 - register_shutdown_function example
• Example#5139 - register_tick_function example
• Example#5140 - Quickhash Example
• Example#5141 - Quickhash ArrayAccess Example
• Example#5142 - Quickhash Iterator Example
• Example#5143 - Quickhash String Values Example
• Example#5144 - QuickHashIntSet::add example
• Example#5145 - QuickHashIntSet::__construct example
• Example#5146 - QuickHashIntSet::delete example
• Example#5147 - QuickHashIntSet::exists example
• Example#5148 - QuickHashIntSet::getSize example
• Example#5149 - QuickHashIntSet::loadFromFile example
• Example#5150 - QuickHashIntSet::loadFromString example
• Example#5151 - QuickHashIntSet::saveToFile example
• Example#5152 - QuickHashIntSet::saveToString example
• Example#5153 - QuickHashIntHash::add example
• Example#5154 - QuickHashIntHash::__construct example
• Example#5155 - QuickHashIntHash::delete example
• Example#5156 - QuickHashIntHash::exists example
• Example#5157 - QuickHashIntHash::get example
• Example#5158 - QuickHashIntHash::getSize example
• Example#5159 - QuickHash IntHash file format
• Example#5160 - QuickHash IntHash file format
• Example#5161 - QuickHashIntHash::loadFromFile example
• Example#5162 - QuickHashIntHash::loadFromString example
• Example#5163 - QuickHashIntHash::saveToFile example
• Example#5164 - QuickHashIntHash::saveToString example
• Example#5165 - QuickHashIntHash::set example
• Example#5166 - QuickHashIntHash::update example
• Example#5167 - QuickHashStringIntHash::add example
• Example#5168 - QuickHashStringIntHash::__construct example
• Example#5169 - QuickHashStringIntHash::delete example
• Example#5170 - QuickHashStringIntHash::get example
• Example#5171 - QuickHashStringIntHash::getSize example
• Example#5172 - QuickHash StringIntHash file format
• Example#5173 - QuickHash IntHash file format
• Example#5174 - QuickHashStringIntHash::loadFromFile example
• Example#5175 - QuickHashStringIntHash::loadFromString example
• Example#5176 - QuickHashStringIntHash::saveToFile example
• Example#5177 - QuickHashStringIntHash::saveToString example
• Example#5178 - QuickHashStringIntHash::set example
• Example#5179 - QuickHashStringIntHash::update example
• Example#5180 - QuickHashIntStringHash::add example
• Example#5181 - QuickHashIntStringHash::__construct example
• Example#5182 - QuickHashIntStringHash::delete example
• Example#5183 - QuickHashIntStringHash::get example
• Example#5184 - QuickHashIntStringHash::getSize example
• Example#5185 - QuickHash IntString file format
• Example#5186 - QuickHash IntString file format
• Example#5187 - QuickHashIntStringHash::loadFromFile example
• Example#5188 - QuickHashIntStringHash::loadFromString example
• Example#5189 - QuickHashIntStringHash::saveToFile example
• Example#5190 - QuickHashIntStringHash::saveToString example
• Example#5191 - QuickHashIntStringHash::set example
• Example#5192 - QuickHashIntStringHash::update example
• Example#5193 - Reflection Example from Shell (a Terminal)
• Example#5194 - Extending the built-in classes
• Example#5195 - Reflection::getModifierNames example
• Example#5196 - Basic usage ReflectionClass
• Example#5197 - Basic usage of ReflectionClass::export
• Example#5198 - Basic usage
• Example#5199 - Filtering results by class name
• Example#5200 - Filtering results by class name, with inheritance
• Example#5201 - Usage of ReflectionClass::getConstant
• Example#5202 - Basic usage of ReflectionClass::getConstructor
• Example#5203 - ReflectionClass::getDefaultProperties example
• Example#5204 - ReflectionClass::getDocComment example
• Example#5205 - ReflectionClass::getEndLine example
• Example#5206 - Basic usage of ReflectionClass::getExtension
• Example#5207 - Basic usage of ReflectionClass::getExtensionName
• Example#5208 - ReflectionClass::getInterfaceNames example
• Example#5209 - ReflectionClass::getInterfaces example
• Example#5210 - Basic usage of ReflectionClass::getMethod
• Example#5211 - Basic usage of ReflectionClass::getMethods
• Example#5212 - Filtering results from ReflectionClass::getMethods
• Example#5213 - ReflectionClass::getName example
• Example#5214 - ReflectionClass::getNamespaceName example
• Example#5215 - ReflectionClass::getProperties filtering example
• Example#5216 - Basic usage of ReflectionClass::getProperty
• Example#5217 - Basic ReflectionClass::getReflectionConstants example
• Example#5218 - ReflectionClass::getShortName example
• Example#5219 - Basic usage of ReflectionClass::getStaticPropertyValue
• Example#5220 - ReflectionClass::hasConstant example
• Example#5221 - ReflectionClass::hasMethod example
• Example#5222 - ReflectionClass::hasProperty example
• Example#5223 - ReflectionClass::inNamespace example
• Example#5224 - ReflectionClass::isAbstract example
• Example#5225 - ReflectionClass::isAnonymous example
• Example#5226 - Basic usage of ReflectionClass::isCloneable
• Example#5227 - ReflectionClass::isFinal example
• Example#5228 - ReflectionClass::isInstance related examples
• Example#5229 - ReflectionClass::isInstantiable example
• Example#5230 - Basic usage of ReflectionClass::isInterface
• Example#5231 - Basic usage of ReflectionClass::isInternal
• Example#5232 - Basic ReflectionClass::isIterable Usage
• Example#5233 - Basic usage of ReflectionClass::newInstanceArgs
• Example#5234 - ReflectionClass::__toString example
• Example#5235 - ReflectionClassConstant::isEnumCase example
• Example#5236 - ReflectionEnum::getBackingType example
• Example#5237 - ReflectionEnum::getCase example
• Example#5238 - ReflectionEnum::getCases example
• Example#5239 - ReflectionEnum::hasCase example
• Example#5240 - ReflectionEnum::isBacked example
• Example#5241 - ReflectionEnum::getValue example
• Example#5242 - ReflectionEnum::getBackingValue example
• Example#5243 - ReflectionExtension example
• Example#5244 - ReflectionExtension::getClasses example
• Example#5245 - ReflectionExtension::getClassNames example
• Example#5246 - ReflectionExtension::getConstants example
• Example#5247 - ReflectionExtension::getDependencies example
• Example#5248 - ReflectionExtension::getFunctions example
• Example#5249 - ReflectionExtension::getINIEntries example
• Example#5250 - ReflectionExtension::getName example
• Example#5251 - ReflectionExtension::getVersion example
• Example#5252 - ReflectionExtension::info example
• Example#5253 - ReflectionFunction::__construct example
• Example#5254 - ReflectionFunction::invoke example
• Example#5255 - ReflectionFunction::invokeArgs example
• Example#5256 - ReflectionFunction::invokeArgs with references example
• Example#5257 - ReflectionFunction::isAnonymous example
• Example#5258 - ReflectionFunction::__toString example
• Example#5259 - ReflectionFunctionAbstract::getClosureUsedVariables example
• Example#5260 - ReflectionFunctionAbstract::getReturnType example
• Example#5261 - Usage on built-in functions
• Example#5262 - ReflectionFunctionAbstract::getTentativeReturnType example
• Example#5263 - ReflectionFunctionAbstract::hasReturnType example
• Example#5264 - Usage on built-in functions
• Example#5265 - ReflectionFunctionAbstract::hasTentativeReturnType example
• Example#5266 - ReflectionFunctionAbstract::isClosure example
• Example#5267 - ReflectionFunctionAbstract::isDeprecated example
• Example#5268 - ReflectionMethod::__construct example
• Example#5269 - ReflectionMethod::getDeclaringClass example
• Example#5270 - ReflectionMethod::getModifiers example
• Example#5271 - ReflectionMethod::getPrototype example
• Example#5272 - ReflectionMethod::hasPrototype example
• Example#5273 - ReflectionMethod::invoke example
• Example#5274 - ReflectionMethod::invokeArgs example
• Example#5275 - Simple Class definition
• Example#5276 - ReflectionMethod::__toString example
• Example#5277 - ReflectionNamedType::isBuiltin example
• Example#5278 - Using the ReflectionParameter class
• Example#5279 - Using the ReflectionParameter class
• Example#5280 - Getting the class that declared the method
• Example#5281 - Getting default values of function parameters
• Example#5282 - Getting default values' constant names of function parameters
• Example#5283 - ReflectionParameter::getType Usage as of PHP 7.1.0
• Example#5284 - ReflectionParameter::getType Usage before PHP 7.1.0
• Example#5285 - ReflectionParameter::getType Usage in PHP 8.0.0 and later
• Example#5286 - ReflectionParameter::hasType example
• Example#5287 - PHP 8.0.0 equivalent
• Example#5288 - PHP 8.0.0 equivalent
• Example#5289 - ReflectionProperty::__construct example
• Example#5290 - Getting value from private and protected properties using ReflectionProperty class
• Example#5291 - ReflectionProperty::getDefaultValue example
• Example#5292 - ReflectionProperty::getDocComment example
• Example#5293 - Multiple property declarations
• Example#5294 - ReflectionProperty::getType example
• Example#5295 - ReflectionProperty::getValue example
• Example#5296 - ReflectionProperty::hasDefaultValue example
• Example#5297 - ReflectionProperty::hasType example
• Example#5298 - ReflectionProperty::isDefault example
• Example#5299 - ReflectionProperty::isInitialized example
• Example#5300 - ReflectionProperty::isPromoted example
• Example#5301 - Simple Class definition
• Example#5302 - ReflectionProperty::setValue example
• Example#5303 - ReflectionType::allowsNull example
• Example#5304 - ReflectionType::__toString example
• Example#5305 - ReflectionUnionType::getTypes example
• Example#5306 - ReflectionGenerator::__construct example
• Example#5307 - ReflectionGenerator::getExecutingFile example
• Example#5308 - ReflectionGenerator::getExecutingGenerator example
• Example#5309 - ReflectionGenerator::getExecutingLine example
• Example#5310 - ReflectionGenerator::getFunction example
• Example#5311 - ReflectionGenerator::getThis example
• Example#5312 - ReflectionGenerator::getTrace example
• Example#5313 - ReflectionIntersectionType::getTypes example
• Example#5314 - Basic ReflectionReference::getId usage
• Example#5315 - boolval examples
• Example#5316 - debug_zval_dump example
• Example#5317 -
• Example#5318 - A simple empty / isset comparison.
• Example#5319 - empty on String Offsets
• Example#5320 - floatval Example
• Example#5321 - floatval non-numeric leftmost characters Example
• Example#5322 - get_debug_type example
• Example#5323 - get_defined_vars Example
• Example#5324 - get_resource_id produces the same result as an int cast
• Example#5325 - get_resource_type example
• Example#5326 - gettype example
• Example#5327 - intval examples
• Example#5328 - Check that variable is an array
• Example#5329 - is_bool examples
• Example#5330 - is_callable example
• Example#5331 - is_callable and constructors
• Example#5332 - is_countable examples
• Example#5333 - is_float example
• Example#5334 - is_int example
• Example#5335 - is_iterable examples
• Example#5336 - is_null example
• Example#5337 - is_numeric examples
• Example#5338 - is_numeric with whitespace
• Example#5339 - is_object example
• Example#5340 - is_resource example
• Example#5341 - is_scalar example
• Example#5342 - is_string example
• Example#5343 - isset Examples
• Example#5344 - isset on String Offsets
• Example#5345 - print_r example
• Example#5346 - return parameter example
• Example#5347 - serialize example
• Example#5348 - settype example
• Example#5349 - strval example using PHP magic __toString() method.
• Example#5350 - unserialize example
• Example#5351 - unserialize_callback_func example
• Example#5352 - unset example
• Example#5353 - Using (unset) casting
• Example#5354 - var_dump example
• Example#5355 - var_export Examples
• Example#5356 - Exporting stdClass (since PHP 7.3.0)
• Example#5357 - Exporting classes
• Example#5358 - Using __set_state()
• Example#5359 -
• Example#5360 - OAuth::fetch example
• Example#5361 - OAuth::getAccessToken example
• Example#5362 - OAuth::getRequestToken example
• Example#5363 - OAuth::setRequestEngine example
• Example#5364 - An OAuth::setRsaCertificate example
• Example#5365 - OAuth::setToken example
• Example#5366 - OAuthProvider::__construct example
• Example#5367 - Example OAuthProvider::consumerHandler callback
• Example#5368 - OAuthProvider::generateToken example
• Example#5369 - OAuthProvider::is2LeggedEndpoint example
• Example#5370 - Example OAuthProvider::timestampNonceHandler callback
• Example#5371 - Example OAuthProvider::tokenHandler callback
• Example#5372 - is_soap_fault example
• Example#5373 - SOAP's standard method for error reporting is exceptions
• Example#5374 - Specifying use of TLS 1.3 only
• Example#5375 - SoapClient::__construct example
• Example#5376 - Using the SOAP_SINGLE_ELEMENT_ARRAYS feature
• Example#5377 - SoapClient::__doRequest example
• Example#5378 - SoapClient::__getFunctions example
• Example#5379 - SoapClient::__getLastRequest() example
• Example#5380 - SoapClient::__getLastRequestHeaders() example
• Example#5381 - SoapClient::__getLastResponse() example
• Example#5382 - SoapClient::__getLastResponse() example
• Example#5383 - SoapClient::__getTypes example
• Example#5384 - SoapClient::__setLocation example
• Example#5385 - SoapClient::__setSoapHeaders example
• Example#5386 - Set Multiple Headers
• Example#5387 - SoapClient::__soapCall example
• Example#5388 - SoapServer::addFunction example
• Example#5389 - SoapServer::__construct example
• Example#5390 - SoapServer::getFunctions example
• Example#5391 - SoapServer::handle example
• Example#5392 - SoapServer::setPersistence example
• Example#5393 - Some examples
• Example#5394 - Some examples
• Example#5395 - SoapHeader::__construct example
• Example#5396 - SoapParam::__construct example
• Example#5397 - SoapVar::__construct example
• Example#5398 - Yar Server Example
• Example#5399 - Access the server in borwser(GET request)
• Example#5400 - Yar Client Example
• Example#5401 - Yar Concurrent Client Example
• Example#5402 - Yar_Server::__construct example
• Example#5403 - Yar_Server::handle example
• Example#5404 - Yar_Client::__call example
• Example#5405 - Yar_Client::__construct example
• Example#5406 - Yar_Client::setOpt example
• Example#5407 - Yar_Concurrent_Client::call example
• Example#5408 - Yar_Concurrent_Client::loop example
• Example#5409 - Yar_Concurrent_Client::reset example
• Example#5410 - Yar_Server_Exception::getType example
• Example#5411 - Yar_Client_Exception::getType example
• Example#5412 - XMLRPC client functions example
• Example#5413 - XML-RPC type example
• Example#5414 - A xmlrpc_set_type example
• Example#5415 - For Each in ASP
• Example#5416 - foreach in PHP
• Example#5417 - com example (1)
• Example#5418 - com example (2)
• Example#5419 - dotnet example
• Example#5420 - variant example
• Example#5421 - Basic COMPersistHelper::saveToFile Usage
• Example#5422 - COM event sink example
• Example#5423 - Registering a PHP script to run as a service
• Example#5424 - Unregistering a service
• Example#5425 - Running as a service
• Example#5426 - A win32_create_service example
• Example#5427 - A win32_create_service example with dependencies
• Example#5428 - A win32_create_service example with recovery
• Example#5429 - A win32_delete_service example
• Example#5430 - A win32_start_service_ctrl_dispatcher example
• Example#5431 - book.xml
• Example#5432 - Creating a new DOMAttr object
• Example#5433 - DOMAttr::isId() Example
• Example#5434 - Creating a new DOMCdataSection object
• Example#5435 - Creating a new DOMComment
• Example#5436 - Creating a new DOMDocument
• Example#5437 - Creating a new element and inserting it as root
• Example#5438 - Passing text containing an unescaped & as value
• Example#5439 - Creating a new element and inserting it as root
• Example#5440 - A namespace prefix example
• Example#5441 - DOMDocument::getElementById() Example
• Example#5442 - Basic Usage Example
• Example#5443 - Get all the XInclude elements
• Example#5444 - DOMDocument::importNode example
• Example#5445 - Creating a Document
• Example#5446 - Creating a Document
• Example#5447 - Creating a Document
• Example#5448 - Creating a Document
• Example#5449 - Static invocation of loadXML
• Example#5450 - Adding a new method to DOMElement to ease our code
• Example#5451 - Retrieving elements as custom class
• Example#5452 - Retrieving owner document
• Example#5453 - Custom objects are transient
• Example#5454 - Saving a DOM tree into a file
• Example#5455 - Saving a HTML tree into a string
• Example#5456 - Saving a HTML tree into a file
• Example#5457 - Saving a DOM tree into a string
• Example#5458 - Example of DTD validation
• Example#5459 - DOMDocument::xinclude() example
• Example#5460 - Appending XML data to your document
• Example#5461 - Creating a new DOMElement
• Example#5462 - Setting an attribute
• Example#5463 - Creating a new DOMEntityReference
• Example#5464 - Creating a document with an attached DTD
• Example#5465 - Testing your DOM Implementation
• Example#5466 - Adding a child
• Example#5467 - Nested children
• Example#5468 - DOMNode::getLineNo example
• Example#5469 - DOMNode::getNodePath example
• Example#5470 - Removing a child
• Example#5471 - Traversing all the entries of the table
• Example#5472 - Creating a new DOMProcessingInstruction object
• Example#5473 - Creating a new DOMText
• Example#5474 - Getting the count of all the english books
• Example#5475 - Getting all the english books
• Example#5476 - book.xml
• Example#5477 - DOMXPath::registerPHPFunctions with php:functionString
• Example#5478 - DOMXPath::registerPHPFunctions with php:function
• Example#5479 - Import SimpleXML into DOM with dom_import_simplexml
• Example#5480 - A libxml_get_errors example
• Example#5481 - libxml_set_external_entity_loader example
• Example#5482 - A libxml_set_streams_context example
• Example#5483 - A libxml_use_internal_errors example
• Example#5484 - Include file example.php with XML string
• Example#5485 - Getting <plot>
• Example#5486 - Getting <line>
• Example#5487 - Accessing non-unique elements in SimpleXML
• Example#5488 - Using attributes
• Example#5489 - Comparing Elements and Attributes with Text
• Example#5490 - Comparing Two Elements
• Example#5491 - Using XPath
• Example#5492 - Setting values
• Example#5493 - Adding elements and attributes
• Example#5494 - DOM Interoperability
• Example#5495 - Loading broken XML string
• Example#5496 - Add attributes and children to a SimpleXML element
• Example#5497 - Add attributes and children to a SimpleXML element
• Example#5498 - Get XML
• Example#5499 - Using asXML() on SimpleXMLElement::xpath results
• Example#5500 - Interpret an XML string
• Example#5501 - Traversing a children() pseudo-array
• Example#5502 - Using namespaces
• Example#5503 - Create a SimpleXMLElement object
• Example#5504 - Create a SimpleXMLElement object from a URL
• Example#5505 - Counting the number of children
• Example#5506 - Get document namespaces
• Example#5507 - Working with multiple namespaces
• Example#5508 - Get XML element names
• Example#5509 - Get document namespaces in use
• Example#5510 - Setting a namespace prefix to use in an XPath query
• Example#5511 - Get string content
• Example#5512 - Xpath
• Example#5513 - Return the current element
• Example#5514 - Return the sub-elements of the current element
• Example#5515 - Check whether the current element has sub-elements
• Example#5516 - Get the current XML tag key
• Example#5517 - Move to the next element
• Example#5518 - Rewind to the first element
• Example#5519 - Check whether the current element is valid
• Example#5520 - Importing DOM
• Example#5521 - Interpret an XML document
• Example#5522 - Interpret an XML string
• Example#5523 - Serializing a single value with WDDX
• Example#5524 - Using incremental packets with WDDX
• Example#5525 - wddx_serialize_vars example
• Example#5526 - Show XML Element Structure
• Example#5527 - Map XML to HTML
• Example#5528 - External Entity Example
• Example#5529 - xmltest.xml
• Example#5530 - xmltest2.xml
• Example#5531 - xml_parse_into_struct example
• Example#5532 - moldb.xml - small database of molecular information
• Example#5533 - parsemoldb.php - parses moldb.xml into an array of molecular objects
• Example#5534 - Chunked parsing of large XML documents
• Example#5535 - xml_set_object example
• Example#5536 - Validating XML
• Example#5537 - Creating a simple XML document
• Example#5538 - Working with XML namespaces
• Example#5539 - Working with the OO API
• Example#5540 - Direct output of XML
• Example#5541 - XMLWriter::setIndent and mixed Content
• Example#5542 - Basic XMLWriter::startAttribute Usage
• Example#5543 - Intermixing Sub-elements and Attributes
• Example#5544 - Basic xmlwriter_write_cdata Usage
• Example#5545 - collection.xml
• Example#5546 - collection.xsl
• Example#5547 - fruits.xml
• Example#5548 - fruits.xsl
• Example#5549 - Collating and printing errors
• Example#5550 - Creating an XSLTProcessor
• Example#5551 - Testing EXSLT support
• Example#5552 - Simple PHP Function call from a stylesheet
• Example#5553 - Changing the owner before the transformation
• Example#5554 - Example profiling output
• Example#5555 - Transforming to a DOMDocument
• Example#5556 - Transforming to a HTML file
• Example#5557 - Transforming to a string
• Example#5558 - A hidden HTML form element
• Example#5559 - Data to be edited by the user
• Example#5560 - In a URL
• Example#5561 - Generating Javascript with PHP
• Example#5562 - Example PHP/FI Code
• Example#5563 - Activate full on-screen error reporting for dev. domain
• Example#5564 - Add security script for protected areas
• Example#5565 - Unix include_path
• Example#5566 - Windows include_path
• Example#5567 - Unix include_path using ${USER} env variable
• Example#5568 - string.rot13
• Example#5569 - string.toupper
• Example#5570 - string.tolower
• Example#5571 - string.strip_tags
• Example#5572 - convert.base64-encode & convert.base64-decode
• Example#5573 - convert.quoted-printable-encode & convert.quoted-printable-decode
• Example#5574 - convert.iconv.*
• Example#5575 - zlib.deflate and zlib.inflate
• Example#5576 - zlib.deflate simple
• Example#5577 - bzip2.compress and bzip2.decompress
• Example#5578 - Encrypt/Decrypt with Blowfish
• Example#5579 - Encrypt file using AES-128 CBC with SHA256 HMAC